| 手机: | 13424755533 |
| 联系人: | 赵先生 |
| 地址: | 广东省东莞市樟木头镇香樟绿洲 |
Polyplastics Duranex® 600JP Polybutylene Terephthalate (PBT), Unfilled PBT for film, Extrusion, Low melting point Polyplastics Duranex® 700FP Polybutylene Terephthalate (PBT), Unfilled PBT for film, Extrusion, High Viscosity Polyplastics Duranex® 500FP Polybutylene Terephthalate (PBT), Unfilled PBT for film, Extrusion Polyplastics Duranex® 800FP Polybutylene Terephthalate (PBT), Unfilled PBT for film, Extrusion, Super High Viscosity
Polyplastics Duranex® 7407 Polybutylene Terephthalate (PBT), Super low warpage, GF filled Polyplastics Duranex® 2002 Polybutylene Terephthalate (PBT), Standard Polyplastics Duranex® 3105 Polybutylene Terephthalate (PBT), Standard, 15% GF filled Polyplastics Duranex® 3400 Polybutylene Terephthalate (PBT), Standard, 40% GF filled Polyplastics Duranex® 3300 Polybutylene Terephthalate (PBT), Standard, 30% GF filled
Polyplastics Duranex® 3105H Polybutylene Terephthalate (PBT), Standard, 15% GF filled Polyplastics Duranex® 7407 Polybutylene Terephthalate (PBT), Super low warpage, GF filled Polyplastics Duranex® 3100H Polybutylene Terephthalate (PBT), Standard, 7.5% GF filled Ovation Polymers RIGITRON 20415 GF PBT, 15% Glass Reinforced Polyplastics Duranex® 3300H Polybutylene Terephthalate (PBT), Standard, 30% GF filled Polyplastics Duranex® 7407 Polybutylene Terephthalate (PBT), Super low warpage, GF filled Polyplastics Duranex® 3105 Polybutylene Terephthalate (PBT), Standard, 15% GF filled Polyplastics Duranex® 3400 Polybutylene Terephthalate (PBT), Standard, 40% GF filled Polyplastics Duranex® 3300 Polybutylene Terephthalate (PBT), Standard, 30% GF filled Polyplastics Duranex® 3300H Polybutylene Terephthalate (PBT), Standard, 30% GF filled Polyplastics Duranex® 200FP Polybutylene Terephthalate (PBT), Unfilled PBT for film, Extrusion, Super High Flow
Duranex 3216 PBT特点：阻燃，15%的玻璃纤维增强，可回收材料。家用器具（食品加工刀片、真空吸尘器元件、电风扇、头发干燥机壳体、咖啡器皿等），电器元件（开关、电机壳、保险丝盒、计算机键盘按键等），汽车工业（散热器格窗、车身嵌板、车轮盖、门窗部件等）。（国际）塑胶原料有限公司可提供MSDS,SGS(ROHS),UL黄卡，FDA,COA,ASTM,物性表等相关资料。
|
品牌 |
Duranex/PBT |
|
材质 |
PBT |
|
供货商类型 |
分销商 |
|
产品规格 |
25kg/袋 |
|
产品包装 |
原厂原包 |
|
货品运输 |
可按客户要求 |
|
交货方式 |
现金或货到付款 |
|
发货期限 |
一天内 |
|
其他 |
电议 |
PBT为乳白色半透明到不透明、结晶型热塑性聚酯。具有高耐热性、韧性、耐疲劳性，自润滑、低摩
ccp PBT擦数，耐候性、吸水率低，仅为0.1%，在潮湿环境中仍保持各种物性（包括电性能），电绝缘性，但体积电阻、介电损耗大。耐热水、碱类、酸类、油类、但易受卤化烃侵蚀，耐水解性差，低温下可迅速结晶，成型性良好。缺点是缺口冲击强度低 ，成型收缩率大 。故大部分采用玻璃纤维增强或无机填充改性，其拉伸强度、弯曲强度可提高一倍以上，热变形温度也大幅提高。可以在140℃下长期工作，玻纤增强后制品纵、横向收缩率不一致，易使制品发生翘曲。
干燥处理：这种材料在高温下很容易水解，因此加工前的干燥处理是很重要的。建议在空气中的干燥条件为120℃，6~8小时，或者150℃，2~4小时。湿度必须小于0.03%。如果用吸湿干燥器干燥，建议条件为150℃，2.5小时。
熔化温度：225~275℃，建议温度：250℃。
模具温度：对于未增强型的材料为40~60℃。要很好地设计模具的冷却腔道以减小塑件的弯曲。热量的散失一定要快而均匀。建议模具冷却腔道的直径为12mm。
注射压力：中等（最大到1500bar）。
注射速度：应使用尽可能快的注射速度（因为PBT的凝固很快）。
流道和浇口:建议使用圆形流道以增加压力的传递（经验公式：流道直径=塑件厚度+1.5mm）。可以使用各种型式的浇口。也可以使用热流道，但要注意防止材料的渗漏和降解。浇口直径应该在0.8~1.0*t之间，这里t是塑件厚度。如果是潜入式浇口，建议最小直径为0.75mm。
| Polyplastics Duranex® 3216 Polybutylene Terephthalate (PBT), Standard, FR, UL approved regrind 50%, 15% GF filled | |||
|---|---|---|---|
| Categories: | Polymer; Thermoplastic; Filled/Reinforced Thermoplastic; Polyester, TP; Polybutylene Terephthalate (PBT); Polybutylene Terephthalate (PBT), 20% Glass Fiber Filled | ||
| Material Notes: | DURANEX® is a crystalline thermoplastic based on polybutylene terephthalate (PBT) that can be readily strengthened, modified, or otherwise performance enhanced through the addition of glass fibers or other inorganic filler additives. Therefore, as grades can be optimally designed depending on the application, various grades are provided, including flame-retardant grades, reinforced grades, and impact-resistant grades.
DURANEX®, due to its mechanical strength, heat stability, electrical resistivity and wear and abrasion-resistance, offers great potential as a well-balanced, highly reliable material, having a wide variety of applications including electronic / electro-mechanical and automobile parts and various other functional parts. Not only does it have well-balanced properties as a raw material, DURANEX® also assures moldability, dimensional stability, glossy surfaces and various fabrication capabilities providing higher added value. Information provided by PolyPlastics. | ||
| Vendors: | No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material. | ||
| |||
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.54 g/cc | 0.0556 lb/in³ | ISO 1183 |
| Filler Content | 15.0 % | 15.0 % | Glass fiber |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 113 MPa | 16400 psi | ISO 527-1, 2 |
| Elongation at Break | 2.70 % | 2.70 % | ISO 527-1, 2 |
| Flexural Modulus | 6.05 GPa | 877 ksi | ISO 178 |
| Flexural Strength | 173 MPa | 25100 psi | ISO 178 |
| Charpy Impact, Notched | 0.710 J/cm² | 3.38 ft-lb/in² | ISO 179/1eA |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 2.00e+16 ohm-cm | 2.00e+16 ohm-cm | IEC 60093 |
| Surface Resistance | 4.00e+16 ohm | 4.00e+16 ohm | IEC 60093 |
| Dielectric Strength | 20.0 kV/mm | 508 kV/in | IEC 60243-1 |
| Comparative Tracking Index | 250 V | 250 V | IEC 60112 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 40.0 µm/m-°C@Temperature 23.0 - 55.0 °C | 22.2 µin/in-°F@Temperature 73.4 - 131 °F | ISO 11359-2 |
| CTE, linear, Transverse to Flow | 100 µm/m-°C@Temperature 23.0 - 55.0 °C | 55.6 µin/in-°F@Temperature 73.4 - 131 °F | ISO 11359-2 |
| Deflection Temperature at 1.8 MPa (264 psi) | 208 °C | 406 °F | ISO 75-1, 2 |
| Flammability, UL94 | V-0 | V-0 | |
本公司主营产品：
一：泛用料：ABS、PP。
二：工程料：PC、PC/ABS、PA6、PA66、PA11、PA12、PA612、TPU、TPE、TPEE、TPV、LCP、PPS、PPO、PBT、PET、PMMA、POM等。
企业文化：“用劳动创造财富”；企业宗旨：“诚信经营，顾客至上”。
提 供：（国际）塑胶贸易有限公司
公司网址：
QQ：
塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。
2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家