| 手机: | 13424755533 |
| 联系人: | 赵先生 |
| 地址: | 广东省东莞市樟木头镇香樟绿洲 |
|
品牌 |
Celanex PBT |
|
材质 |
PBT |
|
供货商类型 |
分销商 |
|
产品规格 |
25kg/袋 |
|
产品包装 |
原厂原包 |
|
货品运输 |
可按客户要求 |
|
交货方式 |
现金或货到付款 |
|
发货期限 |
一天内 |
|
其他 |
电议 |
| Ticona CELANEX 4302HS PBT, 30% Glass Reinforced | |||
|---|---|---|---|
| Categories: | Polymer; Thermoplastic; Polyester, TP; Polybutylene Terephthalate (PBT); Polybutylene Terephthalate (PBT), 30% Glass Fiber Filled | ||
| Material Notes: | Celanex 4302HS is a 30% glass reinforced PBT designed for improved mold flow, warp resistance and surface appearance. Celanex 4302HS is ideally suited for heat shock applications such as ignition coil housings and coil-on-plug housings. Celanex 4302HS alsTo avoid hydrolytic degradation during processing, CELANEX resins have to be dried to a moisture level equal to or less than 0.02%. Drying should be done in a dehumidifying hopper dryer capable of dewpoints <-40°F (-40°C) at 250°F (121°C) for 4 hours.For subsequent storage of the material in the dryer until processed (<= 60 h) it is necessary to lower the temperature to 100° C.
Information provided by Ticona | ||
| Key Words: | 30% glass filled, heat shock resistant, hydrolysis resistant | ||
| Vendors: | No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material. | ||
| |||
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.49 g/cc | 1.49 g/cc | ASTM D792 |
| Density | 1.49 g/cc | 0.0538 lb/in³ | ISO 1183 |
| Water Absorption | 0.150 % | 0.150 % | 23°C/50%RH; ISO 62 |
| Linear Mold Shrinkage, Flow | 0.00200 - 0.00400 cm/cm | 0.00200 - 0.00400 in/in | ISO 294-4 |
| 0.00300 cm/cm | 0.00300 in/in | ASTM D955 | |
| Linear Mold Shrinkage, Transverse | 0.00400 - 0.00600 cm/cm | 0.00400 - 0.00600 in/in | ISO 294-4 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength at Break | 120 MPa | 17400 psi | 5mm/min; ISO 527-2/1A |
| 110 MPa@Temperature 22.8 °C | 16000 psi@Temperature 73.0 °F | ASTM D638 | |
| Elongation at Break | 2.80 % | 2.80 % | 5mm/min; ISO 527-2/1A |
| 3.00 %@Temperature 22.8 °C | 3.00 %@Temperature 73.0 °F | ASTM D638 | |
| Tensile Modulus | 8.50 GPa | 1230 ksi | 1mm/min; ISO 527-2/1A |
| Flexural Stiffness | 172 MPa@Temperature 22.8 °C | 25000 psi@Temperature 73.0 °F | ASTM D790 |
| Flexural Modulus | 8.70 GPa | 1260 ksi | ISO 178 |
| 7.58 GPa@Temperature 22.8 °C | 1100 ksi@Temperature 73.0 °F | ASTM D790 | |
| Flexural Strength | 190 MPa | 27600 psi | ISO 178 |
| Charpy Impact Unnotched | 5.60 J/cm² | 26.6 ft-lb/in² | ISO 179/1eU |
| 4.10 J/cm²@Temperature 30.0 °C | 19.5 ft-lb/in²@Temperature 86.0 °F | ISO 179/1eU | |
| Charpy Impact, Notched | 0.990 J/cm² | 4.71 ft-lb/in² | ISO 179/1eA |
| 0.830 J/cm²@Temperature 30.0 °C | 3.95 ft-lb/in²@Temperature 86.0 °F | ISO 179/1eA | |
| Izod Impact, Notched | 1.17 J/cm@Temperature 22.8 °C | 2.20 ft-lb/in@Temperature 73.0 °F | ASTM D256 |
| Izod Impact, Notched (ISO) | 13.9 kJ/m² | 6.61 ft-lb/in² | ISO 180/1A |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 2.00e+14 ohm-cm | 2.00e+14 ohm-cm | IEC 60093 |
| Surface Resistance | 1.00e+17 ohm | 1.00e+17 ohm | IEC 60093 |
| Dielectric Constant | 2.50@Frequency 1.00e+6 Hz | 2.50@Frequency 1.00e+6 Hz | IEC 60250 |
| 3.20@Frequency 100 Hz | 3.20@Frequency 100 Hz | IEC 60250 | |
| Dielectric Strength | 19.0 kV/mm | 483 kV/in | IEC 60243-1 |
| 21.1 kV/mm | 536 kV/in | short term; ASTM D149 | |
| Dissipation Factor | 0.0100@Frequency 1.00e+6 Hz | 0.0100@Frequency 1.00e+6 Hz | IEC 60250 |
| Comparative Tracking Index | 300 V | 300 V | IEC 60112 |
TICONA Celanex 3400-2
TICONA Celanex 4306
TICONA Celanex 5200-2
TICONA Celanex 5200
TICONA Celanex 5205HG
TICONA Celanex 5214HF
TICONA Celanex 5300-2
TICONA Celanex 5300-2UV
TICONA Celanex 531HS
TICONA Celanex 602AC
TICONA Celanex 6035GB20
TICONA Celanex 6400-2
TICONA Celanex 6402R
TICONA Celanex 6406
TICONA Celanex 6407
TICONA Celanex 6407HR
TICONA Celanex 6500
TICONA Celanex 6500HF
Celanex 4302HS PBT特点：良好的表面光洁度，30%的玻璃纤维增强，良好的附着力，抗弯曲。
处理方法：注塑成型。
应用范围：家用器具（食品加工刀片、真空吸尘器元件、电风扇、头发干燥机壳体、咖啡器皿等），电器元件（开关、电机壳、保险丝盒、计算机键盘按键等），汽车工业（散热器格窗、车身嵌板、车轮盖、门窗部件等）。（国际）塑胶贸易有限公司-Celanex PBT，可提供COC,SGS,物性表，等相关资料。
本公司主营产品：
一：泛用料：ABS、PP。
二：工程料：PC、PC/ABS、PA6、PA66、PA11、PA12、PA612、TPU、TPE、TPEE、TPV、LCP、PPS、PPO、PBT、PET、PMMA、POM等。
企业文化：“用劳动创造财富”；企业宗旨：“诚信经营，顾客至上”。
提 供：（国际）塑胶贸易有限公司
公司网址：
QQ：
塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。
2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家