Ticona CELANEX 3325HRT PBT, 30% Glass Reinforced | |||
---|---|---|---|
Categories: | Polymer; Thermoplastic; Polyester, TP; Polybutylene Terephthalate (PBT); Polybutylene Terephthalate (PBT), 30% Glass Fiber Filled | ||
Material Notes: | Celanex 3325HRT is a non-lubricated, 30% fiberglass reinforced Polybutylene Terephthalate copolymer that has excellent hydrolysis resistance, toughness, improved flow, and improved elongation at break.To avoid hydrolytic degradation during processing, CELANEX resins have to be dried to a moisture level equal to or less than 0.02%. Drying should be done in a dehumidifying hopper dryer capable of dewpoints <-40°F (-40°C) at 250°F (121°C) for 4 hours.For subsequent storage of the material in the dryer until processed (<= 60 h) it is necessary to lower the temperature to 100° C.
Information provided by Ticona | ||
Key Words: | 30% glass reinforced, copolyester, hydrolysis resistant, toughened | ||
Vendors: | No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material. | ||
|
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.46 g/cc | 0.0527 lb/in³ | ISO 1183 |
Water Absorption | 0.160 % | 0.160 % | 23°C/50%RH; ISO 62 |
Linear Mold Shrinkage, Flow | 0.000 - 0.00500 cm/cm | 0.000 - 0.00500 in/in | ISO 294-4 |
0.00200 - 0.00400 cm/cm | 0.00200 - 0.00400 in/in | ASTM D955 | |
Linear Mold Shrinkage, Transverse | 0.00600 cm/cm | 0.00600 in/in | ISO 294-4 |
Mechanical Properties | Metric | English | Comments |
Tensile Strength at Break | 100 MPa | 14500 psi | 5mm/min; ISO 527-2/1A |
Elongation at Break | 3.90 % | 3.90 % | 5mm/min; ISO 527-2/1A |
Tensile Modulus | 7.60 GPa | 1100 ksi | 1mm/min; ISO 527-2/1A |
Flexural Modulus | 7.30 GPa | 1060 ksi | ISO 178 |
Flexural Strength | 160 MPa | 23200 psi | ISO 178 |
Charpy Impact Unnotched | 3.00 J/cm² | 14.3 ft-lb/in² | ISO 179/1eU |
4.60 J/cm²@Temperature 30.0 °C | 21.9 ft-lb/in²@Temperature 86.0 °F | ISO 179/1eU | |
Charpy Impact, Notched | 1.32 J/cm² | 6.28 ft-lb/in² | ISO 179/1eA |
0.940 J/cm²@Temperature 30.0 °C | 4.47 ft-lb/in²@Temperature 86.0 °F | ISO 179/1eA | |
Izod Impact, Notched (ISO) | 13.6 kJ/m² | 6.47 ft-lb/in² | ISO 180/1A |
Electrical Properties | Metric | English | Comments |
Volume Resistivity | 2.00e+14 ohm-cm | 2.00e+14 ohm-cm | IEC 60093 |
1.30e+16 ohm-cm | 1.30e+16 ohm-cm | ASTM D257 | |
Surface Resistance | 8.60e+16 ohm | 8.60e+16 ohm | ASTM D257 |
2.00e+17 ohm | 2.00e+17 ohm | IEC 60093 | |
Dielectric Constant | 2.90@Frequency 100 Hz | 2.90@Frequency 100 Hz | IEC 60250 |
3.30@Frequency 1.00e+6 Hz | 3.30@Frequency 1.00e+6 Hz | ASTM D150 | |
3.40@Frequency 1.00e+6 Hz | 3.40@Frequency 1.00e+6 Hz | IEC 60250 | |
Dielectric Strength | 19.3 kV/mm | 489 kV/in | short term; ASTM D149 |
32.0 kV/mm | 813 kV/in | IEC 60243-1 | |
Dissipation Factor | 0.0150@Frequency 1.00e+6 Hz | 0.0150@Frequency 1.00e+6 Hz | IEC 60250 |
0.0160@Frequency 1.00e+6 Hz | 0.0160@Frequency 1.00e+6 Hz | ASTM D150 | |
Arc Resistance | 122 sec | 122 sec | ASTM D495 |
Comparative Tracking Index | 375 V | 375 V | IEC 60112 |
573 V | 573 V | ASTM D3638 | |
Thermal Properties | Metric | English | Comments |
CTE, linear, Parallel to Flow | 21.0 µm/m-°C | 11.7 µin/in-°F | ISO 11359-2 |
CTE, linear, Transverse to Flow | 123 µm/m-°C | 68.3 µin/in-°F | ISO 11359-2 |
Melting Point | 225 °C | 437 °F | ISO 11357-1,-2,-3 |
Deflection Temperature at 0.46 MPa (66 psi) | 206 °C | 403 °F | ISO 75-1, -2 |
Deflection Temperature at 1.8 MPa (264 psi) | 184 °C | 363 °F | ISO 75-1, -2 |
Glass Transition Temp, Tg | 19.0 °C | 66.2 °F | ISO 11357-1,-2,-3 |
Celanex 3325HRT PBT特点:共聚物,30%的玻璃纤维增强,良好的韧性,抗水解。
处理方法:注塑成型。
应用范围:家用器具(食品加工刀片、真空吸尘器元件、电风扇、头发干燥机壳体、咖啡器皿等),电器元件(开关、电机壳、保险丝盒、计算机键盘按键等),汽车工业(散热器格窗、车身嵌板、车轮盖、门窗部件等)。(国际)塑胶贸易有限公司-Celanex PBT,可提供COC,SGS,物性表,等相关资料。
本公司主营产品:
一:泛用料:ABS、PP。
二:工程料:PC、PC/ABS、PA6、PA66、PA11、PA12、PA612、TPU、TPE、TPEE、TPV、LCP、PPS、PPO、PBT、PET、PMMA、POM等。
企业文化:“用劳动创造财富”;企业宗旨:“诚信经营,顾客至上”。
提 供:(国际)塑胶贸易有限公司
公司网址:
QQ:
塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。
2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家