塑胶原料之家
  1. 首页
  2. 资讯
  3. 产品资讯
  4. PA66 11C40 NC010 Nylon 66自润滑性

PA66 11C40 NC010 Nylon 66自润滑性

PA66 11C40 NC010 透明或不透明乳白色结晶形聚合物，具有可塑性。PA66 11C40 NC010密度1．15g/cm3。熔点252℃。脆化温度-30℃。热分解温度大于350℃。 PA66 11C40 NC010连续耐热80-120℃,平衡吸水率2．5%。能耐酸、碱、大多数无机盐水溶液、卤代烷、烃类、酯类、酮类等腐蚀。
 PA66 11C40 NC010 Nylon 66熔化温度：260~290℃。对玻璃添加剂的产品为275~280℃。熔化温度应避免高于300℃。 模具温度：建议80℃。模具温度将影响结晶度，而结晶度将影响产品的物理特性。对于薄壁塑件，如果使用低于40℃的模具温度，则塑件的结晶度将随着时间而变化，为了保持塑件的几何稳定性，需要进行退火处理。
 物性表：
Physical Properties Metric English Comments
Density  1.47 g/cc 0.0531 lb/in³ DAM; ISO 1183
Water Absorption  6.0 %
@Thickness 2.00 mm		 6.0 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Moisture Absorption  1.60 %
@Thickness 2.00 mm		 1.60 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Water Absorption at Saturation  1.1 % 1.1 % DAM; Immersion 24h; ASTM D570
Linear Mold Shrinkage, Flow  0.0090 cm/cm 0.0090 in/in DAM; ISO 294-4 2577
Linear Mold Shrinkage, Transverse  0.0090 cm/cm 0.0090 in/in DAM; ISO 294-4 2577
 
Mechanical Properties Metric English Comments
Tensile Strength at Break  63.0 MPa 9140 psi 50%RH; ISO 527-1/-2
  90.0 MPa 13100 psi DAM; ISO 527-1/-2
Tensile Stress    3.93 MPa
@Strain 0.500 %,
Temperature 150 °C		 570 psi
@Strain 0.500 %,
Temperature 302 °F		 50%RH; ISO 11403-1 -2
  6.20 MPa
@Strain 0.700 %,
Temperature 150 °C		 899 psi
@Strain 0.700 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  10.38 MPa
@Strain 1.70 %,
Temperature 150 °C		 1505 psi
@Strain 1.70 %,
Temperature 302 °F		 50%RH; ISO 11403-1 -2
  11.76 MPa
@Strain 0.500 %,
Temperature 23.0 °C		 1706 psi
@Strain 0.500 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  16.06 MPa
@Strain 3.50 %,
Temperature 150 °C		 2329 psi
@Strain 3.50 %,
Temperature 302 °F		 50%RH; ISO 11403-1 -2
  17.0 MPa
@Strain 2.70 %,
Temperature 150 °C		 2470 psi
@Strain 2.70 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  19.0 MPa
@Strain 5.00 %,
Temperature 150 °C		 2760 psi
@Strain 5.00 %,
Temperature 302 °F		 50%RH; ISO 11403-1 -2
  19.43 MPa
@Strain 0.300 %,
Temperature -40.0 °C		 2818 psi
@Strain 0.300 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  20.27 MPa
@Strain 1.00 %,
Temperature 23.0 °C		 2940 psi
@Strain 1.00 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  24.6 MPa
@Strain 6.00 %,
Temperature 150 °C		 3570 psi
@Strain 6.00 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  27.27 MPa
@Strain 0.500 %,
Temperature 0.000 °C		 3955 psi
@Strain 0.500 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  29.7 MPa
@Strain 13.0 %,
Temperature 150 °C		 4310 psi
@Strain 13.0 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  30.03 MPa
@Strain 1.90 %,
Temperature 23.0 °C		 4355 psi
@Strain 1.90 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  30.3 MPa
@Strain 0.500 %,
Temperature 0.000 °C		 4390 psi
@Strain 0.500 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  33.3 MPa
@Strain 0.600 %,
Temperature 23.0 °C		 4830 psi
@Strain 0.600 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  36.3 MPa
@Strain 0.500 %,
Temperature -40.0 °C		 5260 psi
@Strain 0.500 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  42.11 MPa
@Strain 3.90 %,
Temperature 23.0 °C		 6108 psi
@Strain 3.90 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  56.33 MPa
@Strain 0.900 %,
Temperature -40.0 °C		 8170 psi
@Strain 0.900 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  58.6 MPa
@Strain 1.10 %,
Temperature 23.0 °C		 8500 psi
@Strain 1.10 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  61.78 MPa
@Strain 1.20 %,
Temperature 0.000 °C		 8960 psi
@Strain 1.20 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  63.9 MPa
@Strain 1.10 %,
Temperature 0.000 °C		 9270 psi
@Strain 1.10 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  64.161 MPa
@Strain 35.0 %,
Temperature 23.0 °C		 9305.8 psi
@Strain 35.0 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  66.1 MPa
@Strain 1.00 %,
Temperature -40.0 °C		 9590 psi
@Strain 1.00 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  70.7 MPa
@Strain 1.40 %,
Temperature 23.0 °C		 10300 psi
@Strain 1.40 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  76.3 MPa
@Strain 1.60 %,
Temperature 0.000 °C		 11100 psi
@Strain 1.60 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  78.05 MPa
@Strain 1.30 %,
Temperature -40.0 °C		 11320 psi
@Strain 1.30 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  79.8 MPa
@Strain 1.30 %,
Temperature -40.0 °C		 11600 psi
@Strain 1.30 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  80.8 MPa
@Strain 1.80 %,
Temperature 23.0 °C		 11700 psi
@Strain 1.80 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  81.1 MPa
@Strain 1.50 %,
Temperature 0.000 °C		 11800 psi
@Strain 1.50 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  84.38 MPa
@Strain 1.90 %,
Temperature 0.000 °C		 12240 psi
@Strain 1.90 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  90.91 MPa
@Strain 3.70 %,
Temperature 23.0 °C		 13190 psi
@Strain 3.70 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  93.5 MPa
@Strain 1.70 %,
Temperature -40.0 °C		 13600 psi
@Strain 1.70 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  93.7 MPa
@Strain 1.90 %,
Temperature 0.000 °C		 13600 psi
@Strain 1.90 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  96.12 MPa
@Strain 1.70 %,
Temperature -40.0 °C		 13940 psi
@Strain 1.70 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  99.88 MPa
@Strain 4.40 %,
Temperature 0.000 °C		 14490 psi
@Strain 4.40 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  112.7 MPa
@Strain 4.30 %,
Temperature 0.000 °C		 16350 psi
@Strain 4.30 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  119.4 MPa
@Strain 4.90 %,
Temperature -40.0 °C		 17320 psi
@Strain 4.90 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  128.4 MPa
@Strain 3.10 %,
Temperature -40.0 °C		 18620 psi
@Strain 3.10 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
Elongation at Break  10 % 10 % DAM; ISO 527-1/-2
  35 % 35 % 50%RH; ISO 527-1/-2
Tensile Modulus  2.60 GPa 377 ksi 50%RH; ISO 527-1/-2
  5.90 GPa 856 ksi DAM; ISO 527-1/-2
Flexural Modulus  2.00 GPa 290 ksi 50%RH; ISO 178
  5.40 GPa 783 ksi DAM; ISO 178
Secant Modulus    0.25895 GPa
@Strain 20.0 %,
Temperature 80.0 °C		 37.558 ksi
@Strain 20.0 %,
Temperature 176 °F		 DAM; ISO 11403-1 -2
  0.261286 GPa
@Strain 14.0 %,
Temperature 100 °C		 37.8969 ksi
@Strain 14.0 %,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  0.330833 GPa
@Strain 12.0 %,
Temperature 80.0 °C		 47.9840 ksi
@Strain 12.0 %,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  0.3315 GPa
@Strain 12.0 %,
Temperature 100 °C		 48.08 ksi
@Strain 12.0 %,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  0.453923 GPa
@Strain 13.0 %,
Temperature 23.0 °C		 65.8370 ksi
@Strain 13.0 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  0.509846 GPa
@Strain 6.50 %,
Temperature 100 °C		 73.9481 ksi
@Strain 6.50 %,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  0.516375 GPa
@Strain 8.00 %,
Temperature 80.0 °C		 74.8950 ksi
@Strain 8.00 %,
Temperature 176 °F		 DAM; ISO 11403-1 -2
  0.533091 GPa
@Strain 5.50 %,
Temperature 100 °C		 77.3195 ksi
@Strain 5.50 %,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  0.548333 GPa
@Strain 6.00 %,
Temperature 80.0 °C		 79.5302 ksi
@Strain 6.00 %,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  0.600652 GPa
@Strain 4.60 %,
Temperature 100 °C		 87.1186 ksi
@Strain 4.60 %,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  0.706774 GPa
@Strain 3.10 %,
Temperature 100 °C		 102.510 ksi
@Strain 3.10 %,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  0.757576 GPa
@Strain 3.30 %,
Temperature 80.0 °C		 109.879 ksi
@Strain 3.30 %,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  0.792162 GPa
@Strain 3.70 %,
Temperature 80.0 °C		 114.895 ksi
@Strain 3.70 %,
Temperature 176 °F		 DAM; ISO 11403-1 -2
  0.800 GPa
@Strain 2.20 %,
Temperature 100 °C		 116 ksi
@Strain 2.20 %,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  0.922 GPa
@Strain 5.00 %,
Temperature 23.0 °C		 134 ksi
@Strain 5.00 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  0.973333 GPa
@Strain 1.20 %,
Temperature 100 °C		 141.172 ksi
@Strain 1.20 %,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  1.02429 GPa
@Strain 1.40 %,
Temperature 80.0 °C		 148.563 ksi
@Strain 1.40 %,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  1.06556 GPa
@Strain 1.80 %,
Temperature 80.0 °C		 154.549 ksi
@Strain 1.80 %,
Temperature 176 °F		 DAM; ISO 11403-1 -2
  1.15 GPa
@Strain 0.400 %,
Temperature 100 °C		 167 ksi
@Strain 0.400 %,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  1.226 GPa
@Strain 0.500 %,
Temperature 100 °C		 177.8 ksi
@Strain 0.500 %,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  1.27 GPa
@Strain 0.500 %,
Temperature 80.0 °C		 184 ksi
@Strain 0.500 %,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  1.405 GPa
@Strain 0.600 %,
Temperature 80.0 °C		 203.8 ksi
@Strain 0.600 %,
Temperature 176 °F		 DAM; ISO 11403-1 -2
  1.44261 GPa
@Strain 2.30 %,
Temperature 23.0 °C		 209.236 ksi
@Strain 2.30 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2.027 GPa
@Strain 1.00 %,
Temperature 23.0 °C		 294.0 ksi
@Strain 1.00 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2.352 GPa
@Strain 0.500 %,
Temperature 23.0 °C		 341.1 ksi
@Strain 0.500 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  3.12069 GPa
@Strain 2.90 %,
Temperature 23.0 °C		 452.625 ksi
@Strain 2.90 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  3.35793 GPa
@Strain 2.90 %,
Temperature 0.000 °C		 487.034 ksi
@Strain 2.90 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  3.4625 GPa
@Strain 3.20 %,
Temperature 0.000 °C		 502.20 ksi
@Strain 3.20 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  3.88621 GPa
@Strain 2.90 %,
Temperature -40.0 °C		 563.656 ksi
@Strain 2.90 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  4.09727 GPa
@Strain 2.20 %,
Temperature 0.000 °C		 594.268 ksi
@Strain 2.20 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  4.22 GPa
@Strain 2.00 %,
Temperature 23.0 °C		 612 ksi
@Strain 2.00 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  4.57273 GPa
@Strain 2.20 %,
Temperature 0.000 °C		 663.229 ksi
@Strain 2.20 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  4.66412 GPa
@Strain 1.70 %,
Temperature 0.000 °C		 676.484 ksi
@Strain 1.70 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  4.78125 GPa
@Strain 1.60 %,
Temperature 23.0 °C		 693.472 ksi
@Strain 1.60 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  4.87792 GPa
@Strain 2.40 %,
Temperature -40.0 °C		 707.494 ksi
@Strain 2.40 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  5.015 GPa
@Strain 2.00 %,
Temperature -40.0 °C		 727.4 ksi
@Strain 2.00 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  5.14833 GPa
@Strain 1.20 %,
Temperature 0.000 °C		 746.714 ksi
@Strain 1.20 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  5.17059 GPa
@Strain 1.70 %,
Temperature 0.000 °C		 749.942 ksi
@Strain 1.70 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  5.32727 GPa
@Strain 1.10 %,
Temperature 23.0 °C		 772.667 ksi
@Strain 1.10 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  5.44 GPa
@Strain 1.90 %,
Temperature -40.0 °C		 789 ksi
@Strain 1.90 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  5.454 GPa
@Strain 0.500 %,
Temperature 0.000 °C		 791.0 ksi
@Strain 0.500 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  5.55 GPa
@Strain 0.600 %,
Temperature 23.0 °C		 805 ksi
@Strain 0.600 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  5.80909 GPa
@Strain 1.10 %,
Temperature 0.000 °C		 842.550 ksi
@Strain 1.10 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  5.82 GPa
@Strain 1.50 %,
Temperature -40.0 °C		 844 ksi
@Strain 1.50 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  5.83533 GPa
@Strain 1.50 %,
Temperature -40.0 °C		 846.356 ksi
@Strain 1.50 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  6.06 GPa
@Strain 0.500 %,
Temperature 0.000 °C		 879 ksi
@Strain 0.500 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  6.25889 GPa
@Strain 0.900 %,
Temperature -40.0 °C		 907.789 ksi
@Strain 0.900 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  6.47667 GPa
@Strain 0.300 %,
Temperature -40.0 °C		 939.376 ksi
@Strain 0.300 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  6.61 GPa
@Strain 1.00 %,
Temperature -40.0 °C		 959 ksi
@Strain 1.00 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  7.26 GPa
@Strain 0.500 %,
Temperature -40.0 °C		 1050 ksi
@Strain 0.500 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
Izod Impact, Notched (ISO)  7.00 kJ/m² 3.33 ft-lb/in² DAM; ISO 180/1A
  11.0 kJ/m² 5.23 ft-lb/in² 50%RH; ISO 180/1A
   5.00 kJ/m²
@Temperature -30.0 °C		 2.38 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 180/1A
  5.00 kJ/m²
@Temperature -40.0 °C		 2.38 ft-lb/in²
@Temperature -40.0 °F		 DAM; ISO 180/1A
  5.00 kJ/m²
@Temperature -40.0 °C		 2.38 ft-lb/in²
@Temperature -40.0 °F		 50%RH; ISO 180/1A
  6.00 kJ/m²
@Temperature -30.0 °C		 2.86 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 180/1A
Izod Impact, Unnotched (ISO)  150 kJ/m² 71.4 ft-lb/in² DAM; ISO 180/1U
   100 kJ/m²
@Temperature -30.0 °C		 47.6 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 180/1U
  100 kJ/m²
@Temperature -30.0 °C		 47.6 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 180/1U
Charpy Impact Unnotched  20.0 J/cm² 95.2 ft-lb/in² DAM; ISO 179/1eU
  NB NB 50%RH; ISO 179/1eU
   8.50 J/cm²
@Temperature -30.0 °C		 40.4 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eU
  10.0 J/cm²
@Temperature -30.0 °C		 47.6 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 179/1eU
Charpy Impact, Notched  0.700 J/cm² 3.33 ft-lb/in² DAM; ISO 179/1eA
  1.20 J/cm² 5.71 ft-lb/in² 50%RH; ISO 179/1eA
   0.400 J/cm²
@Temperature -30.0 °C		 1.90 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eA
 
Electrical Properties Metric English Comments
Volume Resistivity  1.00e+13 ohm-cm 1.00e+13 ohm-cm DAM; IEC 60093
Dielectric Constant    3.9
@Frequency 1.00e+6 Hz		 3.9
@Frequency 1.00e+6 Hz		 DAM; IEC 60250
  4.2
@Frequency 100 Hz		 4.2
@Frequency 100 Hz		 DAM; IEC 60250
Dielectric Strength  24.0 kV/mm 610 kV/in DAM; IEC 60243-1
Dissipation Factor    0.010
@Frequency 100 Hz		 0.010
@Frequency 100 Hz		 DAM; IEC 60250
  0.010
@Frequency 1.00e+6 Hz		 0.010
@Frequency 1.00e+6 Hz		 DAM; IEC 60250
 
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow  64.0 µm/m-°C 35.6 µin/in-°F DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow  65.0 µm/m-°C 36.1 µin/in-°F DAM; ISO 11359-1/-2
Melting Point  256 °C 493 °F DAM; 10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)  215 °C 419 °F DAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)  100 °C 212 °F DAM; ISO 75-1/-2
Flammability, UL94  HB
@Thickness 0.800 mm		 HB
@Thickness 0.0315 in		 DAM; IEC 60695-11-10
Oxygen Index  26 % 26 % DAM; ISO 4589-1/-2
 
Descriptive Properties
Additives Release agent  
Delivery form Pellets  
Part Marking Code >PA66-IMD40< ISO 11469
Processing Injection Moulding  
Regional Availability North America  
  South and Central America  
Resin Identification PA66-IMD40  
Special characteristics Heat stabilised or stable to heat
 
干燥处理：如果加工前材料是密封的，那么就没有必要干燥。然而，如果储存容器被打开，那么建议在85℃的热空气中干燥处理。如果湿度大于0.2%，还需要进行105℃，12小时的真空干燥。
颗粒03
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生  
手  机：13501802636   
QQ    ：205730283  
邮 箱 ：205730283@qq.com 
 

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/news/

本文链接: http://www.su-jiao.com/news/show-25418.html

免责声明: 本文 PA66 11C40 NC010 Nylon 66自润滑性 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他资讯信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4