PA66 8018HS NC010 耐冲击性特优_产品资讯

PA66 8018HS NC010 在产品设计时，一定要考虑吸湿性对几何稳定性的影响。为了提高PA66的机械特性，经常加入各种各样的改性剂。玻璃就是最常见的添加剂，有时为了提高抗冲击性还加入合成橡胶，如EPDM和SBR等。PA66的粘性较低，因此流动性很好（但不如PA6）。这个性质可以用来加工很薄的元件。它的粘度对温度变化很敏感。

上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。

PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。

欢迎各位客户前来咨询：

联系人：夏先生

手机：13501802636

QQ ：205730283

邮箱：205730283@qq.com

Physical Properties	Metric	English	Comments
物性表：
Density	1.19 g/cc	0.0430 lb/in³	DAM; ISO 1183
Water Absorption	6.3 % @Thickness 2.00 mm	6.3 % @Thickness 0.0787 in	DAM; Sim. to ISO 62
Moisture Absorption	1.90 % @Thickness 2.00 mm	1.90 % @Thickness 0.0787 in	DAM; Sim. to ISO 62
Viscosity Test	145 cm³/g	145 cm³/g	DAM; ISO 307 1157 1628
Linear Mold Shrinkage, Flow	0.0080 cm/cm	0.0080 in/in	DAM; ISO 294-4 2577
Linear Mold Shrinkage, Transverse	0.0070 cm/cm	0.0070 in/in	DAM; ISO 294-4 2577

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	58.0 MPa	8410 psi	50%RH; ISO 527-1/-2
	85.0 MPa	12300 psi	DAM; ISO 527-1/-2
Elongation at Break	9.0 %	9.0 %	DAM; ISO 527-1/-2
	14 %	14 %	50%RH; ISO 527-1/-2
Tensile Modulus	2.30 GPa	334 ksi	50%RH; ISO 527-1/-2
	4.20 GPa	609 ksi	DAM; ISO 527-1/-2
Flexural Modulus	2.00 GPa	290 ksi	50%RH; ISO 178
	3.60 GPa	522 ksi	DAM; ISO 178
Izod Impact, Notched (ISO)	13.0 kJ/m²	6.19 ft-lb/in²	DAM; ISO 180/1A
	18.0 kJ/m²	8.57 ft-lb/in²	50%RH; ISO 180/1A
	5.00 kJ/m² @Temperature -30.0 °C	2.38 ft-lb/in² @Temperature -22.0 °F	50%RH; ISO 180/1A
	5.00 kJ/m² @Temperature -40.0 °C	2.38 ft-lb/in² @Temperature -40.0 °F	50%RH; ISO 180/1A
	7.00 kJ/m² @Temperature -40.0 °C	3.33 ft-lb/in² @Temperature -40.0 °F	DAM; ISO 180/1A
	10.0 kJ/m² @Temperature -30.0 °C	4.76 ft-lb/in² @Temperature -22.0 °F	DAM; ISO 180/1A
Izod Impact, Unnotched (ISO)	90.0 kJ/m²	42.8 ft-lb/in²	DAM; ISO 180/1U
	100 kJ/m²	47.6 ft-lb/in²	50%RH; ISO 180/1U
	70.0 kJ/m² @Temperature -30.0 °C	33.3 ft-lb/in² @Temperature -22.0 °F	50%RH; ISO 180/1U
	90.0 kJ/m² @Temperature -30.0 °C	42.8 ft-lb/in² @Temperature -22.0 °F	DAM; ISO 180/1U
Charpy Impact Unnotched	8.00 J/cm²	38.1 ft-lb/in²	DAM; ISO 179/1eU
	10.0 J/cm²	47.6 ft-lb/in²	50%RH; ISO 179/1eU
	7.50 J/cm² @Temperature -30.0 °C	35.7 ft-lb/in² @Temperature -22.0 °F	50%RH; ISO 179/1eU
	8.00 J/cm² @Temperature -30.0 °C	38.1 ft-lb/in² @Temperature -22.0 °F	DAM; ISO 179/1eU
Charpy Impact, Notched	1.20 J/cm²	5.71 ft-lb/in²	DAM; ISO 179/1eA
	1.80 J/cm²	8.57 ft-lb/in²	50%RH; ISO 179/1eA
	0.400 J/cm² @Temperature -40.0 °C	1.90 ft-lb/in² @Temperature -40.0 °F	DAM; ISO 179/1eA
	0.400 J/cm² @Temperature -40.0 °C	1.90 ft-lb/in² @Temperature -40.0 °F	50%RH; ISO 179/1eA
	0.600 J/cm² @Temperature -30.0 °C	2.86 ft-lb/in² @Temperature -22.0 °F	DAM; ISO 179/1eA
	0.600 J/cm² @Temperature -30.0 °C	2.86 ft-lb/in² @Temperature -22.0 °F	50%RH; ISO 179/1eA

Electrical Properties	Metric	English	Comments
Comparative Tracking Index	580 V	580 V	DAM; IEC 60112

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	50.0 µm/m-°C	27.8 µin/in-°F	DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow	118 µm/m-°C	65.6 µin/in-°F	DAM; ISO 11359-1/-2
Melting Point	263 °C	505 °F	DAM; 10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)	246 °C	475 °F	DAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	195 °C	383 °F	DAM; ISO 75-1/-2
Flammability, UL94	HB @Thickness 1.50 mm	HB @Thickness 0.0591 in	DAM; IEC 60695-11-10
	HB @Thickness 0.800 mm	HB @Thickness 0.0315 in	DAM; IEC 60695-11-10
Oxygen Index	21 %	21 %	DAM; ISO 4589-1/-2

Descriptive Properties
Additives	Release agent
Delivery form	Pellets
Part Marking Code	>PA66-IGF14<	ISO 11469
Processing	Injection Moulding
Regional Availability	North America
	South and Central America
Resin Identification	PA66-IGF14
Special characteristics	Heat stabilised or stable to heat
UL recognition	UL	DAM

pa66 样图