PA66 EFE1068 NC010T 具高抗张强度_产品资讯

PA66 EFE1068 NC010T 具有良好的耐磨性、耐热性、耐油性及耐化学药品性，还大大降低了原材料的吸水率和收缩率,具有优良的尺寸稳定性及优异的机械强度。能满足静电消散和静电放电(ESD)防护的要求。这些特殊改性材料经特殊配制，适用于从100到1012欧姆/平方(ohms/sq)的表面电阻范围，可用于注塑及挤出等成型。

Physical Properties	Metric	English	Comments
物性表：
Density	0.950 g/cc	0.0343 lb/in³
	1.14 g/cc	0.0412 lb/in³	DAM; ISO 1183
Water Absorption	8.5 % @Thickness 2.00 mm	8.5 % @Thickness 0.0787 in	DAM; Sim. to ISO 62
Moisture Absorption	2.80 % @Thickness 2.00 mm	2.80 % @Thickness 0.0787 in	DAM; Sim. to ISO 62
Linear Mold Shrinkage, Flow	0.015 cm/cm	0.015 in/in	DAM; ISO 294-4 2577
Linear Mold Shrinkage, Transverse	0.015 cm/cm	0.015 in/in	DAM; ISO 294-4 2577

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	59.0 MPa	8560 psi	50%RH; ISO 527-1/-2
	84.0 MPa	12200 psi	DAM; ISO 527-1/-2
Elongation at Break	18 %	18 %	DAM; Nominal; ISO 527-1/-2
	>= 50 %	>= 50 %	50%RH; Nominal; ISO 527-1/-2
Elongation at Yield	4.5 %	4.5 %	DAM; ISO 527-1/-2
	25 %	25 %	50%RH; ISO 527-1/-2
Tensile Modulus	1.50 GPa	218 ksi	50%RH; ISO 527-1/-2
	3.00 GPa	435 ksi	DAM; ISO 527-1/-2
Izod Impact, Notched (ISO)	5.00 kJ/m²	2.38 ft-lb/in²	DAM; ISO 180/1A
	10.0 kJ/m²	4.76 ft-lb/in²	50%RH; ISO 180/1A
Charpy Impact Unnotched	NB	NB	DAM; ISO 179/1eU
	NB	NB	50%RH; ISO 179/1eU
Charpy Impact, Notched	0.500 J/cm²	2.38 ft-lb/in²	DAM; ISO 179/1eA
	1.20 J/cm²	5.71 ft-lb/in²	50%RH; ISO 179/1eA

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+15 ohm-cm	1.00e+15 ohm-cm	DAM; IEC 60093
Dielectric Strength	27.0 kV/mm	686 kV/in	DAM; IEC 60243-1
Dissipation Factor	0.010 @Frequency 100 Hz	0.010 @Frequency 100 Hz	DAM; IEC 60250
	0.010 @Frequency 1.00e+6 Hz	0.010 @Frequency 1.00e+6 Hz	DAM; IEC 60250
Comparative Tracking Index	600 V	600 V	DAM; IEC 60112

Thermal Properties	Metric	English	Comments
Specific Heat Capacity	2.79 J/g-°C	0.667 BTU/lb-°F
Thermal Conductivity	0.140 W/m-K	0.972 BTU-in/hr-ft²-°F	of melt
Melting Point	263 °C	505 °F	DAM; 10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)	200 °C	392 °F	DAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	70.0 °C	158 °F	DAM; ISO 75-1/-2
Vicat Softening Point	257 °C	495 °F	DAM; 50°C/h 50N; ISO 306
Flammability, UL94	V-2 @Thickness 1.50 mm	V-2 @Thickness 0.0591 in	DAM; IEC 60695-11-10
	V-2 @Thickness 0.700 mm	V-2 @Thickness 0.0276 in	DAM; IEC 60695-11-10
Oxygen Index	24 %	24 %	DAM; ISO 4589-1/-2

Descriptive Properties
Additives	Lubricants
	Release agent
Delivery form	Pellets
Part Marking Code	>PA66<	ISO 11469
Processing	Injection Moulding
Regional Availability	Europe
	Near East/Africa
Resin Identification	PA66

上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。

PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。

欢迎各位客户前来咨询：

联系人：夏先生

手机：13501802636

QQ ：205730283

邮箱：205730283@qq.com

图

尼龙是最重要的工程塑料，产量在五大通用工程塑料中居首位。尼龙,是聚酰胺纤维（锦纶）是一种说法. 可制成长纤或短纤。, 工程塑料:玻璃纤维增强尼龙66(PA66+GF30)