塑胶原料之家
  1. 首页
  2. 资讯
  3. 产品资讯
  4. PA66 RF0057E 加纤防火PA、

PA66 RF0057E 加纤防火PA、

PA66 RF0057E 的收缩率在1%~2%之间，加入玻璃纤维添加剂可以将收缩率降低到0.2%~1% 。PA66 RF0057E 收缩率在流程方向和与流程方向相垂直方向上的相异是较大的。PA66对许多溶剂具有抗溶性，但对酸和其它一些氯化剂的抵抗力较弱。 上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。 PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。 欢迎各位客户前来咨询： 联系人： 夏先生 手 机：1
 PA66 RF0057E PA66在较高温度也能保持较强的强度和刚度。PA66在成型后仍然具有吸湿性，其程度主要取决于材料的组成、壁厚以及环境条件。
 物性表：
Physical Properties Metric English Comments
Density  1.39 g/cc 0.0502 lb/in³ ISO 1183
Water Absorption  0.20 %
@Temperature 23.0 °C,
Time 86400 sec		 0.20 %
@Temperature 73.4 °F,
Time 24.0 hour		 ISO 62-1
Moisture Absorption  2.64 %
@Temperature 23.0 °C		 2.64 %
@Temperature 73.4 °F		 50% RH; ISO 62
Linear Mold Shrinkage, Flow  0.015 - 0.025 cm/cm
@Time 86400 sec		 0.015 - 0.025 in/in
@Time 24.0 hour		 ISO 294
Linear Mold Shrinkage, Transverse  0.010 - 0.012 cm/cm
@Time 86400 sec		 0.010 - 0.012 in/in
@Time 24.0 hour		 ISO 294
 
Mechanical Properties Metric English Comments
Tensile Strength at Break  130 MPa 18900 psi 5 mm/min; ISO 527
Elongation at Break  2.4 % 2.4 % 5 mm/min; ISO 527
Tensile Modulus  9.40 GPa 1360 ksi 1 mm/min; ISO 527
Flexural Strength  190 MPa 27600 psi 2 mm/min; ISO 178
Flexural Modulus  8.00 GPa 1160 ksi 2 mm/min; ISO 178
Izod Impact, Notched (ISO)  7.00 kJ/m² 3.33 ft-lb/in² 80x10x4; ISO 180/1A
Izod Impact, Unnotched (ISO)  45.0 kJ/m² 21.4 ft-lb/in² 80x10x4; ISO 180/1U
 
Electrical Properties Metric English Comments
Volume Resistivity  1.00e+12 ohm-cm 1.00e+12 ohm-cm  
Dielectric Strength  16.0 kV/mm 406 kV/in  
Comparative Tracking Index  600 V 600 V PLC 0; IEC 60112
Hot Wire Ignition, HWI    >= 120 sec
@Thickness 0.400 mm		 >= 120 sec
@Thickness 0.0157 in		 All colors; PLC 0
  >= 120 sec
@Thickness 0.800 mm		 >= 120 sec
@Thickness 0.0315 in		 All colors; PLC 0
  >= 120 sec
@Thickness 1.50 mm		 >= 120 sec
@Thickness 0.0591 in		 All colors; PLC 0
  >= 120 sec
@Thickness 1.60 mm		 >= 120 sec
@Thickness 0.0630 in		 All colors; PLC 0
  >= 120 sec
@Thickness 2.00 mm		 >= 120 sec
@Thickness 0.0787 in		 All colors; PLC 0
  >= 120 sec
@Thickness 3.00 mm		 >= 120 sec
@Thickness 0.118 in		 All colors; PLC 0
  >= 120 sec
@Thickness 0.900 mm		 >= 120 sec
@Thickness 0.0354 in		 BK; PLC 0
  >= 120 sec
@Thickness 1.50 mm		 >= 120 sec
@Thickness 0.0591 in		 NC; PLC 0
High Amp Arc Ignition, HAI   >= 120 arcs
@Thickness 0.900 mm		 >= 120 arcs
@Thickness 0.0354 in		 BK; PLC 0
  >= 120 arcs
@Thickness 0.400 mm		 >= 120 arcs
@Thickness 0.0157 in		 All colors; PLC 0
  >= 120 arcs
@Thickness 0.800 mm		 >= 120 arcs
@Thickness 0.0315 in		 All colors; PLC 0
  >= 120 arcs
@Thickness 1.50 mm		 >= 120 arcs
@Thickness 0.0591 in		 All colors; PLC 0
  >= 120 arcs
@Thickness 1.60 mm		 >= 120 arcs
@Thickness 0.0630 in		 All colors; PLC 0
  >= 120 arcs
@Thickness 2.00 mm		 >= 120 arcs
@Thickness 0.0787 in		 All colors; PLC 0
  >= 120 arcs
@Thickness 3.00 mm		 >= 120 arcs
@Thickness 0.118 in		 All colors; PLC 0
  >= 120 arcs
@Thickness 1.50 mm		 >= 120 arcs
@Thickness 0.0591 in		 NC; PLC 0
 
Thermal Properties Metric English Comments
Hot Ball Pressure Test  240 °C
@Thickness 3.00 mm		 464 °F
@Thickness 0.118 in		 IEC 60695-10-2
Deflection Temperature at 1.8 MPa (264 psi)  240 °C 464 °F Flatw 80x10x4, sp=64 mm; ISO 75/Af
UL RTI, Electrical    65.0 °C
@Thickness 0.400 mm		 149 °F
@Thickness 0.0157 in		 ALL
  140 °C
@Thickness 0.900 mm		 284 °F
@Thickness 0.0354 in		 BK
  140 °C
@Thickness 0.800 mm		 284 °F
@Thickness 0.0315 in		 ALL
  140 °C
@Thickness 1.50 mm		 284 °F
@Thickness 0.0591 in		 ALL
  140 °C
@Thickness 1.60 mm		 284 °F
@Thickness 0.0630 in		 ALL
  140 °C
@Thickness 2.00 mm		 284 °F
@Thickness 0.0787 in		 ALL
  140 °C
@Thickness 3.00 mm		 284 °F
@Thickness 0.118 in		 ALL
  140 °C
@Thickness 1.50 mm		 284 °F
@Thickness 0.0591 in		 NC
UL RTI, Mechanical with Impact    65.0 °C
@Thickness 0.400 mm		 149 °F
@Thickness 0.0157 in		 ALL
  110 °C
@Thickness 0.900 mm		 230 °F
@Thickness 0.0354 in		 BK
  110 °C
@Thickness 0.800 mm		 230 °F
@Thickness 0.0315 in		 ALL
  110 °C
@Thickness 1.50 mm		 230 °F
@Thickness 0.0591 in		 ALL
  110 °C
@Thickness 1.60 mm		 230 °F
@Thickness 0.0630 in		 ALL
  110 °C
@Thickness 2.00 mm		 230 °F
@Thickness 0.0787 in		 ALL
  110 °C
@Thickness 3.00 mm		 230 °F
@Thickness 0.118 in		 ALL
  110 °C
@Thickness 1.50 mm		 230 °F
@Thickness 0.0591 in		 NC
UL RTI, Mechanical without Impact    65.0 °C
@Thickness 0.400 mm		 149 °F
@Thickness 0.0157 in		 ALL
  140 °C
@Thickness 0.900 mm		 284 °F
@Thickness 0.0354 in		 BK
  140 °C
@Thickness 0.800 mm		 284 °F
@Thickness 0.0315 in		 ALL
  140 °C
@Thickness 1.50 mm		 284 °F
@Thickness 0.0591 in		 ALL
  140 °C
@Thickness 1.60 mm		 284 °F
@Thickness 0.0630 in		 ALL
  140 °C
@Thickness 2.00 mm		 284 °F
@Thickness 0.0787 in		 ALL
  140 °C
@Thickness 3.00 mm		 284 °F
@Thickness 0.118 in		 ALL
  140 °C
@Thickness 1.50 mm		 284 °F
@Thickness 0.0591 in		 NC
Flammability, UL94    V-0
@Thickness 0.400 mm		 V-0
@Thickness 0.0157 in		 ALL
  V-0
@Thickness 0.800 mm		 V-0
@Thickness 0.0315 in		 ALL
  V-0
@Thickness 1.50 mm		 V-0
@Thickness 0.0591 in		 ALL
  V-0 - 5VB
@Thickness 3.00 mm		 V-0 - 5VB
@Thickness 0.118 in		 ALL
  V-0 - 5VB
@Thickness 1.50 mm		 V-0 - 5VB
@Thickness 0.0591 in		 NC
  V-0 - 5VA
@Thickness 0.900 mm		 V-0 - 5VA
@Thickness 0.0354 in		 BK
  V-0 - 5VA
@Thickness 1.60 mm		 V-0 - 5VA
@Thickness 0.0630 in		 ALL
  V-0 - 5VA
@Thickness 2.00 mm		 V-0 - 5VA
@Thickness 0.0787 in		 ALL
Glow Wire Test    775 °C
@Thickness 0.900 mm		 1430 °F
@Thickness 0.0354 in		 BK, Glow-Wire Ignition; IEC 60695-2-13
  775 °C
@Thickness 0.400 mm		 1430 °F
@Thickness 0.0157 in		 ALL, Glow-Wire Ignition; IEC 60695-2-13
  775 °C
@Thickness 0.800 mm		 1430 °F
@Thickness 0.0315 in		 ALL, Glow-Wire Ignition; IEC 60695-2-13
  775 °C
@Thickness 1.50 mm		 1430 °F
@Thickness 0.0591 in		 ALL, Glow-Wire Ignition; IEC 60695-2-13
  775 °C
@Thickness 1.60 mm		 1430 °F
@Thickness 0.0630 in		 ALL, Glow-Wire Ignition; IEC 60695-2-13
  775 °C
@Thickness 2.00 mm		 1430 °F
@Thickness 0.0787 in		 ALL, Glow-Wire Ignition; IEC 60695-2-13
  775 °C
@Thickness 1.50 mm		 1430 °F
@Thickness 0.0591 in		 NC, Glow-Wire Ignition; IEC 60695-2-13
  825 °C
@Thickness 3.00 mm		 1520 °F
@Thickness 0.118 in		 ALL, Glow-Wire Ignition; IEC 60695-2-13
  960 °C
@Thickness 0.900 mm		 1760 °F
@Thickness 0.0354 in		 BK, Glow-Wire Flammability; IEC 60695-2-12
  960 °C
@Thickness 0.400 mm		 1760 °F
@Thickness 0.0157 in		 ALL, Glow-Wire Flammability; IEC 60695-2-12
  960 °C
@Thickness 0.800 mm		 1760 °F
@Thickness 0.0315 in		 ALL, Glow-Wire Flammability; IEC 60695-2-12
  960 °C
@Thickness 1.50 mm		 1760 °F
@Thickness 0.0591 in		 ALL, Glow-Wire Flammability; IEC 60695-2-12
  960 °C
@Thickness 1.60 mm		 1760 °F
@Thickness 0.0630 in		 ALL, Glow-Wire Flammability; IEC 60695-2-12
  960 °C
@Thickness 2.00 mm		 1760 °F
@Thickness 0.0787 in		 ALL, Glow-Wire Flammability; IEC 60695-2-12
  960 °C
@Thickness 3.00 mm		 1760 °F
@Thickness 0.118 in		 ALL, Glow-Wire Flammability; IEC 60695-2-12
  960 °C
@Thickness 1.50 mm		 1760 °F
@Thickness 0.0591 in		 NC, Glow-Wire Flammability; IEC 60695-2-12
 
Processing Properties Metric English Comments
Rear Barrel Temperature  265 - 275 °C 509 - 527 °F Zone 1
Middle Barrel Temperature  270 - 280 °C 518 - 536 °F Zone 2
Front Barrel Temperature  270 - 280 °C 518 - 536 °F Zone 3
Melt Temperature  270 - 280 °C 518 - 536 °F  
Mold Temperature  60.0 - 100 °C 140 - 212 °F  
Drying Temperature  80.0 °C 176 °F  
Dry Time  4.00 hour 4.00 hour  
Moisture Content  0.15 - 0.25 % 0.15 - 0.25 %  
 
Descriptive Properties
UL f1 f1
在产品设计时，一定要考虑吸湿性对几何稳定性的影响。为了提高PA66的机械特性，经常加入各种各样的改性剂。玻璃就是最常见的添加剂，有时为了提高抗冲击性还加入合成橡胶，如EPDM和SBR等。PA66的粘性较低，因此流动性很好（但不如PA6）。这个性质可以用来加工很薄的元件。它的粘度对温度变化很敏感。
B颗粒02
 
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生  
手  机：13501802636   
QQ    ：205730283  
邮 箱 ：205730283@qq.com 

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/news/

本文链接: http://www.su-jiao.com/news/show-25688.html

免责声明: 本文 PA66 RF0057E 加纤防火PA、 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他资讯信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4