颗粒图：
、
、物性表：
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.30 g/cc | 1.30 g/cc | |||
| Water Absorption | 0.080 % @Time 86400 sec |
0.080 % @Time 24.0 hour |
|||
| Viscosity | 200 cP @Shear Rate 1000 1/s |
200 cP @Shear Rate 1000 1/s |
CR Viscosity at 6 Min; Capillary Rheometer | ||
| Linear Mold Shrinkage, Flow | 0.010 cm/cm | 0.010 in/in | 410°C nozzle, 220°C mold | ||
| Linear Mold Shrinkage, Transverse | 0.013 cm/cm | 0.013 in/in | 410°C nozzle, 220°C mold | ||
| Crystallinity | 40 % | 40 % | DSC | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Rockwell M | 103 | 103 | ASTM D785 | ||
| Hardness, Shore D | 86 | 86 | |||
| Tensile Strength, Yield | 25.0 MPa @Temperature 250 °C |
3630 psi @Temperature 482 °F |
ASTM D638 | ||
| 35.0 MPa @Temperature 200 °C |
5080 psi @Temperature 392 °F |
ASTM D638 | |||
| 55.0 MPa @Temperature 150 °C |
7980 psi @Temperature 302 °F |
ASTM D638 | |||
| 75.0 MPa @Temperature 100 °C |
10900 psi @Temperature 212 °F |
ASTM D638 | |||
| 100 - 110 MPa @Temperature 23.0 °C |
14500 - 16000 psi @Temperature 73.4 °F |
ASTM D638 | |||
| 140 MPa @Temperature -10.0 °C |
20300 psi @Temperature 14.0 °F |
ASTM D638 | |||
| 160 MPa @Temperature -50.0 °C |
23200 psi @Temperature -58.0 °F |
ASTM D638 | |||
| Elongation at Break | 10 - 15 % | 10 - 15 % | ASTM D638 | ||
| Tensile Modulus | 4.20 GPa | 609 ksi | ASTM D638 | ||
| Flexural Strength | 185 - 190 MPa | 26800 - 27600 psi | ASTM D790 | ||
| Flexural Modulus | 4.10 GPa | 595 ksi | ASTM D790 | ||
| Izod Impact, Notched | 0.550 - 0.600 J/cm | 1.03 - 1.12 ft-lb/in | ASTM D256 | ||
| Izod Impact, Unnotched | NB | NB | ASTM D256 | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+16 ohm-cm | 1.00e+16 ohm-cm | ASTM D257 | ||
| Surface Resistivity per Square | 1.00e+16 ohm | 1.00e+16 ohm | ASTM D257 | ||
| Dielectric Strength | 16.0 kV/mm @Thickness 3.20 mm |
406 kV/in @Thickness 0.126 in |
ASTM D149 | ||
| Arc Resistance | 175 sec | 175 sec | at 500 Volts; ASTM D495 | ||
| Comparative Tracking Index | 145 V | 145 V | per 50 drops; ASTM D3638 | ||
| Thermal Properties | Metric | English | Comments | ||
| Melting Point | 370 - 372 °C | 698 - 702 °F | DSC | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 167 °C | 333 °F | |||
| Glass Transition Temp, Tg | 152 - 154 °C | 306 - 309 °F | DSC/onset | ||
| Flammability, UL94 | V-0 @Thickness 0.800 mm |
V-0 @Thickness 0.0315 in |
|||
| Processing Properties | Metric | English | Comments | ||
| Processing Temperature | 385 - 410 °C | 725 - 770 °F | |||
| Nozzle Temperature | 410 °C | 770 °F | |||
| Mold Temperature | 200 - 220 °C | 392 - 428 °F | |||
| Drying Temperature | 150 °C | 302 °F | |||
| Dry Time | 4 - 6 hour | 4 - 6 hour | |||
| De |
|||||
| Hopper/ Throat Temperature | 60-80°C | ||||
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生
手 机：13501802636
QQ ：205730283
邮 箱 ：205730283@qq.com