塑胶原料之家
  1. 首页
  2. 资讯
  3. 产品资讯
  4. LCP 5145L WT010 塞拉尼斯50%的玻璃纤维

LCP 5145L WT010 塞拉尼斯50%的玻璃纤维

LCP 5145L WT010 类别： 聚合物；热塑性；液晶聚合物（LCP）；液晶聚合物（LCP），50%的玻璃纤维填充 LCP 5145L WT010 材料说明：泽尼特®5145l wt010是45%玻璃纤维增强，具有良好的韧性和290个°C.热变形温度润滑液晶聚合物树脂 联系人： 夏先生 手 机： 13501802636 QQ ：205730283 邮 箱 ：205730283@qq.com
LCP 5145L WT010 类别：
聚合物；热塑性；液晶聚合物（LCP）；液晶聚合物（LCP），50%的玻璃纤维填充
LCP 5145L WT010 材料说明：泽尼特®5145l wt010是45%玻璃纤维增强，具有良好的韧性和290个°C.热变形温度润滑液晶聚合物树脂
LCP 5145L WT010 形式：粒子
LCP 5145L WT010 加工方法：注塑成型
LCP 5145L WT010 的物性表：
 
Physical Properties Metric English Comments
Specific Gravity  1.76 g/cc 1.76 g/cc ASTM D 792
Density  1.77 g/cc 0.0639 lb/in³ ISO 1183
Filler Content  45 % 45 %  
 
Mechanical Properties Metric English Comments
Tensile Strength at Break  115 MPa 16700 psi ISO 527
Tensile Strength, Ultimate  130 MPa
@Temperature 23.0 °C		 18900 psi
@Temperature 73.4 °F		 ASTM D 638
Elongation at Break  3.3 % 3.3 % ISO 527
   3.3 %
@Temperature 23.0 °C		 3.3 %
@Temperature 73.4 °F		 ASTM D 638
Tensile Modulus  13.0 GPa
@Temperature 23.0 °C		 1890 ksi
@Temperature 73.4 °F		 ISO 527
Flexural Strength    160 MPa
@Temperature 23.0 °C		 23200 psi
@Temperature 73.4 °F		 ASTM D 790
  180 MPa
@Temperature 23.0 °C		 26100 psi
@Temperature 73.4 °F		 ISO 178
Flexural Modulus    10.0 GPa
@Temperature 23.0 °C		 1450 ksi
@Temperature 73.4 °F		 ISO 178
  13.0 GPa
@Temperature 23.0 °C		 1890 ksi
@Temperature 73.4 °F		 ASTM D 790
Izod Impact, Notched  2.50 J/cm
@Temperature 23.0 °C		 4.68 ft-lb/in
@Temperature 73.4 °F		 ASTM D 256
Izod Impact, Unnotched  5.00 J/cm
@Temperature 23.0 °C		 9.37 ft-lb/in
@Temperature 73.4 °F		 ASTM D 4812
 
Electrical Properties Metric English Comments
Volume Resistivity  1.00e+15 ohm-cm 1.00e+15 ohm-cm ASTM D 257
Surface Resistance  1.00e+15 ohm 1.00e+15 ohm ASTM D 257
Dielectric Constant    3.4
@Frequency 1000 Hz,
Temperature 23.0 °C		 3.4
@Frequency 1000 Hz,
Temperature 73.4 °F		 ASTM D 150
  3.9
@Frequency 1.00e+6 Hz,
Temperature 23.0 °C		 3.9
@Frequency 1.00e+6 Hz,
Temperature 73.4 °F		 ASTM D 150
  4.4
@Frequency 100000 Hz,
Temperature 23.0 °C		 4.4
@Frequency 100000 Hz,
Temperature 73.4 °F		 ASTM D 150
  4.5
@Frequency 10000 Hz,
Temperature 23.0 °C		 4.5
@Frequency 10000 Hz,
Temperature 73.4 °F		 ASTM D 150
Dielectric Strength  22.0 kV/mm
@Temperature 23.0 °C		 559 kV/in
@Temperature 73.4 °F		 500 V/s, Short Time; ASTM D 149
Dissipation Factor    0.014
@Frequency 10000 Hz		 0.014
@Frequency 10000 Hz		 ASTM D 150
  0.017
@Frequency 1000 Hz		 0.017
@Frequency 1000 Hz		 ASTM D 150
  0.018
@Frequency 100000 Hz		 0.018
@Frequency 100000 Hz		 ASTM D 150
  0.018
@Frequency 1.00e+6 Hz		 0.018
@Frequency 1.00e+6 Hz		 ASTM D 150
Comparative Tracking Index  150 V 150 V IEC 60112
 
Thermal Properties Metric English Comments
CTE, linear    -1.00 µm/m-°C
@Thickness 2.00 mm,
Temperature 160 - 260 °C		 -0.556 µin/in-°F
@Thickness 0.0787 in,
Temperature 320 - 500 °F		 ISO 11359-1/-2
  0.000 µm/m-°C
@Thickness 4.00 mm,
Temperature 160 - 260 °C		 0.000 µin/in-°F
@Thickness 0.157 in,
Temperature 320 - 500 °F		 ISO 11359-1/-2
  4.00 µm/m-°C
@Thickness 2.00 mm,
Temperature -40.0 - 23.0 °C		 2.22 µin/in-°F
@Thickness 0.0787 in,
Temperature -40.0 - 73.4 °F		 ISO 11359-1/-2
  4.00 µm/m-°C
@Thickness 4.00 mm,
Temperature -40.0 - 23.0 °C		 2.22 µin/in-°F
@Thickness 0.157 in,
Temperature -40.0 - 73.4 °F		 ISO 11359-1/-2
  4.00 µm/m-°C
@Thickness 2.00 mm,
Temperature -40.0 - 260 °C		 2.22 µin/in-°F
@Thickness 0.0787 in,
Temperature -40.0 - 500 °F		 ISO 11359-1/-2
  4.00 µm/m-°C
@Thickness 4.00 mm,
Temperature -40.0 - 260 °C		 2.22 µin/in-°F
@Thickness 0.157 in,
Temperature -40.0 - 500 °F		 ISO 11359-1/-2
  4.00 µm/m-°C
@Thickness 2.00 mm,
Temperature 23.0 - 55.0 °C		 2.22 µin/in-°F
@Thickness 0.0787 in,
Temperature 73.4 - 131 °F		 ISO 11359-1/-2
  5.00 µm/m-°C
@Thickness 4.00 mm,
Temperature 23.0 - 55.0 °C		 2.78 µin/in-°F
@Thickness 0.157 in,
Temperature 73.4 - 131 °F		 ISO 11359-1/-2
  6.00 µm/m-°C
@Thickness 2.00 mm,
Temperature 55.0 - 160 °C		 3.33 µin/in-°F
@Thickness 0.0787 in,
Temperature 131 - 320 °F		 ISO 11359-1/-2
  7.00 µm/m-°C
@Thickness 4.00 mm,
Temperature 55.0 - 160 °C		 3.89 µin/in-°F
@Thickness 0.157 in,
Temperature 131 - 320 °F		 ISO 11359-1/-2
CTE, linear, Transverse to Flow    52.0 µm/m-°C
@Temperature -40.0 - 23.0 °C		 28.9 µin/in-°F
@Temperature -40.0 - 73.4 °F		 ISO 11359-1/-2; 2mm
  52.0 µm/m-°C
@Temperature -40.0 - 23.0 °C		 28.9 µin/in-°F
@Temperature -40.0 - 73.4 °F		 ISO 11359-1/-2; 4mm
  77.0 µm/m-°C
@Temperature -40.0 - 260 °C		 42.8 µin/in-°F
@Temperature -40.0 - 500 °F		 ISO 11359-1/-2; 2mm
  80.0 µm/m-°C
@Temperature -40.0 - 260 °C		 44.4 µin/in-°F
@Temperature -40.0 - 500 °F		 ISO 11359-1/-2; 4mm
   60.0 µm/m-°C
@Thickness 2.00 mm,
Temperature 23.0 - 55.0 °C		 33.3 µin/in-°F
@Thickness 0.0787 in,
Temperature 73.4 - 131 °F		 ISO 11359-1/-2
  60.0 µm/m-°C
@Thickness 4.00 mm,
Temperature 23.0 - 55.0 °C		 33.3 µin/in-°F
@Thickness 0.157 in,
Temperature 73.4 - 131 °F		 ISO 11359-1/-2
  80.0 µm/m-°C
@Thickness 2.00 mm,
Temperature 55.0 - 160 °C		 44.4 µin/in-°F
@Thickness 0.0787 in,
Temperature 131 - 320 °F		 ISO 11359-1/-2
  80.0 µm/m-°C
@Thickness 4.00 mm,
Temperature 55.0 - 160 °C		 44.4 µin/in-°F
@Thickness 0.157 in,
Temperature 131 - 320 °F		 ISO 11359-1/-2
  95.0 µm/m-°C
@Thickness 2.00 mm,
Temperature 160 - 260 °C		 52.8 µin/in-°F
@Thickness 0.0787 in,
Temperature 320 - 500 °F		 ISO 11359-1/-2
  100 µm/m-°C
@Thickness 4.00 mm,
Temperature 160 - 260 °C		 55.6 µin/in-°F
@Thickness 0.157 in,
Temperature 320 - 500 °F		 ISO 11359-1/-2
Melting Point  319 °C 606 °F 10°C/min; ISO 11357-1/-3
Deflection Temperature at 1.8 MPa (264 psi)  275 °C 527 °F ASTM D 648
  290 °C 554 °F ISO 75-1/-2 1993/N2
UL RTI, Electrical  130 °C
@Thickness 0.800 mm		 266 °F
@Thickness 0.0315 in		 UL 746B
UL RTI, Mechanical with Impact  130 °C
@Thickness 0.800 mm		 266 °F
@Thickness 0.0315 in		 UL 746B
UL RTI, Mechanical without Impact  130 °C
@Thickness 0.800 mm		 266 °F
@Thickness 0.0315 in		 UL 746B
Flammability, UL94    V-0
@Thickness 1.50 mm		 V-0
@Thickness 0.0591 in		 IEC 60695-11-10
  V-0
@Thickness 0.800 mm		 V-0
@Thickness 0.0315 in		 IEC 60695-11-10
  V-0
@Thickness 0.800 mm		 V-0
@Thickness 0.0315 in		 UL94
  V-0
@Thickness 1.50 mm		 V-0
@Thickness 0.0591 in		 UL94
  V-0
@Thickness 3.00 mm		 V-0
@Thickness 0.118 in		 UL94
  V-0
@Thickness 3.00 mm		 V-0
@Thickness 0.118 in		 IEC 60695-11-10
 
Processing Properties Metric English Comments
Melt Temperature  335 °C 635 °F Optimum
  325 - 345 °C 617 - 653 °F  
Mold Temperature  80.0 °C 176 °F Optimum
  40.0 - 150 °C 104 - 302 °F  
Drying Temperature  150 °C 302 °F  
Dry Time  3 hour 3 hour Dehumidified Dryer
Moisture Content  <= 0.010 % <= 0.010 %  
 
Descriptive Properties
Color White  
Drying Recommended Yes  
Filler Glass Reinforced  
Forms Pellets  
Generic LCP  
Part Marking Code >LCP-GF45< ISO 11469
Polymer Family LCP  
Polymer Type LCP  
Processing Method Injection Molding  
Product Category Electrical Resins  
  Flame Retardant Resins  
  Glass Reinforced Resins  
Region Available Americas  
  Asia/Pacific  
  Europe  
Resin Identification LCP-GF45 ISO 1043
 

如有需求欢迎各位来电咨询：
联系人： 夏先生  
手  机：13501802636  
QQ    ：205730283  
邮 箱 ：205730283@qq.com 
原料图：（兹图非实物图）

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/news/

本文链接: http://www.su-jiao.com/news/show-40594.html

免责声明: 本文 LCP 5145L WT010 塞拉尼斯50%的玻璃纤维 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他资讯信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4