塑胶原料之家
  1. 首页
  2. 资讯
  3. 产品资讯
  4. LCP 7130 BK010 塞拉尼斯 30%玻璃纤维增强

LCP 7130 BK010 塞拉尼斯 30%玻璃纤维增强

LCP 7130 类别：聚合物；热塑性；液晶聚合物（LCP）；液晶聚合物（LCP），30%的玻璃纤维填充 LCP 7130 材料说明：泽尼特7130®BK010是30%玻璃纤维增强，黑色液晶聚合物树脂具有良好的韧性和310个°C.热变形温度 联系人： 夏先生 手 机： 13501802636 QQ ：205730283 邮 箱 ：205730283@qq.com
LCP 7130 类别：聚合物；热塑性；液晶聚合物（LCP）；液晶聚合物（LCP），30%的玻璃纤维填充
LCP 7130 材料说明：泽尼特7130®BK010是30%玻璃纤维增强，黑色液晶聚合物树脂具有良好的韧性和310个°C.热变形温度
LCP 7130 填料/增强材料：矿物填料,30% 填料按重量 
LCP 7130 特性：抗撞击性，良好、润滑 
LCP 7130 的物性表：
 
Physical Properties Metric English Comments
Specific Gravity  1.62 g/cc 1.62 g/cc ASTM D 792
Density  1.62 g/cc 0.0585 lb/in³ ISO 1183
Filler Content  30 % 30 %  
Linear Mold Shrinkage, Flow   -0.00100 cm/cm
@Thickness 15.7 mm		 -0.00100 in/in
@Thickness 0.620 in		 ASTM D955
  0.00 cm/cm
@Thickness 3.17 mm		 0.00 in/in
@Thickness 0.125 in		 ASTM D955
  0.00010 cm/cm
@Thickness 2.00 mm		 0.00010 in/in
@Thickness 0.0787 in		 ISO 294-4
Linear Mold Shrinkage, Transverse   0.0060 cm/cm
@Thickness 2.00 mm		 0.0060 in/in
@Thickness 0.0787 in		 ISO 294-4
  0.0080 cm/cm
@Thickness 3.17 mm		 0.0080 in/in
@Thickness 0.125 in		 ASTM D955
  0.0090 cm/cm
@Thickness 1.60 mm		 0.0090 in/in
@Thickness 0.0630 in		 ASTM D955
 
Mechanical Properties Metric English Comments
Hardness, Rockwell M  63 63 ASTM D 785
Hardness, Rockwell R  110 110 ASTM D 785
Tensile Strength at Break  150 MPa 21800 psi ISO 527
Tensile Strength, Ultimate   30.0 MPa
@Thickness 3.17 mm,
Temperature 250 °C		 4350 psi
@Thickness 0.125 in,
Temperature 482 °F		 ASTM D638
  56.0 MPa
@Thickness 3.17 mm,
Temperature 200 °C		 8120 psi
@Thickness 0.125 in,
Temperature 392 °F		 ASTM D638
  60.0 MPa
@Thickness 3.17 mm,
Temperature 150 °C		 8700 psi
@Thickness 0.125 in,
Temperature 302 °F		 ASTM D638
  75.0 MPa
@Thickness 3.17 mm,
Temperature 120 °C		 10900 psi
@Thickness 0.125 in,
Temperature 248 °F		 ASTM D638
  150 MPa
@Thickness 3.17 mm,
Temperature 23.0 °C		 21800 psi
@Thickness 0.125 in,
Temperature 73.4 °F		 ASTM D638
  230 MPa
@Thickness 3.17 mm,
Temperature -40.0 °C		 33400 psi
@Thickness 0.125 in,
Temperature -40.0 °F		 ASTM D638
Elongation at Break  1.5 % 1.5 % ISO 527
  1.7 %
@Temperature 23.0 °C		 1.7 %
@Temperature 73.4 °F		 ASTM D 638
Tensile Modulus  17.0 GPa 2470 ksi ISO 527
  9.00 GPa
@Thickness 3.17 mm,
Temperature 150 °C		 1310 ksi
@Thickness 0.125 in,
Temperature 302 °F		 ASTM D638
  9.00 GPa
@Thickness 3.17 mm,
Temperature 200 °C		 1310 ksi
@Thickness 0.125 in,
Temperature 392 °F		 ASTM D638
  9.00 GPa
@Thickness 3.17 mm,
Temperature 250 °C		 1310 ksi
@Thickness 0.125 in,
Temperature 482 °F		 ASTM D638
  14.0 GPa
@Thickness 3.17 mm,
Temperature 120 °C		 2030 ksi
@Thickness 0.125 in,
Temperature 248 °F		 ASTM D638
  18.0 GPa
@Thickness 3.17 mm,
Temperature 23.0 °C		 2610 ksi
@Thickness 0.125 in,
Temperature 73.4 °F		 ASTM D638
  23.0 GPa
@Thickness 3.17 mm,
Temperature -40.0 °C		 3340 ksi
@Thickness 0.125 in,
Temperature -40.0 °F		 ASTM D638
Flexural Strength  210 MPa
@Temperature 23.0 °C		 30500 psi
@Temperature 73.4 °F		 ISO 178
  29.0 MPa
@Thickness 1.60 mm,
Temperature 250 °C		 4210 psi
@Thickness 0.0630 in,
Temperature 482 °F		 ASTM D790
  30.0 MPa
@Thickness 0.800 mm,
Temperature 250 °C		 4350 psi
@Thickness 0.0315 in,
Temperature 482 °F		 ASTM D790
  30.0 MPa
@Thickness 3.17 mm,
Temperature 250 °C		 4350 psi
@Thickness 0.125 in,
Temperature 482 °F		 ASTM D790
  48.0 MPa
@Thickness 3.17 mm,
Temperature 200 °C		 6960 psi
@Thickness 0.125 in,
Temperature 392 °F		 ASTM D790
  49.0 MPa
@Thickness 1.60 mm,
Temperature 200 °C		 7110 psi
@Thickness 0.0630 in,
Temperature 392 °F		 ASTM D790
  53.0 MPa
@Thickness 0.800 mm,
Temperature 200 °C		 7690 psi
@Thickness 0.0315 in,
Temperature 392 °F		 ASTM D790
       
Flexural Modulus  13.0 GPa
@Temperature 23.0 °C		 1890 ksi
@Temperature 73.4 °F		 ISO 178
  3.50 GPa
@Thickness 3.17 mm,
Temperature 250 °C		 508 ksi
@Thickness 0.125 in,
Temperature 482 °F		 ASTM D790
  4.00 GPa
@Thickness 1.60 mm,
Temperature 250 °C		 580 ksi
@Thickness 0.0630 in,
Temperature 482 °F		 ASTM D790
  5.00 GPa
@Thickness 0.800 mm,
Temperature 250 °C		 725 ksi
@Thickness 0.0315 in,
Temperature 482 °F		 ASTM D790
  6.00 GPa
@Thickness 1.60 mm,
Temperature 200 °C		 870 ksi
@Thickness 0.0630 in,
Temperature 392 °F		 ASTM D790
  6.50 GPa
@Thickness 3.17 mm,
Temperature 200 °C		 943 ksi
@Thickness 0.125 in,
Temperature 392 °F		 ASTM D790
  8.00 GPa
@Thickness 3.17 mm,
Temperature 120 °C		 1160 ksi
@Thickness 0.125 in,
Temperature 248 °F		 ASTM D790
  8.00 GPa
@Thickness 3.17 mm,
Temperature 150 °C		 1160 ksi
@Thickness 0.125 in,
Temperature 302 °F		 ASTM D790
  8.00 GPa
@Thickness 1.60 mm,
Temperature 150 °C		 1160 ksi
@Thickness 0.0630 in,
Temperature 302 °F		 ASTM D790
  8.00 GPa
@Thickness 0.800 mm,
Temperature 200 °C		 1160 ksi
@Thickness 0.0315 in,
Temperature 392 °F		 ASTM D790
       
Compressive Strength  89.0 MPa 12900 psi ASTM D 695
Shear Strength   57.0 MPa
@Thickness 0.800 mm		 8270 psi
@Thickness 0.0315 in		 ASTM D732
  58.0 MPa
@Thickness 3.17 mm		 8410 psi
@Thickness 0.125 in		 ASTM D732
Izod Impact, Notched   1.70 J/cm
@Thickness 1.60 mm,
Temperature 23.0 °C		 3.18 ft-lb/in
@Thickness 0.0630 in,
Temperature 73.4 °F		 ASTM D256
  1.85 J/cm
@Thickness 3.17 mm,
Temperature -40.0 °C		 3.47 ft-lb/in
@Thickness 0.125 in,
Temperature -40.0 °F		 ASTM D256
       
Izod Impact, Notched (ISO)  18.0 kJ/m²
@Temperature 23.0 °C		 8.57 ft-lb/in²
@Temperature 73.4 °F		 ISO 180/1A
Izod Impact, Unnotched (ISO)  30.0 kJ/m²
@Temperature 23.0 °C		 14.3 ft-lb/in²
@Temperature 73.4 °F		 ISO 180/1U
Charpy Impact Unnotched   2.20 J/cm²
@Temperature -30.0 °C		 10.5 ft-lb/in²
@Temperature -22.0 °F		 ISO 179/1eU
  3.00 J/cm²
@Temperature 23.0 °C		 14.3 ft-lb/in²
@Temperature 73.4 °F		 ISO 179/1eU
Charpy Impact, Notched   2.00 J/cm²
@Temperature -30.0 °C		 9.52 ft-lb/in²
@Temperature -22.0 °F		 ISO 179/1eA
  2.00 J/cm²
@Temperature 23.0 °C		 9.52 ft-lb/in²
@Temperature 73.4 °F		 ISO 179/1eA
 
Electrical Properties Metric English Comments
Volume Resistivity  >= 1.00e+15 ohm-cm >= 1.00e+15 ohm-cm IEC 60093
  1.00e+16 ohm-cm 1.00e+16 ohm-cm IEC 60093
  1.00e+16 ohm-cm 1.00e+16 ohm-cm ASTM D 257
Surface Resistance  >= 1.00e+15 ohm >= 1.00e+15 ohm IEC 60093
  1.00e+15 ohm 1.00e+15 ohm ASTM D 257
  1.00e+16 ohm 1.00e+16 ohm IEC 60093
Dielectric Constant   3.7
@Frequency 1.00e+6 Hz		 3.7
@Frequency 1.00e+6 Hz		 IEC 60250
  4.1
@Frequency 100 Hz		 4.1
@Frequency 100 Hz		 IEC 60250
       
  5.0
@Frequency 1000 Hz,
Temperature 150 °C		 5.0
@Frequency 1000 Hz,
Temperature 302 °F		 3.2mm (0.125in); ASTM D 150
Dielectric Strength   27.0 kV/mm
@Thickness 2.00 mm		 686 kV/in
@Thickness 0.0787 in		 IEC 60243-1
  45.0 kV/mm
@Thickness 1.00 mm		 1140 kV/in
@Thickness 0.0394 in		 IEC 60243-1
  >= 26.0 kV/mm
@Thickness 3.20 mm,
Temperature 150 °C		 >= 660 kV/in
@Thickness 0.126 in,
Temperature 302 °F		 Short time; ASTM D149
  >= 27.0 kV/mm
@Thickness 3.20 mm,
Temperature 200 °C		 >= 686 kV/in
@Thickness 0.126 in,
Temperature 392 °F		 Short time; ASTM D149
  >= 28.0 kV/mm
@Thickness 3.20 mm,
Temperature 120 °C		 >= 711 kV/in
@Thickness 0.126 in,
Temperature 248 °F		 Short time; ASTM D149
       
Dissipation Factor   0.0040
@Frequency 1.00e+9 Hz,
Temperature 23.0 °C		 0.0040
@Frequency 1.00e+9 Hz,
Temperature 73.4 °F		 0.8mm (0.031in); ASTM D 2520 B
  0.0040
@Frequency 1.00e+9 Hz,
Temperature 23.0 °C		 0.0040
@Frequency 1.00e+9 Hz,
Temperature 73.4 °F		 1.6mm (0.062in); ASTM D 2520 B
  0.0040
@Frequency 1.00e+9 Hz,
Temperature 23.0 °C		 0.0040
@Frequency 1.00e+9 Hz,
Temperature 73.4 °F		 3.2mm (0.125in); ASTM D 2520 B
       
Comparative Tracking Index  100 - 174 V 100 - 174 V UL 746A
  175 V 175 V IEC 60112
 
Thermal Properties Metric English Comments
CTE, linear   -1.00 µm/m-°C
@Thickness 2.00 mm,
Temperature 160 - 260 °C		 -0.556 µin/in-°F
@Thickness 0.0787 in,
Temperature 320 - 500 °F		 ISO 11359-1/-2
  0.000 µm/m-°C
@Thickness 4.00 mm,
Temperature 160 - 260 °C		 0.000 µin/in-°F
@Thickness 0.157 in,
Temperature 320 - 500 °F		 ISO 11359-1/-2
       
  14.0 µm/m-°C
@Thickness 3.17 mm,
Temperature 23.0 - 150 °C		 7.78 µin/in-°F
@Thickness 0.125 in,
Temperature 73.4 - 302 °F		 ASTM E 228
CTE, linear, Transverse to Flow   54.0 µm/m-°C
@Temperature -40.0 - 23.0 °C		 30.0 µin/in-°F
@Temperature -40.0 - 73.4 °F		 ISO 11359-1/-2; 4mm
  58.0 µm/m-°C
@Temperature -40.0 - 23.0 °C		 32.2 µin/in-°F
@Temperature -40.0 - 73.4 °F		 ISO 11359-1/-2; 2mm
  79.0 µm/m-°C
@Temperature -40.0 - 260 °C		 43.9 µin/in-°F
@Temperature -40.0 - 500 °F		 ISO 11359-1/-2; 4mm
  82.0 µm/m-°C
@Temperature -40.0 - 260 °C		 45.6 µin/in-°F
@Temperature -40.0 - 500 °F		 ISO 11359-1/-2; 2mm
       
Melting Point  352 °C 666 °F ASTM D 3418
  352 °C 666 °F 10°C/min; ISO 11357-1/-3
Deflection Temperature at 1.8 MPa (264 psi)  289 °C 552 °F ASTM D 648
  310 °C 590 °F ISO 75-1/-2 1993/N2
Glass Transition Temp, Tg  120 °C 248 °F ASTM D 3418
  120 °C 248 °F 10°C/min; ISO 11357-1/-2
UL RTI, Electrical   240 °C
@Thickness 1.50 mm		 464 °F
@Thickness 0.0591 in		 UL 746B
  240 °C
@Thickness 0.750 mm		 464 °F
@Thickness 0.0295 in		 UL 746B
  240 °C
@Thickness 3.00 mm		 464 °F
@Thickness 0.118 in		 UL 746B
UL RTI, Mechanical with Impact   210 °C
@Thickness 1.50 mm		 410 °F
@Thickness 0.0591 in		 UL 746B
  210 °C
@Thickness 0.750 mm		 410 °F
@Thickness 0.0295 in		 UL 746B
  210 °C
@Thickness 3.00 mm		 410 °F
@Thickness 0.118 in		 UL 746B
UL RTI, Mechanical without Impact   240 °C
@Thickness 1.50 mm		 464 °F
@Thickness 0.0591 in		 UL 746B
  240 °C
@Thickness 0.750 mm		 464 °F
@Thickness 0.0295 in		 UL 746B
  240 °C
@Thickness 3.00 mm		 464 °F
@Thickness 0.118 in		 UL 746B
Flammability, UL94  V-0
@Thickness 0.750 mm		 V-0
@Thickness 0.0295 in		 IEC 60695-11-10
  V-0
@Thickness 1.50 mm		 V-0
@Thickness 0.0591 in		 IEC 60695-11-10
  V-0
@Thickness 1.50 mm		 V-0
@Thickness 0.0591 in		 UL94
  V-0
@Thickness 0.750 mm		 V-0
@Thickness 0.0295 in		 UL94
  V-0
@Thickness 0.400 mm		 V-0
@Thickness 0.0157 in		 IEC 60695-11-10
  V-0
@Thickness 0.400 mm		 V-0
@Thickness 0.0157 in		 UL94
  V-0
@Thickness 3.00 mm		 V-0
@Thickness 0.118 in		 IEC 60695-11-10
  V-0
@Thickness 3.00 mm		 V-0
@Thickness 0.118 in		 UL94
Oxygen Index  45 % 45 % ISO 4589-1/-2
  39 %
@Thickness 3.17 mm		 39 %
@Thickness 0.125 in		 ASTM D2863
Glow Wire Test   800 °C
@Thickness 0.700 mm		 1470 °F
@Thickness 0.0276 in		 Glow Wire Ignition Temperature; IEC 60695-2-13
  825 °C
@Thickness 1.00 mm		 1520 °F
@Thickness 0.0394 in		 Glow Wire Ignition Temperature; IEC 60695-2-13
  850 °C
@Thickness 2.00 mm		 1560 °F
@Thickness 0.0787 in		 Glow Wire Ignition Temperature; IEC 60695-2-13
  900 °C
@Thickness 3.00 mm		 1650 °F
@Thickness 0.118 in		 Glow Wire Ignition Temperature; IEC 60695-2-13
  960 °C
@Thickness 0.700 mm		 1760 °F
@Thickness 0.0276 in		 Glow Wire Flammability Index; IEC 60695-2-12
  960 °C
@Thickness 1.00 mm		 1760 °F
@Thickness 0.0394 in		 Glow Wire Flammability Index; IEC 60695-2-12
  960 °C
@Thickness 2.00 mm		 1760 °F
@Thickness 0.0787 in		 Glow Wire Flammability Index; IEC 60695-2-12
  960 °C
@Thickness 3.00 mm		 1760 °F
@Thickness 0.118 in		 Glow Wire Flammability Index; IEC 60695-2-12
 
Processing Properties Metric English Comments
Melt Temperature  365 °C 689 °F Optimum
  360 - 370 °C 680 - 698 °F  
Mold Temperature  80.0 °C 176 °F Optimum
  40.0 - 150 °C 104 - 302 °F  
Drying Temperature  150 °C 302 °F  
Dry Time  3 hour 3 hour Dehumidified Dryer
Moisture Content  <= 0.010 % <= 0.010 %  
 
Descriptive Properties
Color Black  
Drying Recommended Yes  
Features Appearance, Pleasing Surface  
  Arc Resistant  
  Aromatic  
  Chemical Resistance, Good  
  Dimensional Stability, Good  
  Flow, Good  
  Heat Aging Resistance, Good  
  Moisture Absorption, Low  
  Platable  
Filler Glass fiber reinforcement  
Flame Retardant - Halogen/Red Phosphorus Free Yes  
Forms Pellets  
Generic LCP  
Part Marking Code >LCP-GF30< ISO 11469
Polymer Family LCP  
Polymer Type LCP  
Processing Injection Moldable  
Processing Method Injection Molding  
Product Category Electrical Resins  
  Flame Retardant Resins  
  Glass Reinforced Resins  
Region Available Americas  
  Asia/Pacific  
  Europe  
Resin Identification LCP-GF30 ISO 1043
Uses Automotive Applications  
  Automotive Electronics  
  Automotive, Under the Hood  
  Communication Applications  
  Computer Components  
  Connectors  
  Electrical/Electronic Applications  
  Parts, Engineering  
  Parts, Thin-walled  
  Printer Parts

如有需求欢迎各位来电咨询：
联系人： 夏先生  
手  机：13501802636  
QQ    ：205730283  
邮 箱 ：205730283@qq.com 

原料图：（兹图非实物图）

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/news/

本文链接: http://www.su-jiao.com/news/show-40623.html

免责声明: 本文 LCP 7130 BK010 塞拉尼斯 30%玻璃纤维增强 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他资讯信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4