塑胶原料之家
  1. 首页
  2. 资讯
  3. 产品资讯
  4. 塞拉尼斯 6330 BK010 LCP 具有良好的韧性

塞拉尼斯 6330 BK010 LCP 具有良好的韧性

6330 材料说明：泽尼特6330®BK010是30%的矿物增强，黑色液晶聚合物树脂具有良好的韧性和245个°C.热变形温度、泽尼特6330注塑30%的矿物增强液晶聚合物。它具有优异的耐冲击性、优异的热变形温度，适合各种要求的应用。 联系人： 夏先生 手 机： 13501802636 QQ ：205730283 邮 箱 ：205730283@qq.com
6330 形式：粒子 
6330 加工方法：注塑成型 
6330 材料说明：泽尼特6330®BK010是30%的矿物增强，黑色液晶聚合物树脂具有良好的韧性和245个°C.热变形温度、泽尼特6330注塑30%的矿物增强液晶聚合物。它具有优异的耐冲击性、优异的热变形温度，适合各种要求的应用。

如有需求欢迎各位来电咨询：
联系人： 夏先生  
手  机：13501802636  
QQ    ：205730283  
邮 箱 ：205730283@qq.com 

6330 的物性表：
 
Physical Properties Metric English Comments
Specific Gravity  1.64 g/cc 1.64 g/cc ASTM D 792
Density  1.64 g/cc 0.0592 lb/in³ ISO 1183
Filler Content  30 % 30 %  
Linear Mold Shrinkage, Flow   0.00 cm/cm
@Thickness 3.17 mm		 0.00 in/in
@Thickness 0.125 in		 ASTM D955
  0.00 cm/cm
@Thickness 2.00 mm		 0.00 in/in
@Thickness 0.0787 in		 ISO 294-4
Linear Mold Shrinkage, Transverse   0.0040 cm/cm
@Thickness 2.00 mm		 0.0040 in/in
@Thickness 0.0787 in		 ISO 294-4
  0.0050 cm/cm
@Thickness 3.17 mm		 0.0050 in/in
@Thickness 0.125 in		 ASTM D955
 
Mechanical Properties Metric English Comments
Tensile Strength at Break  125 MPa 18100 psi ISO 527
Tensile Strength, Ultimate   17.0 MPa
@Thickness 1.60 mm,
Temperature 250 °C		 2470 psi
@Thickness 0.0630 in,
Temperature 482 °F		 ASTM D638
  26.0 MPa
@Thickness 1.60 mm,
Temperature 200 °C		 3770 psi
@Thickness 0.0630 in,
Temperature 392 °F		 ASTM D638
       
 
Electrical Properties Metric English Comments
Volume Resistivity  >= 1.00e+15 ohm-cm >= 1.00e+15 ohm-cm IEC 60093
  1.00e+16 ohm-cm 1.00e+16 ohm-cm IEC 60093
  >= 1.00e+16 ohm-cm >= 1.00e+16 ohm-cm ASTM D 257
Surface Resistance  >= 1.00e+15 ohm >= 1.00e+15 ohm IEC 60093
  1.00e+16 ohm 1.00e+16 ohm IEC 60093
  >= 1.00e+16 ohm >= 1.00e+16 ohm ASTM D 257
Dielectric Constant  3.8
@Frequency 100 Hz		 3.8
@Frequency 100 Hz		 IEC 60250
  2.9
@Frequency 1.00e+6 Hz,
Temperature 23.0 °C		 2.9
@Frequency 1.00e+6 Hz,
Temperature 73.4 °F		 0.8mm (0.031in); ASTM D 150
  3.2
@Frequency 1.00e+6 Hz,
Temperature 23.0 °C		 3.2
@Frequency 1.00e+6 Hz,
Temperature 73.4 °F		 3.2mm (0.125in); ASTM D 150
       
Dielectric Strength   26.0 kV/mm
@Thickness 2.00 mm		 660 kV/in
@Thickness 0.0787 in		 IEC 60243-1
  35.0 kV/mm
@Thickness 1.00 mm		 889 kV/in
@Thickness 0.0394 in		 IEC 60243-1
  26.0 kV/mm
@Thickness 3.20 mm,
Temperature 23.0 °C		 660 kV/in
@Thickness 0.126 in,
Temperature 73.4 °F		 Short time; ASTM D149
       
Dissipation Factor   0.0010
@Frequency 1.00e+10 Hz,
Temperature 23.0 °C		 0.0010
@Frequency 1.00e+10 Hz,
Temperature 73.4 °F		 1.6mm (0.062in); ASTM D 2520 B
  0.0010
@Frequency 1.00e+10 Hz,
Temperature 23.0 °C		 0.0010
@Frequency 1.00e+10 Hz,
Temperature 73.4 °F		 0.8mm (0.031in); ASTM D 2520 B
       
Comparative Tracking Index  200 V 200 V IEC 60112
  175 - 249 V 175 - 249 V UL 746A
 
Thermal Properties Metric English Comments
CTE, linear  8.00 µm/m-°C
@Temperature 23.0 - 150 °C		 4.44 µin/in-°F
@Temperature 73.4 - 302 °F		 ASTM E 228
  -4.00 µm/m-°C
@Thickness 2.00 mm,
Temperature 160 - 260 °C		 -2.22 µin/in-°F
@Thickness 0.0787 in,
Temperature 320 - 500 °F		 ISO 11359-1/-2
       
Melting Point  335 °C 635 °F 10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)  275 °C 527 °F ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)  239 °C 462 °F ASTM D 648
  245 °C 473 °F ISO 75-1/-2
Glass Transition Temp, Tg  120 °C 248 °F 10°C/min; ISO 11357-1/-2
  120 °C 248 °F ASTM D 3418
UL RTI, Electrical   240 °C
@Thickness 1.50 mm		 464 °F
@Thickness 0.0591 in		 UL 746B
  240 °C
@Thickness 3.00 mm		 464 °F
@Thickness 0.118 in		 UL 746B
UL RTI, Mechanical with Impact   220 °C
@Thickness 1.50 mm		 428 °F
@Thickness 0.0591 in		 UL 746B
  220 °C
@Thickness 3.00 mm		 428 °F
@Thickness 0.118 in		 UL 746B
UL RTI, Mechanical without Impact   240 °C
@Thickness 1.50 mm		 464 °F
@Thickness 0.0591 in		 UL 746B
  240 °C
@Thickness 3.00 mm		 464 °F
@Thickness 0.118 in		 UL 746B
Flammability, UL94   V-0
@Thickness 1.50 mm		 V-0
@Thickness 0.0591 in		 IEC 60695-11-10
  V-0
@Thickness 1.50 mm		 V-0
@Thickness 0.0591 in		 UL94
  V-0
@Thickness 3.00 mm		 V-0
@Thickness 0.118 in		 UL94
  V-0
@Thickness 3.00 mm		 V-0
@Thickness 0.118 in		 IEC 60695-11-10
Oxygen Index  47 % 47 % ISO 4589-1/-2
Glow Wire Test   850 °C
@Thickness 2.00 mm		 1560 °F
@Thickness 0.0787 in		 Glow Wire Ignition Temperature; IEC 60695-2-13
  875 °C
@Thickness 3.00 mm		 1610 °F
@Thickness 0.118 in		 Glow Wire Ignition Temperature; IEC 60695-2-13
  960 °C
@Thickness 2.00 mm		 1760 °F
@Thickness 0.0787 in		 Glow Wire Flammability Index; IEC 60695-2-12
  960 °C
@Thickness 3.00 mm		 1760 °F
@Thickness 0.118 in		 Glow Wire Flammability Index; IEC 60695-2-12
 
Processing Properties Metric English Comments
Melt Temperature  355 °C 671 °F Optimum
  350 - 360 °C 662 - 680 °F  
Mold Temperature  80.0 °C 176 °F Optimum
  40.0 - 150 °C 104 - 302 °F  
Drying Temperature  150 °C 302 °F  
Dry Time  3 hour 3 hour Dehumidified Dryer
Moisture Content  <= 0.010 % <= 0.010 %  
 
Descriptive Properties
Color Black  
Drying Recommended Yes  
Features Appearance, Pleasing Surface  
  Arc Resistant  
  Aromatic  
  Chemical Resistance, Good  
  Dimensional Stability, Good  
  Flow, Good  
  Heat Aging Resistance, Good  
  Moisture Absorption, Low  
  Platable  
  Warpage, Low  
Filler Mineral filler  
Flame Retardant - Halogen/Red Phosphorus Free Yes  
Forms Pellets  
Generic LCP  
Mineral Filler Yes  
Part Marking Code >LCP-MD30< ISO 11469
Polymer Family LCP  
Polymer Type LCP  
Processing Injection Moldable  
Processing Method Injection Molding  
Product Category Electrical Resins  
  Flame Retardant Resins  
  Low Warp Resins  
  Mineral Reinforced Resins  
Region Available Americas  
  Asia/Pacific  
  Europe  
Resin Identification LCP-MD30 ISO 1043
Uses Automotive Applications  
  Automotive Electronics  
  Automotive, Under the Hood  
  Communication Applications  
  Computer Components  
  Connectors  
  Electrical/Electronic Applications  
  Parts, Engineering  
  Parts, Thin-walled  
  Printer Parts
 
原料图：（兹图非实物图）
颗粒02

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/news/

本文链接: http://www.su-jiao.com/news/show-40684.html

免责声明: 本文 塞拉尼斯 6330 BK010 LCP 具有良好的韧性 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他资讯信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4