- 弯曲强度 [MPa]: 6.07
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.24 g/cc | 1.24 g/cc | silicone property; Arlon SQA-TMS-024 | ||
| Thickness | 19.0 microns | 0.750 mil | side 1, layer 1 cured silicone; Arlon SQA-TMS-003 | ||
| 19.0 microns | 0.750 mil | side 2 silicone; Arlon SQA-TMS-003 | |||
| 152 microns | 6.00 mil | side 1, layer 2 uncured silicone; Arlon SQA-TMS-003 | |||
| 203 microns | 8.00 mil | substrate; Arlon SQA-TMS-003 | |||
| 394 microns | 15.5 mil | overall; Arlon SQA-TMS-003 | |||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore A | 50 | 50 | silicone property; ASTM D2240 | ||
| Tensile Strength, Ultimate | 6.07 MPa | 880 psi | silicone property; ASTM D412 | ||
| Elongation at Break | 470 % | 470 % | silicone property; ASTM D412 | ||
| Adhesive Bond Strength | 0.0552 MPa | 8.00 psi | ASTM D624 | ||
| Electrical Properties | Metric | English | Comments | ||
| Dielectric Strength | 23.6 kV/mm | 600 kV/in | ASTM D149 | ||
| Thermal Properties | Metric | English | Comments | ||
| Thermal Conductivity | 0.290 W/m-K | 2.01 BTU-in/hr-ft²-°F | ASTM E 1530 | ||
| Maximum Service Temperature, Air | 232 °C | 450 °F | |||
| Minimum Service Temperature, Air | -56.7 °C | -70.0 °F | |||
| Processing Properties | Metric | English | Comments | ||
| Cure Time | 15.0 min @Pressure 0.345 MPa, Temperature 177 °C | 0.250 hour @Pressure 50.0 psi, Temperature 350 °F | |||
| Shelf Life | 6.00 Month @Temperature 23.9 °C | 6.00 Month @Temperature 75.0 °F | |||
| Descriptive Properties | |||||
| Color | Red | ||||