- 密度 [g/cm3]: 2.21
- 缺口冲击强度: 15.6
- 拉伸强度 [MPa]: 12.0
- 热变形温度 [℃]: 135.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 2.21 g/cc | 0.0798 lb/in³ | ASTM D792 | ||
| Moisture Absorption at Equilibrium | 0.00 % @Temperature 23.0 °C | 0.00 % @Temperature 73.4 °F | 50% RH; ASTM D570 | ||
| Water Absorption at Saturation | 0.00 % | 0.00 % | ASTM D570 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore D | 51 | 51 | ASTM D 2240 | ||
| Tensile Strength at Break | 28.0 - 35.0 MPa | 4060 - 5080 psi | ASTM D638 | ||
| Tensile Strength, Yield | 12.0 - 15.0 MPa | 1740 - 2180 psi | ASTM D638 | ||
| Elongation at Break | 210 - 500 % | 210 - 500 % | ASTM D638 | ||
| Elongation at Yield | 25 % | 25 % | ASTM D638 | ||
| Tensile Modulus | 0.450 - 0.750 GPa | 65.3 - 109 ksi | ASTM D638 | ||
| Compressive Yield Strength | 4.40 MPa @Strain 1.00 %, Time 3.60e+6 sec | 638 psi @Strain 1.00 %, Time 1000 hour | ASTM D695 | ||
| Compressive Modulus | 0.420 GPa | 60.9 ksi | ASTM D695 | ||
| Poissons Ratio | 0.40 | 0.40 | |||
| Izod Impact, Notched (ISO) | 15.6 kJ/m² | 7.42 ft-lb/in² | ASTM D256 | ||
| Izod Impact, Unnotched (ISO) | NB | NB | ASTM D256 | ||
| Coefficient of Friction, Dynamic | 0.12 | 0.12 | on polished steel; MPC Test | ||
| Coefficient of Friction, Static | 0.16 | 0.16 | on polished steel; MPC Test | ||
| K Factor (Wear Factor) | 65 | 65 | µm/s. PV = 0.1 MPa-m/s; max P = 4.4 MPa; MPC Test | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+20 ohm-cm | 1.00e+20 ohm-cm | ASTM D257 | ||
| Surface Resistance | 1.00e+17 ohm | 1.00e+17 ohm | ASTM D257 | ||
| Dielectric Constant | 2.1 @Frequency 1.00e+6 Hz | 2.1 @Frequency 1.00e+6 Hz | ASTM D150 | ||
| Dielectric Strength | 25.0 kV/mm @Thickness 2.00 mm | 635 kV/in @Thickness 0.0787 in | ASTM D149 | ||
| Dielectric Loss Index | 0.000070 @Frequency 1.00e+6 Hz | 0.000070 @Frequency 1.00e+6 Hz | ASTM D150 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 160 µm/m-°C @Temperature 23.0 - 100 °C | 88.9 µin/in-°F @Temperature 73.4 - 212 °F | |||
| CTE, linear, Transverse to Flow | 120 µm/m-°C @Temperature 23.0 °C | 66.7 µin/in-°F @Temperature 73.4 °F | |||
| Maximum Service Temperature, Air | 260 °C | 500 °F | |||
| Deflection Temperature at 0.46 MPa (66 psi) | 135 °C | 275 °F | ASTM D648-45 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 55.0 °C | 131 °F | ASTM D648-45 | ||
| Minimum Service Temperature, Air | -240 °C | -400 °F | |||
| Flammability, UL94 | V-0 | V-0 | |||
| Compliance Properties | Metric | English | Comments | ||
| FDA | Yes | Yes | |||
| Descriptive Properties | |||||
| Color | White | ||||
| UV Resistance | Y | ||||