特点：
1、综合性能较好，冲击强度较高，化学稳定性，电性能良好.
2、与372有机玻璃的熔接性良好，制成双色塑件，且可表面镀铬，喷漆处理.
3、有高抗冲、高耐热、阻燃、增强、透明等级别。
4、流动性比HIPS差一点，比PMMA、PC等好，柔韧性好。
5、用途：适于制作一般机械零件，减磨耐磨零件，传动零件和电讯零件.
6、同PVC（聚氯乙烯）一样在屈折处会出现白化现象。
典型应用范围:
汽车内外饰：仪表板，饰柱，仪表前盖，格栅，内外饰件 2.商务设备机壳和内置部件：笔记本/台式电脑，复印机，打印机，绘图仪，显示器 3.电信，移动电话外壳，附件以及智能卡（SIM卡）： 4.电器产品，电子产品外壳，电表罩和壳体，家用开关，插头和插座，电缆电线管道 5.家用电器，如洗衣机，吹风机，微波炉内外部件等。
| 物性表： | |||||
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.14 g/cc | 1.14 g/cc | ASTM D792 | ||
| Density | 1.10 g/cc | 0.0397 lb/in³ | ISO 1183 | ||
| Linear Mold Shrinkage, Flow | 0.0050 - 0.0070 cm/cm | 0.0050 - 0.0070 in/in | on Tensile Bar; SABIC Method | ||
| Melt Index of Compound | 26 g/10 min @Load 5.00 kg, Temperature 260 °C |
26 g/10 min @Load 11.0 lb, Temperature 500 °F |
MVR [cm^3/10 min]; ISO 1133 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength at Break | 40.0 MPa | 5800 psi | 5 mm/min; ISO 527 | ||
| 40.0 MPa | 5800 psi | 50 mm/min; ISO 527 | |||
| 43.0 MPa | 6240 psi | Type I, 50 mm/min; ASTM D638 | |||
| Tensile Strength, Yield | 45.0 MPa | 6530 psi | 5 mm/min; ISO 527 | ||
| 50.0 MPa | 7250 psi | 50 mm/min; ISO 527 | |||
| 53.0 MPa | 7690 psi | Type I, 50 mm/min; ASTM D638 | |||
| Elongation at Break | 20 % | 20 % | 50 mm/min; ISO 527 | ||
| 24.3 % | 24.3 % | Type I, 50 mm/min; ASTM D638 | |||
| 45 % | 45 % | 5 mm/min; ISO 527 | |||
| Elongation at Yield | 3.6 % | 3.6 % | Type I, 50 mm/min; ASTM D638 | ||
| 4.0 % | 4.0 % | 5 mm/min; ISO 527 | |||
| 4.0 % | 4.0 % | 50 mm/min; ISO 527 | |||
| Tensile Modulus | 2.30 GPa | 334 ksi | 1 mm/min; ISO 527 | ||
| 2.40 GPa | 348 ksi | 50 mm/min; ASTM D638 | |||
| Flexural Yield Strength | 80.0 MPa | 11600 psi | 2 mm/min; ISO 178 | ||
| 86.0 MPa | 12500 psi | 1.3 mm/min, 50 mm span; ASTM D790 | |||
| Flexural Modulus | 2.44 GPa | 354 ksi | 1.3 mm/min, 50 mm span; ASTM D790 | ||
| 2.50 GPa | 363 ksi | 2 mm/min; ISO 178 | |||
| Izod Impact, Notched (ISO) | 10.0 kJ/m² | 4.76 ft-lb/in² | 80*10*4; ISO 180/1A | ||
| 8.00 kJ/m² @Temperature -30.0 °C |
3.81 ft-lb/in² @Temperature -22.0 °F |
80*10*4; ISO 180/1A | |||
| Charpy Impact, Notched | 1.30 J/cm² | 6.19 ft-lb/in² | Edgew 80*10*4 sp=62mm; ISO 179/1eA | ||
| 1.00 J/cm² @Temperature -30.0 °C |
4.76 ft-lb/in² @Temperature -22.0 °F |
Edgew 80*10*4 sp=62mm; ISO 179/1eA | |||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | >= 1.00e+15 ohm-cm | >= 1.00e+15 ohm-cm | IEC 60093 | ||
| Surface Resistance | >= 1.00e+15 ohm | >= 1.00e+15 ohm | ROA; IEC 60093 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 70.0 µm/m-°C @Temperature 23.0 - 80.0 °C |
38.9 µin/in-°F @Temperature 73.4 - 176 °F |
ISO 11359-2 | ||
| CTE, linear, Transverse to Flow | 87.0 µm/m-°C @Temperature 23.0 - 80.0 °C |
48.3 µin/in-°F @Temperature 73.4 - 176 °F |
ISO 11359-2 | ||
| Hot Ball Pressure Test | <= 100 °C | <= 212 °F | IEC 60695-10-2 | ||
| Deflection Temperature at 0.46 MPa (66 psi) | 114 °C | 237 °F | Flatw 80*10*4 sp=64mm; ISO 75/Bf | ||
| 116 °C @Thickness 3.20 mm |
241 °F @Thickness 0.126 in |
unannealed; ASTM D648 | |||
| Deflection Temperature at 1.8 MPa (264 psi) | 95.0 °C | 203 °F | Edgew 120*10*4 sp=100mm; ISO 75/Ae | ||
| 99.0 °C @Thickness 3.20 mm |
210 °F @Thickness 0.126 in |
unannealed; ASTM D648 | |||
| Vicat Softening Point | 113 °C | 235 °F | Rate B/50; ISO 306 | ||
| 115 °C | 239 °F | Rate B/120; ISO 306 | |||
| Flammability, UL94 | HB @Thickness 1.60 mm |
HB @Thickness 0.0630 in |
UL 94 by SABIC-IP | ||
| HB @Thickness 3.00 mm |
HB @Thickness 0.118 in |
UL 94 by SABIC-IP | |||
| Oxygen Index | 21 % | 21 % | ISO 4589 | ||
| De |
|||||
| Ball Pressure Test, 75°C +/- 2°C | PASSES | IEC 60695-10-2 |
|||
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生
手 机：13501802636
QQ ：205730283
邮 箱 ：205730283@qq.com