塑胶原料之家
  1. 首页
  2. 资讯
  3. 产品资讯
  4. PA66 12T NC010 具高抗张强度

PA66 12T NC010 具高抗张强度

PA66 12T NC010 PA66的收缩率在1%~2%之间，PA66 12T NC010 PA66加入玻璃纤维添加剂可以将收缩率降低到0.2%~1% 。PA66 12T NC010 PA66收缩率在流程方向和与流程方向相垂直方向上的相异是较大的。PA66对许多溶剂具有抗溶性，但对酸和其它一些氯化剂的抵抗力较弱。
 PA66 12T NC010 在产品设计时，一定要考虑吸湿性对几何稳定性的影响。为了提高PA66的机械特性，经常加入各种各样的改性剂。玻璃就是最常见的添加剂，有时为了提高抗冲击性还加入合成橡胶，如EPDM和SBR等。PA66的粘性较低，因此流动性很好（但不如PA6）。这个性质可以用来加工很薄的元件。它的粘度对温度变化很敏感。
 物性表：
Physical Properties Metric English Comments
Density  1.41 g/cc 0.0509 lb/in³ DAM; ISO 1183
Water Absorption  6.2 %
@Thickness 2.00 mm		 6.2 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Moisture Absorption  1.70 %
@Thickness 2.00 mm		 1.70 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Water Absorption at Saturation  1.2 % 1.2 % DAM; Immersion 24h; ASTM D570
Linear Mold Shrinkage, Flow  0.0090 cm/cm 0.0090 in/in DAM; ISO 294-4 2577
Linear Mold Shrinkage, Transverse  0.0090 cm/cm 0.0090 in/in DAM; ISO 294-4 2577
 
Mechanical Properties Metric English Comments
Tensile Strength at Break  58.0 MPa 8410 psi 50%RH; ISO 527-1/-2
  80.0 MPa 11600 psi DAM; ISO 527-1/-2
Tensile Stress    2.20 MPa
@Strain 0.100 %,
Temperature 23.0 °C		 319 psi
@Strain 0.100 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  3.34 MPa
@Strain 0.400 %,
Temperature 150 °C		 484 psi
@Strain 0.400 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  6.31 MPa
@Strain 1.10 %,
Temperature 150 °C		 915 psi
@Strain 1.10 %,
Temperature 302 °F		 50%RH; ISO 11403-1 -2
  10.28 MPa
@Strain 1.70 %,
Temperature 150 °C		 1491 psi
@Strain 1.70 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  10.73 MPa
@Strain 0.200 %,
Temperature 0.000 °C		 1556 psi
@Strain 0.200 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  11.06 MPa
@Strain 2.30 %,
Temperature 150 °C		 1604 psi
@Strain 2.30 %,
Temperature 302 °F		 50%RH; ISO 11403-1 -2
  12.9 MPa
@Strain 0.700 %,
Temperature 23.0 °C		 1870 psi
@Strain 0.700 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  15.3 MPa
@Strain 0.300 %,
Temperature 0.000 °C		 2220 psi
@Strain 0.300 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  15.36 MPa
@Strain 3.20 %,
Temperature 150 °C		 2228 psi
@Strain 3.20 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  15.52 MPa
@Strain 4.00 %,
Temperature 150 °C		 2251 psi
@Strain 4.00 %,
Temperature 302 °F		 50%RH; ISO 11403-1 -2
  18.53 MPa
@Strain 6.00 %,
Temperature 150 °C		 2688 psi
@Strain 6.00 %,
Temperature 302 °F		 50%RH; ISO 11403-1 -2
  18.83 MPa
@Strain 4.90 %,
Temperature 150 °C		 2731 psi
@Strain 4.90 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  20.3 MPa
@Strain 0.300 %,
Temperature -40.0 °C		 2940 psi
@Strain 0.300 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  21.0 MPa
@Strain 0.400 %,
Temperature 23.0 °C		 3050 psi
@Strain 0.400 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  22.3 MPa
@Strain 1.60 %,
Temperature 23.0 °C		 3230 psi
@Strain 1.60 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  26.77 MPa
@Strain 40.0 %,
Temperature 150 °C		 3883 psi
@Strain 40.0 %,
Temperature 302 °F		 50%RH; ISO 11403-1 -2
  29.55 MPa
@Strain 0.500 %,
Temperature -40.0 °C		 4286 psi
@Strain 0.500 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  30.3 MPa
@Strain 2.90 %,
Temperature 23.0 °C		 4390 psi
@Strain 2.90 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  31.31 MPa
@Strain 0.600 %,
Temperature 0.000 °C		 4541 psi
@Strain 0.600 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  37.9 MPa
@Strain 0.800 %,
Temperature 0.000 °C		 5500 psi
@Strain 0.800 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  44.2 MPa
@Strain 0.900 %,
Temperature 23.0 °C		 6410 psi
@Strain 0.900 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  50.4 MPa
@Strain 0.800 %,
Temperature -40.0 °C		 7310 psi
@Strain 0.800 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  52.7 MPa
@Strain 1.40 %,
Temperature 0.000 °C		 7640 psi
@Strain 1.40 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  55.3 MPa
@Strain 1.20 %,
Temperature 23.0 °C		 8020 psi
@Strain 1.20 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  55.4 MPa
@Strain 40.0 %,
Temperature 23.0 °C		 8040 psi
@Strain 40.0 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  57.45 MPa
@Strain 1.20 %,
Temperature 0.000 °C		 8332 psi
@Strain 1.20 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  63.5 MPa
@Strain 2.50 %,
Temperature 0.000 °C		 9210 psi
@Strain 2.50 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  65.3 MPa
@Strain 1.10 %,
Temperature -40.0 °C		 9470 psi
@Strain 1.10 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  65.9 MPa
@Strain 1.60 %,
Temperature 23.0 °C		 9560 psi
@Strain 1.60 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  72.67 MPa
@Strain 1.40 %,
Temperature -40.0 °C		 10540 psi
@Strain 1.40 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  73.15 MPa
@Strain 1.70 %,
Temperature 0.000 °C		 10610 psi
@Strain 1.70 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  78.0 MPa
@Strain 4.00 %,
Temperature 23.0 °C		 11300 psi
@Strain 4.00 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  79.9 MPa
@Strain 24.0 %,
Temperature 0.000 °C		 11600 psi
@Strain 24.0 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  84.2 MPa
@Strain 1.60 %,
Temperature -40.0 °C		 12200 psi
@Strain 1.60 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  89.79 MPa
@Strain 1.90 %,
Temperature -40.0 °C		 13020 psi
@Strain 1.90 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  92.72 MPa
@Strain 4.20 %,
Temperature 0.000 °C		 13450 psi
@Strain 4.20 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  101.96 MPa
@Strain 2.40 %,
Temperature -40.0 °C		 14788 psi
@Strain 2.40 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  116.2 MPa
@Strain 8.00 %,
Temperature -40.0 °C		 16850 psi
@Strain 8.00 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
Elongation at Break  18 % 18 % DAM; ISO 527-1/-2
  40 % 40 % 50%RH; ISO 527-1/-2
Tensile Modulus  2.00 GPa 290 ksi 50%RH; ISO 527-1/-2
  4.90 GPa 711 ksi DAM; ISO 527-1/-2
Flexural Modulus  1.80 GPa 261 ksi 50%RH; ISO 178
  4.50 GPa 653 ksi DAM; ISO 178
Secant Modulus    0.0997368 GPa
@Strain 38.0 %,
Temperature 80.0 °C		 14.4658 ksi
@Strain 38.0 %,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  0.127411 GPa
@Strain 30.9 %,
Temperature 100 °C		 18.4797 ksi
@Strain 30.9 %,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  0.154045 GPa
@Strain 30.9 %,
Temperature 80.0 °C		 22.3427 ksi
@Strain 30.9 %,
Temperature 176 °F		 DAM; ISO 11403-1 -2
  0.171579 GPa
@Strain 19.0 %,
Temperature 100 °C		 24.8858 ksi
@Strain 19.0 %,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  0.232857 GPa
@Strain 14.0 %,
Temperature 80.0 °C		 33.7736 ksi
@Strain 14.0 %,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  0.305814 GPa
@Strain 12.9 %,
Temperature 80.0 °C		 44.3553 ksi
@Strain 12.9 %,
Temperature 176 °F		 DAM; ISO 11403-1 -2
  0.31766 GPa
@Strain 9.40 %,
Temperature 100 °C		 46.073 ksi
@Strain 9.40 %,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  0.356 GPa
@Strain 7.50 %,
Temperature 100 °C		 51.6 ksi
@Strain 7.50 %,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  0.428333 GPa
@Strain 6.00 %,
Temperature 80.0 °C		 62.1254 ksi
@Strain 6.00 %,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  0.467 GPa
@Strain 10.0 %,
Temperature 23.0 °C		 67.7 ksi
@Strain 10.0 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  0.541667 GPa
@Strain 3.60 %,
Temperature 100 °C		 78.5634 ksi
@Strain 3.60 %,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  0.607 GPa
@Strain 3.00 %,
Temperature 100 °C		 88.0 ksi
@Strain 3.00 %,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  0.626889 GPa
@Strain 4.50 %,
Temperature 80.0 °C		 90.9240 ksi
@Strain 4.50 %,
Temperature 176 °F		 DAM; ISO 11403-1 -2
  0.680 GPa
@Strain 2.50 %,
Temperature 80.0 °C		 98.6 ksi
@Strain 2.50 %,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  0.692727 GPa
@Strain 11.0 %,
Temperature 0.000 °C		 100.473 ksi
@Strain 11.0 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  0.726667 GPa
@Strain 1.50 %,
Temperature 100 °C		 105.396 ksi
@Strain 1.50 %,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  0.768 GPa
@Strain 5.00 %,
Temperature 23.0 °C		 111 ksi
@Strain 5.00 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  0.785385 GPa
@Strain 1.30 %,
Temperature 100 °C		 113.912 ksi
@Strain 1.30 %,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  0.860 GPa
@Strain 0.500 %,
Temperature 100 °C		 125 ksi
@Strain 0.500 %,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  0.900 GPa
@Strain 0.600 %,
Temperature 100 °C		 131 ksi
@Strain 0.600 %,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  0.995 GPa
@Strain 1.60 %,
Temperature 80.0 °C		 144 ksi
@Strain 1.60 %,
Temperature 176 °F		 DAM; ISO 11403-1 -2
  1.025 GPa
@Strain 0.400 %,
Temperature 80.0 °C		 148.7 ksi
@Strain 0.400 %,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  1.255 GPa
@Strain 2.00 %,
Temperature 23.0 °C		 182.0 ksi
@Strain 2.00 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1.274 GPa
@Strain 0.500 %,
Temperature 80.0 °C		 184.8 ksi
@Strain 0.500 %,
Temperature 176 °F		 DAM; ISO 11403-1 -2
  1.575 GPa
@Strain 4.40 %,
Temperature 0.000 °C		 228.4 ksi
@Strain 4.40 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  1.84286 GPa
@Strain 0.700 %,
Temperature 23.0 °C		 267.288 ksi
@Strain 0.700 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2.20 GPa
@Strain 0.100 %,
Temperature 23.0 °C		 319 ksi
@Strain 0.100 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2.41 GPa
@Strain 4.90 %,
Temperature -40.0 °C		 350 ksi
@Strain 4.90 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  2.75357 GPa
@Strain 2.80 %,
Temperature 23.0 °C		 399.378 ksi
@Strain 2.80 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  2.76879 GPa
@Strain 3.30 %,
Temperature 0.000 °C		 401.585 ksi
@Strain 3.30 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  3.48125 GPa
@Strain 1.60 %,
Temperature 0.000 °C		 504.920 ksi
@Strain 1.60 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  3.49355 GPa
@Strain 3.10 %,
Temperature -40.0 °C		 506.704 ksi
@Strain 3.10 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  3.61 GPa
@Strain 2.00 %,
Temperature 23.0 °C		 524 ksi
@Strain 2.00 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  3.86464 GPa
@Strain 2.80 %,
Temperature -40.0 °C		 560.527 ksi
@Strain 2.80 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  3.87905 GPa
@Strain 2.10 %,
Temperature 0.000 °C		 562.617 ksi
@Strain 2.10 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  4.48462 GPa
@Strain 1.30 %,
Temperature 23.0 °C		 650.449 ksi
@Strain 1.30 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  4.53143 GPa
@Strain 2.10 %,
Temperature -40.0 °C		 657.239 ksi
@Strain 2.10 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  4.60786 GPa
@Strain 1.40 %,
Temperature 0.000 °C		 668.324 ksi
@Strain 1.40 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  4.7375 GPa
@Strain 0.800 %,
Temperature 0.000 °C		 687.13 ksi
@Strain 0.800 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  4.91111 GPa
@Strain 0.900 %,
Temperature 23.0 °C		 712.307 ksi
@Strain 0.900 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  4.98889 GPa
@Strain 1.80 %,
Temperature -40.0 °C		 723.589 ksi
@Strain 1.80 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  5.10 GPa
@Strain 0.300 %,
Temperature 0.000 °C		 740 ksi
@Strain 0.300 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  5.19071 GPa
@Strain 1.40 %,
Temperature -40.0 °C		 752.861 ksi
@Strain 1.40 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  5.21833 GPa
@Strain 0.600 %,
Temperature 0.000 °C		 756.867 ksi
@Strain 0.600 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  5.25 GPa
@Strain 0.400 %,
Temperature 23.0 °C		 761 ksi
@Strain 0.400 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  5.365 GPa
@Strain 0.200 %,
Temperature 0.000 °C		 778.1 ksi
@Strain 0.200 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  5.66923 GPa
@Strain 1.30 %,
Temperature -40.0 °C		 822.265 ksi
@Strain 1.30 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  5.91 GPa
@Strain 0.500 %,
Temperature -40.0 °C		 857 ksi
@Strain 0.500 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  6.30 GPa
@Strain 0.800 %,
Temperature -40.0 °C		 914 ksi
@Strain 0.800 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  6.76667 GPa
@Strain 0.300 %,
Temperature -40.0 °C		 981.438 ksi
@Strain 0.300 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
Izod Impact, Notched (ISO)  9.00 kJ/m² 4.28 ft-lb/in² DAM; ISO 180/1A
  13.0 kJ/m² 6.19 ft-lb/in² 50%RH; ISO 180/1A
  5.00 kJ/m²
@Temperature -40.0 °C		 2.38 ft-lb/in²
@Temperature -40.0 °F		 DAM; ISO 180/1A
  5.00 kJ/m²
@Temperature -40.0 °C		 2.38 ft-lb/in²
@Temperature -40.0 °F		 50%RH; ISO 180/1A
  6.00 kJ/m²
@Temperature -30.0 °C		 2.86 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 180/1A
  6.00 kJ/m²
@Temperature -30.0 °C		 2.86 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 180/1A
Izod Impact, Unnotched (ISO)  190 kJ/m² 90.4 ft-lb/in² DAM; ISO 180/1U
  330 kJ/m² 157 ft-lb/in² 50%RH; ISO 180/1U
   90.0 kJ/m²
@Temperature -30.0 °C		 42.8 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 180/1U
  100 kJ/m²
@Temperature -30.0 °C		 47.6 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 180/1U
Charpy Impact Unnotched  21.0 J/cm² 99.9 ft-lb/in² DAM; ISO 179/1eU
  33.0 J/cm² 157 ft-lb/in² 50%RH; ISO 179/1eU
   9.00 J/cm²
@Temperature -30.0 °C		 42.8 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eU
  12.0 J/cm²
@Temperature -30.0 °C		 57.1 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 179/1eU
Charpy Impact, Notched  0.900 J/cm² 4.28 ft-lb/in² DAM; ISO 179/1eA
  1.50 J/cm² 7.14 ft-lb/in² 50%RH; ISO 179/1eA
   0.300 J/cm²
@Temperature -40.0 °C		 1.43 ft-lb/in²
@Temperature -40.0 °F		 50%RH; ISO 179/1eA
  0.400 J/cm²
@Temperature -30.0 °C		 1.90 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 179/1eA
  0.400 J/cm²
@Temperature -40.0 °C		 1.90 ft-lb/in²
@Temperature -40.0 °F		 DAM; ISO 179/1eA
  0.500 J/cm²
@Temperature -30.0 °C		 2.38 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eA
 
Electrical Properties Metric English Comments
Volume Resistivity  1.00e+13 ohm-cm 1.00e+13 ohm-cm DAM; IEC 60093
Dielectric Constant    3.8
@Frequency 1.00e+6 Hz		 3.8
@Frequency 1.00e+6 Hz		 DAM; IEC 60250
  4.0
@Frequency 100 Hz		 4.0
@Frequency 100 Hz		 DAM; IEC 60250
Dielectric Strength  24.0 kV/mm 610 kV/in DAM; IEC 60243-1
Dissipation Factor    0.010
@Frequency 100 Hz		 0.010
@Frequency 100 Hz		 DAM; IEC 60250
  0.010
@Frequency 1.00e+6 Hz		 0.010
@Frequency 1.00e+6 Hz		 DAM; IEC 60250
Comparative Tracking Index  400 V 400 V DAM; IEC 60112
 
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow  64.0 µm/m-°C 35.6 µin/in-°F DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow  65.0 µm/m-°C 36.1 µin/in-°F DAM; ISO 11359-1/-2
Melting Point  256 °C 493 °F DAM; 10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)  205 °C 401 °F DAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)  80.0 °C 176 °F DAM; ISO 75-1/-2
Flammability, UL94  HB
@Thickness 0.800 mm		 HB
@Thickness 0.0315 in		 DAM; IEC 60695-11-10
Oxygen Index  25 % 25 % DAM; ISO 4589-1/-2
 
Descriptive Properties
Delivery form Pellets  
Part Marking Code >PA66-IMD36< ISO 11469
Processing Injection Moulding  
Regional Availability North America  
  South and Central America  
Resin Identification PA66-IMD36  
Special characteristics Heat stabilised or stable to heat
 
尼龙中的主要品种是尼龙6和尼龙66，占绝对主导地位，其次是尼龙11，尼龙12，尼龙610，尼龙612，另外还有尼龙 1010，尼龙46，尼龙7，尼龙9，尼龙13，新品种有尼龙6I，尼龙9T和特殊尼龙MXD6（阻隔性树脂）等，尼龙的改性品种数量繁多，如增强尼龙，单体浇铸尼龙（MC尼龙），反应注射成型（RIM）尼龙，芳香族尼龙，透明尼龙，高抗冲（超韧）尼龙，电镀尼龙，导电尼龙，阻燃尼龙，尼龙与其他聚合物共混物和合金等，满足不同特殊要求，广泛用作金属，木材等传统材料代用品，作为各种结构材料。   
颗粒04
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生  
手  机：13501802636   
QQ    ：205730283  
邮 箱 ：205730283@qq.com 
 

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/news/

本文链接: http://www.su-jiao.com/news/show-25424.html

免责声明: 本文 PA66 12T NC010 具高抗张强度 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他资讯信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4