塑胶原料之家
  1. 首页
  2. 资讯
  3. 产品资讯
  4. PA66 22C NC010 Nylon66 具有优良耐磨性

PA66 22C NC010 Nylon66 具有优良耐磨性

PA66 22C NC010 Nylon66的收缩率在1%~2%之间，PA66 22C NC010 Nylon66加入玻璃纤维添加剂可以将收缩率降低到0.2%~1% 。PA66 22C NC010 Nylon66收缩率在流程方向和与流程方向相垂直方向上的相异是较大的。PA66对许多溶剂具有抗溶性，但对酸和其它一些氯化剂的抵抗力较弱。
 PA66 22C NC010 Nylon66注射速度：高速（对于增强型材料应稍低一些）。 流道和浇口：由于PA66的凝固时间很短，因此浇口的位置非常重要。浇口孔径不要小于0.5t（这里t为塑件厚度）。如果使用热流道，浇口尺寸应比使用常规流道小一些，因为热流道能够帮助阻止材料过早凝固。如果用潜入式浇口，浇口的最小直径应当是0.75mm。典型用途 PA66更广泛应用于汽车工业、仪器壳体以及其它需要有抗冲击性和高强度要求的产品。
 物性表：
Physical Properties Metric English Comments
Density  1.28 g/cc 0.0462 lb/in³  
  1.45 g/cc 0.0524 lb/in³ DAM; ISO 1183
Water Absorption  5.4 %
@Thickness 2.00 mm		 5.4 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Moisture Absorption  1.40 %
@Thickness 2.00 mm		 1.40 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Water Absorption at Saturation  1.0 % 1.0 % DAM; Immersion 24h; ASTM D570
Viscosity    65518.4 cP
@Shear Rate 5000 1/s,
Temperature 305 °C		 65518.4 cP
@Shear Rate 5000 1/s,
Temperature 581 °F		 ISO 11403-1 -2
  80210.1 cP
@Shear Rate 5000 1/s,
Temperature 295 °C		 80210.1 cP
@Shear Rate 5000 1/s,
Temperature 563 °F		 ISO 11403-1 -2
  99512 cP
@Shear Rate 5000 1/s,
Temperature 285 °C		 99512 cP
@Shear Rate 5000 1/s,
Temperature 545 °F		 ISO 11403-1 -2
  174481 cP
@Shear Rate 500 1/s,
Temperature 305 °C		 174481 cP
@Shear Rate 500 1/s,
Temperature 581 °F		 ISO 11403-1 -2
  232902 cP
@Shear Rate 500 1/s,
Temperature 295 °C		 232902 cP
@Shear Rate 500 1/s,
Temperature 563 °F		 ISO 11403-1 -2
  311074 cP
@Shear Rate 500 1/s,
Temperature 285 °C		 311074 cP
@Shear Rate 500 1/s,
Temperature 545 °F		 ISO 11403-1 -2
Viscosity Test  150 cm³/g 150 cm³/g DAM; ISO 307 1157 1628
Linear Mold Shrinkage, Flow  0.0070 cm/cm 0.0070 in/in DAM; ISO 294-4 2577
Linear Mold Shrinkage, Transverse  0.0090 cm/cm 0.0090 in/in DAM; ISO 294-4 2577
 
Mechanical Properties Metric English Comments
Tensile Strength at Break  82.0 MPa 11900 psi 50%RH; ISO 527-1/-2
  130 MPa 18900 psi DAM; ISO 527-1/-2
Tensile Stress    4.30 MPa
@Strain 0.200 %,
Temperature 150 °C		 624 psi
@Strain 0.200 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  4.60 MPa
@Strain 0.100 %,
Temperature 23.0 °C		 667 psi
@Strain 0.100 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  7.20 MPa
@Strain 0.100 %,
Temperature 23.0 °C		 1040 psi
@Strain 0.100 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  7.60 MPa
@Strain 0.100 %,
Temperature 0.000 °C		 1100 psi
@Strain 0.100 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  8.90 MPa
@Strain 0.400 %,
Temperature 150 °C		 1290 psi
@Strain 0.400 %,
Temperature 302 °F		 50%RH; ISO 11403-1 -2
  17.3 MPa
@Strain 0.900 %,
Temperature 150 °C		 2510 psi
@Strain 0.900 %,
Temperature 302 °F		 50%RH; ISO 11403-1 -2
  17.4519 MPa
@Strain 0.200 %,
Temperature -40.0 °C		 2531.19 psi
@Strain 0.200 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  17.6 MPa
@Strain 0.900 %,
Temperature 150 °C		 2550 psi
@Strain 0.900 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  18.3 MPa
@Strain 0.200 %,
Temperature 0.000 °C		 2650 psi
@Strain 0.200 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  19.87 MPa
@Strain 0.200 %,
Temperature -40.0 °C		 2882 psi
@Strain 0.200 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  22.9 MPa
@Strain 1.30 %,
Temperature 150 °C		 3320 psi
@Strain 1.30 %,
Temperature 302 °F		 50%RH; ISO 11403-1 -2
  26.0 MPa
@Strain 0.600 %,
Temperature 23.0 °C		 3770 psi
@Strain 0.600 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  32.2 MPa
@Strain 2.10 %,
Temperature 150 °C		 4670 psi
@Strain 2.10 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  34.3 MPa
@Strain 2.60 %,
Temperature 150 °C		 4970 psi
@Strain 2.60 %,
Temperature 302 °F		 50%RH; ISO 11403-1 -2
  39.2 MPa
@Strain 1.00 %,
Temperature 23.0 °C		 5690 psi
@Strain 1.00 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  40.2 MPa
@Strain 3.20 %,
Temperature 150 °C		 5830 psi
@Strain 3.20 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  41.5 MPa
@Strain 0.500 %,
Temperature 0.000 °C		 6020 psi
@Strain 0.500 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  51.7 MPa
@Strain 1.50 %,
Temperature 23.0 °C		 7500 psi
@Strain 1.50 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  55.5046 MPa
@Strain 0.700 %,
Temperature -40.0 °C		 8050.28 psi
@Strain 0.700 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  57.12 MPa
@Strain 0.600 %,
Temperature -40.0 °C		 8285 psi
@Strain 0.600 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  60.1 MPa
@Strain 0.800 %,
Temperature 0.000 °C		 8720 psi
@Strain 0.800 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  62.24 MPa
@Strain 0.900 %,
Temperature 23.0 °C		 9027 psi
@Strain 0.900 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  64.1 MPa
@Strain 0.900 %,
Temperature 0.000 °C		 9300 psi
@Strain 0.900 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  79.97 MPa
@Strain 0.900 %,
Temperature -40.0 °C		 11600 psi
@Strain 0.900 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  80.3 MPa
@Strain 1.30 %,
Temperature 0.000 °C		 11600 psi
@Strain 1.30 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  84.53 MPa
@Strain 1.30 %,
Temperature 23.0 °C		 12260 psi
@Strain 1.30 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  86.6 MPa
@Strain 1.20 %,
Temperature 0.000 °C		 12600 psi
@Strain 1.20 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  93.4934 MPa
@Strain 1.30 %,
Temperature -40.0 °C		 13560.1 psi
@Strain 1.30 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  101.13 MPa
@Strain 1.70 %,
Temperature 23.0 °C		 14668 psi
@Strain 1.70 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  103 MPa
@Strain 1.50 %,
Temperature 0.000 °C		 14900 psi
@Strain 1.50 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  104.54 MPa
@Strain 1.30 %,
Temperature -40.0 °C		 15162 psi
@Strain 1.30 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  114.745 MPa
@Strain 1.70 %,
Temperature -40.0 °C		 16642.4 psi
@Strain 1.70 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  126.42 MPa
@Strain 3.30 %,
Temperature 23.0 °C		 18336 psi
@Strain 3.30 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  149.8 MPa
@Strain 3.20 %,
Temperature 0.000 °C		 21730 psi
@Strain 3.20 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  160.7 MPa
@Strain 3.20 %,
Temperature -40.0 °C		 23310 psi
@Strain 3.20 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  165.852 MPa
@Strain 3.20 %,
Temperature -40.0 °C		 24054.8 psi
@Strain 3.20 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
   10.0 MPa
@Strain 0.340 %,
Time 3600 sec		 1450 psi
@Strain 0.340 %,
Time 1.00 hour		 50%RH; isochronous; ISO 11403-1 -2
  10.0 MPa
@Strain 0.370 %,
Time 36000 sec		 1450 psi
@Strain 0.370 %,
Time 10.0 hour		 50%RH; isochronous; ISO 11403-1 -2
  10.0 MPa
@Strain 0.410 %,
Time 360000 sec		 1450 psi
@Strain 0.410 %,
Time 100 hour		 50%RH; isochronous; ISO 11403-1 -2
  10.0 MPa
@Strain 0.460 %,
Time 3.60e+6 sec		 1450 psi
@Strain 0.460 %,
Time 1000 hour		 50%RH; isochronous; ISO 11403-1 -2
Elongation at Break  3.5 % 3.5 % DAM; ISO 527-1/-2
  10 % 10 % 50%RH; ISO 527-1/-2
Tensile Modulus  5.00 GPa 725 ksi 50%RH; ISO 527-1/-2
  7.50 GPa 1090 ksi DAM; ISO 527-1/-2
   1.4166 GPa
@Temperature 170 °C		 205.46 ksi
@Temperature 338 °F		 50%RH; Dynamic; ISO 11403-1 -2
  1.83922 GPa
@Temperature 110 °C		 266.757 ksi
@Temperature 230 °F		 50%RH; Dynamic; ISO 11403-1 -2
  1.965 GPa
@Temperature 170 °C		 285.0 ksi
@Temperature 338 °F		 DAM; Dynamic; ISO 11403-1 -2
  2.649 GPa
@Temperature 110 °C		 384.2 ksi
@Temperature 230 °F		 DAM; Dynamic; ISO 11403-1 -2
  5.03983 GPa
@Temperature 30.0 °C		 730.967 ksi
@Temperature 86.0 °F		 50%RH; Dynamic; ISO 11403-1 -2
  5.88286 GPa
@Temperature -20.0 °C		 853.238 ksi
@Temperature -4.00 °F		 50%RH; Dynamic; ISO 11403-1 -2
  6.55141 GPa
@Temperature -70.0 °C		 950.203 ksi
@Temperature -94.0 °F		 50%RH; Dynamic; ISO 11403-1 -2
  6.942 GPa
@Temperature -100 °C		 1007 ksi
@Temperature -148 °F		 50%RH; Dynamic; ISO 11403-1 -2
  7.137 GPa
@Temperature 30.0 °C		 1035 ksi
@Temperature 86.0 °F		 DAM; Dynamic; ISO 11403-1 -2
  7.24 GPa
@Temperature -20.0 °C		 1050 ksi
@Temperature -4.00 °F		 DAM; Dynamic; ISO 11403-1 -2
  7.739 GPa
@Temperature -70.0 °C		 1122 ksi
@Temperature -94.0 °F		 DAM; Dynamic; ISO 11403-1 -2
  8.00 GPa
@Temperature -100 °C		 1160 ksi
@Temperature -148 °F		 DAM; Dynamic; ISO 11403-1 -2
Flexural Modulus  5.00 GPa 725 ksi 50%RH; ISO 178
  6.50 GPa 943 ksi DAM; ISO 178
Shear Modulus    0.711609 GPa
@Temperature 100 °C		 103.212 ksi
@Temperature 212 °F		 50%RH; Dynamic; ISO 11403-1 -2
  1.04223 GPa
@Temperature 60.0 °C		 151.165 ksi
@Temperature 140 °F		 50%RH; Dynamic; ISO 11403-1 -2
  1.095 GPa
@Temperature 100 °C		 158.8 ksi
@Temperature 212 °F		 DAM; Dynamic; ISO 11403-1 -2
  2.02131 GPa
@Temperature 10.0 °C		 293.171 ksi
@Temperature 50.0 °F		 50%RH; Dynamic; ISO 11403-1 -2
  2.15186 GPa
@Temperature -40.0 °C		 312.106 ksi
@Temperature -40.0 °F		 50%RH; Dynamic; ISO 11403-1 -2
  2.33774 GPa
@Temperature -70.0 °C		 339.066 ksi
@Temperature -94.0 °F		 50%RH; Dynamic; ISO 11403-1 -2
  2.403 GPa
@Temperature 60.0 °C		 348.5 ksi
@Temperature 140 °F		 DAM; Dynamic; ISO 11403-1 -2
  2.478 GPa
@Temperature -100 °C		 359.4 ksi
@Temperature -148 °F		 50%RH; Dynamic; ISO 11403-1 -2
  2.684 GPa
@Temperature 10.0 °C		 389.3 ksi
@Temperature 50.0 °F		 DAM; Dynamic; ISO 11403-1 -2
  2.738 GPa
@Temperature -40.0 °C		 397.1 ksi
@Temperature -40.0 °F		 DAM; Dynamic; ISO 11403-1 -2
  2.888 GPa
@Temperature -70.0 °C		 418.9 ksi
@Temperature -94.0 °F		 DAM; Dynamic; ISO 11403-1 -2
  2.986 GPa
@Temperature -100 °C		 433.1 ksi
@Temperature -148 °F		 DAM; Dynamic; ISO 11403-1 -2
Secant Modulus    0.784 GPa
@Strain 7.50 %,
Temperature 100 °C		 114 ksi
@Strain 7.50 %,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  1.13683 GPa
@Strain 6.00 %,
Temperature 80.0 °C		 164.886 ksi
@Strain 6.00 %,
Temperature 176 °F		 DAM; ISO 11403-1 -2
  1.36667 GPa
@Strain 3.90 %,
Temperature 80.0 °C		 198.222 ksi
@Strain 3.90 %,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  1.42857 GPa
@Strain 3.50 %,
Temperature 100 °C		 207.200 ksi
@Strain 3.50 %,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  1.51724 GPa
@Strain 2.90 %,
Temperature 100 °C		 220.060 ksi
@Strain 2.90 %,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  1.77229 GPa
@Strain 3.50 %,
Temperature 80.0 °C		 257.053 ksi
@Strain 3.50 %,
Temperature 176 °F		 DAM; ISO 11403-1 -2
  1.816 GPa
@Strain 2.50 %,
Temperature 80.0 °C		 263.4 ksi
@Strain 2.50 %,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  1.825 GPa
@Strain 2.00 %,
Temperature 100 °C		 264.7 ksi
@Strain 2.00 %,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  2.00 GPa
@Strain 1.60 %,
Temperature 100 °C		 290 ksi
@Strain 1.60 %,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  2.035 GPa
@Strain 4.00 %,
Temperature 23.0 °C		 295.2 ksi
@Strain 4.00 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2.23571 GPa
@Strain 1.40 %,
Temperature 80.0 °C		 324.267 ksi
@Strain 1.40 %,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  2.27048 GPa
@Strain 2.10 %,
Temperature 80.0 °C		 329.310 ksi
@Strain 2.10 %,
Temperature 176 °F		 DAM; ISO 11403-1 -2
  2.31429 GPa
@Strain 0.700 %,
Temperature 100 °C		 335.665 ksi
@Strain 0.700 %,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  2.32222 GPa
@Strain 0.900 %,
Temperature 100 °C		 336.815 ksi
@Strain 0.900 %,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  2.40 GPa
@Strain 0.200 %,
Temperature 100 °C		 348 ksi
@Strain 0.200 %,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  2.65 GPa
@Strain 0.200 %,
Temperature 100 °C		 384 ksi
@Strain 0.200 %,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  2.83333 GPa
@Strain 0.300 %,
Temperature 80.0 °C		 410.946 ksi
@Strain 0.300 %,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  2.90 GPa
@Strain 0.900 %,
Temperature 80.0 °C		 421 ksi
@Strain 0.900 %,
Temperature 176 °F		 DAM; ISO 11403-1 -2
  3.00952 GPa
@Strain 2.10 %,
Temperature 23.0 °C		 436.501 ksi
@Strain 2.10 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  3.265 GPa
@Strain 0.200 %,
Temperature 80.0 °C		 473.6 ksi
@Strain 0.200 %,
Temperature 176 °F		 DAM; ISO 11403-1 -2
  3.80909 GPa
@Strain 1.10 %,
Temperature 23.0 °C		 552.470 ksi
@Strain 1.10 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  4.10 GPa
@Strain 2.70 %,
Temperature 0.000 °C		 595 ksi
@Strain 2.70 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  4.33333 GPa
@Strain 0.600 %,
Temperature 23.0 °C		 628.506 ksi
@Strain 0.600 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  4.54963 GPa
@Strain 2.70 %,
Temperature 23.0 °C		 659.878 ksi
@Strain 2.70 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  4.60 GPa
@Strain 0.100 %,
Temperature 23.0 °C		 667 ksi
@Strain 0.100 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  5.40385 GPa
@Strain 2.60 %,
Temperature 0.000 °C		 783.774 ksi
@Strain 2.60 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  5.42941 GPa
@Strain 1.70 %,
Temperature 0.000 °C		 787.482 ksi
@Strain 1.70 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  5.515 GPa
@Strain 2.00 %,
Temperature 23.0 °C		 799.9 ksi
@Strain 2.00 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  5.57554 GPa
@Strain 2.80 %,
Temperature -40.0 °C		 808.676 ksi
@Strain 2.80 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  6.09583 GPa
@Strain 2.40 %,
Temperature -40.0 °C		 884.139 ksi
@Strain 2.40 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  6.24667 GPa
@Strain 1.50 %,
Temperature 23.0 °C		 906.017 ksi
@Strain 1.50 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  6.33684 GPa
@Strain 1.90 %,
Temperature 0.000 °C		 919.095 ksi
@Strain 1.90 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  6.41885 GPa
@Strain 2.00 %,
Temperature -40.0 °C		 930.990 ksi
@Strain 2.00 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  6.86 GPa
@Strain 1.00 %,
Temperature 0.000 °C		 995 ksi
@Strain 1.00 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  6.91556 GPa
@Strain 0.900 %,
Temperature 23.0 °C		 1003.03 ksi
@Strain 0.900 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  6.96793 GPa
@Strain 1.50 %,
Temperature -40.0 °C		 1010.63 ksi
@Strain 1.50 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  7.10769 GPa
@Strain 1.30 %,
Temperature 0.000 °C		 1030.90 ksi
@Strain 1.30 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  7.20 GPa
@Strain 0.100 %,
Temperature 23.0 °C		 1040 ksi
@Strain 0.100 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  7.5125 GPa
@Strain 0.800 %,
Temperature 0.000 °C		 1089.6 ksi
@Strain 0.800 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  7.60 GPa
@Strain 0.100 %,
Temperature 0.000 °C		 1100 ksi
@Strain 0.100 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  7.64133 GPa
@Strain 1.50 %,
Temperature -40.0 °C		 1108.30 ksi
@Strain 1.50 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  7.92923 GPa
@Strain 0.700 %,
Temperature -40.0 °C		 1150.06 ksi
@Strain 0.700 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  8.30 GPa
@Strain 0.500 %,
Temperature 0.000 °C		 1200 ksi
@Strain 0.500 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  8.669 GPa
@Strain 1.00 %,
Temperature -40.0 °C		 1257 ksi
@Strain 1.00 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  8.72595 GPa
@Strain 0.200 %,
Temperature -40.0 °C		 1265.61 ksi
@Strain 0.200 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  9.15 GPa
@Strain 0.200 %,
Temperature 0.000 °C		 1330 ksi
@Strain 0.200 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  9.52 GPa
@Strain 0.600 %,
Temperature -40.0 °C		 1380 ksi
@Strain 0.600 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  9.935 GPa
@Strain 0.200 %,
Temperature -40.0 °C		 1441 ksi
@Strain 0.200 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
Izod Impact, Notched (ISO)  5.00 kJ/m² 2.38 ft-lb/in² DAM; ISO 180/1A
  6.00 kJ/m² 2.86 ft-lb/in² 50%RH; ISO 180/1A
   4.00 kJ/m²
@Temperature -30.0 °C		 1.90 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 180/1A
  4.00 kJ/m²
@Temperature -30.0 °C		 1.90 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 180/1A
  4.00 kJ/m²
@Temperature -40.0 °C		 1.90 ft-lb/in²
@Temperature -40.0 °F		 DAM; ISO 180/1A
  4.00 kJ/m²
@Temperature -40.0 °C		 1.90 ft-lb/in²
@Temperature -40.0 °F		 50%RH; ISO 180/1A
Izod Impact, Unnotched (ISO)  40.0 kJ/m² 19.0 ft-lb/in² 50%RH; ISO 180/1U
  50.0 kJ/m² 23.8 ft-lb/in² DAM; ISO 180/1U
   40.0 kJ/m²
@Temperature -30.0 °C		 19.0 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 180/1U
  50.0 kJ/m²
@Temperature -30.0 °C		 23.8 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 180/1U
Charpy Impact Unnotched  4.50 J/cm² 21.4 ft-lb/in² 50%RH; ISO 179/1eU
  5.00 J/cm² 23.8 ft-lb/in² DAM; ISO 179/1eU
   3.50 J/cm²
@Temperature -30.0 °C		 16.7 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 179/1eU
  4.00 J/cm²
@Temperature -30.0 °C		 19.0 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eU
Charpy Impact, Notched  0.400 J/cm² 1.90 ft-lb/in² DAM; ISO 179/1eA
  0.600 J/cm² 2.86 ft-lb/in² 50%RH; ISO 179/1eA
   0.300 J/cm²
@Temperature -30.0 °C		 1.43 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eA
  0.300 J/cm²
@Temperature -40.0 °C		 1.43 ft-lb/in²
@Temperature -40.0 °F		 DAM; ISO 179/1eA
  0.300 J/cm²
@Temperature -40.0 °C		 1.43 ft-lb/in²
@Temperature -40.0 °F		 50%RH; ISO 179/1eA
  0.400 J/cm²
@Temperature -30.0 °C		 1.90 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 179/1eA
Tensile Creep Modulus, 1 hour    1357.47 MPa
@Pressure 30.0 MPa,
Temperature 60.0 °C		 196885 psi
@Pressure 4350 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1367.54 MPa
@Pressure 25.0 MPa,
Temperature 60.0 °C		 198345 psi
@Pressure 3630 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1396.04 MPa
@Pressure 20.0 MPa,
Temperature 60.0 °C		 202479 psi
@Pressure 2900 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1485.15 MPa
@Pressure 15.0 MPa,
Temperature 60.0 °C		 215403 psi
@Pressure 2180 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1690 MPa
@Pressure 20.0 MPa,
Temperature 120 °C		 245000 psi
@Pressure 2900 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  1756.59 MPa
@Pressure 10.0 MPa,
Temperature 60.0 °C		 254772 psi
@Pressure 1450 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1803.94 MPa
@Pressure 15.0 MPa,
Temperature 120 °C		 261640 psi
@Pressure 2180 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  1980 MPa
@Pressure 10.0 MPa,
Temperature 120 °C		 287000 psi
@Pressure 1450 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  2200 MPa
@Pressure 5.00 MPa,
Temperature 120 °C		 319000 psi
@Pressure 725 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  2222.22 MPa
@Pressure 40.0 MPa,
Temperature 23.0 °C		 322306 psi
@Pressure 5800 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2287.69 MPa
@Pressure 35.0 MPa,
Temperature 23.0 °C		 331802 psi
@Pressure 5080 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2372.58 MPa
@Pressure 30.0 MPa,
Temperature 23.0 °C		 344114 psi
@Pressure 4350 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2380.95 MPa
@Pressure 5.00 MPa,
Temperature 60.0 °C		 345328 psi
@Pressure 725 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  2479.85 MPa
@Pressure 25.0 MPa,
Temperature 23.0 °C		 359673 psi
@Pressure 3630 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2612.48 MPa
@Pressure 20.0 MPa,
Temperature 23.0 °C		 378909 psi
@Pressure 2900 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2771.01 MPa
@Pressure 15.0 MPa,
Temperature 23.0 °C		 401902 psi
@Pressure 2180 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2941.18 MPa
@Pressure 10.0 MPa,
Temperature 23.0 °C		 426583 psi
@Pressure 1450 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  3065.13 MPa
@Pressure 5.00 MPa,
Temperature 23.0 °C		 444560 psi
@Pressure 725 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2300 MPa
@Time 3600 sec		 334000 psi
@Time 1.00 hour		 50%RH; ISO 899-1
Tensile Creep Modulus, 1000 hours    819.672 MPa
@Pressure 30.0 MPa,
Temperature 60.0 °C		 118884 psi
@Pressure 4350 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  856.583 MPa
@Pressure 25.0 MPa,
Temperature 60.0 °C		 124237 psi
@Pressure 3630 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  908.796 MPa
@Pressure 20.0 MPa,
Temperature 60.0 °C		 131810 psi
@Pressure 2900 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  980.392 MPa
@Pressure 15.0 MPa,
Temperature 60.0 °C		 142194 psi
@Pressure 2180 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1075.89 MPa
@Pressure 10.0 MPa,
Temperature 60.0 °C		 156045 psi
@Pressure 1450 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1190.48 MPa
@Pressure 5.00 MPa,
Temperature 60.0 °C		 172665 psi
@Pressure 725 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1420 MPa
@Pressure 20.0 MPa,
Temperature 120 °C		 206000 psi
@Pressure 2900 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  1531.07 MPa
@Pressure 15.0 MPa,
Temperature 120 °C		 222063 psi
@Pressure 2180 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  1532.57 MPa
@Pressure 40.0 MPa,
Temperature 23.0 °C		 222281 psi
@Pressure 5800 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1553.34 MPa
@Pressure 35.0 MPa,
Temperature 23.0 °C		 225293 psi
@Pressure 5080 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1583.84 MPa
@Pressure 30.0 MPa,
Temperature 23.0 °C		 229717 psi
@Pressure 4350 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1633.46 MPa
@Pressure 25.0 MPa,
Temperature 23.0 °C		 236914 psi
@Pressure 3630 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1710 MPa
@Pressure 10.0 MPa,
Temperature 120 °C		 248000 psi
@Pressure 1450 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  1724.14 MPa
@Pressure 20.0 MPa,
Temperature 23.0 °C		 250066 psi
@Pressure 2900 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1900.63 MPa
@Pressure 15.0 MPa,
Temperature 23.0 °C		 275664 psi
@Pressure 2180 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1953.12 MPa
@Pressure 5.00 MPa,
Temperature 120 °C		 283277 psi
@Pressure 725 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  2173.91 MPa
@Pressure 10.0 MPa,
Temperature 23.0 °C		 315300 psi
@Pressure 1450 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2416.28 MPa
@Pressure 5.00 MPa,
Temperature 23.0 °C		 350452 psi
@Pressure 725 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1500 MPa
@Time 3.60e+6 sec		 218000 psi
@Time 1000 hour		 50%RH; ISO 899-1
 
Electrical Properties Metric English Comments
Volume Resistivity  1.00e+9 ohm-cm 1.00e+9 ohm-cm 50%RH; IEC 60093
  1.00e+13 ohm-cm 1.00e+13 ohm-cm DAM; IEC 60093
Surface Resistance  3.00e+12 ohm 3.00e+12 ohm 50%RH; IEC 60093
Dielectric Constant    4.0
@Frequency 1.00e+6 Hz		 4.0
@Frequency 1.00e+6 Hz		 DAM; IEC 60250
  4.0
@Frequency 1.00e+6 Hz		 4.0
@Frequency 1.00e+6 Hz		 50%RH; IEC 60250
  4.0
@Frequency 100 Hz		 4.0
@Frequency 100 Hz		 DAM; IEC 60250
  7.0
@Frequency 100 Hz		 7.0
@Frequency 100 Hz		 50%RH; IEC 60250
Dielectric Strength  39.0 kV/mm 991 kV/in 50%RH; IEC 60243-1
  40.0 kV/mm 1020 kV/in DAM; IEC 60243-1
Dissipation Factor    0.010
@Frequency 1.00e+6 Hz		 0.010
@Frequency 1.00e+6 Hz		 DAM; IEC 60250
  0.010
@Frequency 100 Hz		 0.010
@Frequency 100 Hz		 DAM; IEC 60250
  0.020
@Frequency 100 Hz		 0.020
@Frequency 100 Hz		 50%RH; IEC 60250
  0.050
@Frequency 1.00e+6 Hz		 0.050
@Frequency 1.00e+6 Hz		 50%RH; IEC 60250
Comparative Tracking Index  475 V 475 V DAM; IEC 60112
 
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow  41.0 µm/m-°C 22.8 µin/in-°F DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow  62.0 µm/m-°C 34.4 µin/in-°F DAM; ISO 11359-1/-2
Specific Heat Capacity  2.10 J/g-°C 0.502 BTU/lb-°F  
Thermal Conductivity  0.250 W/m-K 1.74 BTU-in/hr-ft²-°F of melt
Melting Point  263 °C 505 °F DAM; 10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)  255 °C 491 °F DAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)  230 °C 446 °F DAM; ISO 75-1/-2
Glass Transition Temp, Tg  80.0 °C 176 °F DAM; 10°C/min; ISO 11357-1/-2
Flammability, UL94    HB
@Thickness 1.50 mm		 HB
@Thickness 0.0591 in		 DAM; IEC 60695-11-10
  HB
@Thickness 0.800 mm		 HB
@Thickness 0.0315 in		 DAM; IEC 60695-11-10
Flame Spread  40 mm/min
@Thickness 1.00 mm		 1.6 in/min
@Thickness 0.0394 in		 ISO 3795 (FMVSS 302)
Oxygen Index  24 % 24 % DAM; ISO 4589-1/-2
 
Descriptive Properties
Part Marking Code >PA66-(MD+GF)38< ISO 11469
Processing Injection Moulding  
Regional Availability Asia Pacific  
  North America  
  South and Central America  
Resin Identification PA66-(MD+GF)38  
Special characteristics Heat stabilised or stable to heat  
UL recognition UL DAM
 
熔化温度：260~290℃。对玻璃添加剂的产品为275~280℃。熔化温度应避免高于300℃。 模具温度：建议80℃。模具温度将影响结晶度，而结晶度将影响产品的物理特性。对于薄壁塑件，如果使用低于40℃的模具温度，则塑件的结晶度将随着时间而变化，为了保持塑件的几何稳定性，需要进行退火处理。
颗粒06
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生  
手  机：13501802636   
QQ    ：205730283  
邮 箱 ：205730283@qq.com 

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/news/

本文链接: http://www.su-jiao.com/news/show-25432.html

免责声明: 本文 PA66 22C NC010 Nylon66 具有优良耐磨性 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他资讯信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4