塑胶原料之家
  1. 首页
  2. 资讯
  3. 产品资讯
  4. PA66 80G14A NC010A 耐冲击

PA66 80G14A NC010A 耐冲击

PA66 80G14A NC010A PA66在聚酰胺材料中有较高的熔点。在产品设计时，一PA66的收缩率在1%~2%之间。 上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。 PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。 欢迎各位客户前来咨询： 联系人： 夏先生 手 机：13501802636 QQ ：205730283 邮 箱 ：205730283@qq.com
 PA66 80G14A NC010A 物理化学性：PA66塑胶原料为半透明或不透明乳白包或带黄色颗粒状结晶形聚合物，具有可塑性。密度（g/cm3） 1．10-1．14；拉伸强度(MPa) 60. 0-80．0；洛氏硬度118；熔点252℃；脆化温度-30℃；热分解温度大于350℃；连续耐热80-120℃；冲击强度（kJ/m2） 60-100；静弯曲强度(MPa) 1 00-120；马丁耐热(℃) 50-60；弯曲弹性模量 (MPa) 2000～3000；体积电阻率（Ωcm） 1.83×1015；平衡吸水率2．5%；介电常数 1．63。
 物性表：
Physical Properties Metric English Comments
Density  1.19 g/cc 0.0430 lb/in³ DAM; ISO 1183
Water Absorption  6.2 %
@Thickness 2.00 mm		 6.2 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Moisture Absorption  1.80 %
@Thickness 2.00 mm		 1.80 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Viscosity Test  137 cm³/g 137 cm³/g DAM; ISO 307 1157 1628
Linear Mold Shrinkage, Flow  0.0070 cm/cm 0.0070 in/in DAM; ISO 294-4 2577
Linear Mold Shrinkage, Transverse  0.0080 cm/cm 0.0080 in/in DAM; ISO 294-4 2577
 
Mechanical Properties Metric English Comments
Tensile Strength at Break  66.0 MPa 9570 psi 50%RH; ISO 527-1/-2
  108 MPa 15700 psi DAM; ISO 527-1/-2
Tensile Stress    3.00 MPa
@Strain 0.0960 %,
Time 3600 sec		 435 psi
@Strain 0.0960 %,
Time 1.00 hour		 50%RH; isochronous; ISO 11403-1 -2
  3.00 MPa
@Strain 0.103 %,
Time 36000 sec		 435 psi
@Strain 0.103 %,
Time 10.0 hour		 50%RH; isochronous; ISO 11403-1 -2
  3.00 MPa
@Strain 0.111 %,
Time 360000 sec		 435 psi
@Strain 0.111 %,
Time 100 hour		 50%RH; isochronous; ISO 11403-1 -2
  3.00 MPa
@Strain 0.130 %,
Time 3.60e+7 sec		 435 psi
@Strain 0.130 %,
Time 10000 hour		 50%RH; isochronous; ISO 11403-1 -2
  3.00 MPa
@Strain 0.121 %,
Time 3.60e+6 sec		 435 psi
@Strain 0.121 %,
Time 1000 hour		 50%RH; isochronous; ISO 11403-1 -2
  9.00 MPa
@Strain 0.349 %,
Time 360000 sec		 1310 psi
@Strain 0.349 %,
Time 100 hour		 50%RH; isochronous; ISO 11403-1 -2
  12.0 MPa
@Strain 0.443 %,
Time 36000 sec		 1740 psi
@Strain 0.443 %,
Time 10.0 hour		 50%RH; isochronous; ISO 11403-1 -2
  12.0 MPa
@Strain 0.403 %,
Time 3600 sec		 1740 psi
@Strain 0.403 %,
Time 1.00 hour		 50%RH; isochronous; ISO 11403-1 -2
  12.0 MPa
@Strain 0.528 %,
Time 3.60e+6 sec		 1740 psi
@Strain 0.528 %,
Time 1000 hour		 50%RH; isochronous; ISO 11403-1 -2
  12.0 MPa
@Strain 0.571 %,
Time 3.60e+7 sec		 1740 psi
@Strain 0.571 %,
Time 10000 hour		 50%RH; isochronous; ISO 11403-1 -2
Elongation at Break  3.8 % 3.8 % DAM; ISO 527-1/-2
  10 % 10 % 50%RH; ISO 527-1/-2
Tensile Modulus  3.40 GPa 493 ksi 50%RH; ISO 527-1/-2
  4.80 GPa 696 ksi DAM; ISO 527-1/-2
   1.844 GPa
@Temperature 120 °C		 267.5 ksi
@Temperature 248 °F		 50%RH; ISO 11403-1 -2
  1.979 GPa
@Temperature 120 °C		 287.0 ksi
@Temperature 248 °F		 DAM; ISO 11403-1 -2
  2.753 GPa
@Temperature 40.0 °C		 399.3 ksi
@Temperature 104 °F		 50%RH; ISO 11403-1 -2
  4.597 GPa
@Temperature 40.0 °C		 666.7 ksi
@Temperature 104 °F		 DAM; ISO 11403-1 -2
  5.598 GPa
@Temperature -40.0 °C		 811.9 ksi
@Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  6.113 GPa
@Temperature -40.0 °C		 886.6 ksi
@Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
Flexural Modulus  4.40 GPa 638 ksi DAM; ISO 178
Shear Modulus    0.253 GPa
@Temperature 160 °C		 36.7 ksi
@Temperature 320 °F		 DAM; Dynamic; ISO 11403-1 -2
  0.287 GPa
@Temperature 120 °C		 41.6 ksi
@Temperature 248 °F		 DAM; Dynamic; ISO 11403-1 -2
  0.486 GPa
@Temperature 70.0 °C		 70.5 ksi
@Temperature 158 °F		 DAM; Dynamic; ISO 11403-1 -2
  1.00 GPa
@Temperature 20.0 °C		 145 ksi
@Temperature 68.0 °F		 DAM; Dynamic; ISO 11403-1 -2
  1.08 GPa
@Temperature -20.0 °C		 157 ksi
@Temperature -4.00 °F		 DAM; Dynamic; ISO 11403-1 -2
  1.26 GPa
@Temperature -50.0 °C		 183 ksi
@Temperature -58.0 °F		 DAM; Dynamic; ISO 11403-1 -2
Izod Impact, Notched (ISO)  13.0 kJ/m² 6.19 ft-lb/in² DAM; ISO 180/1A
   6.00 kJ/m²
@Temperature -40.0 °C		 2.86 ft-lb/in²
@Temperature -40.0 °F		 DAM; ISO 180/1A
Charpy Impact Unnotched  7.00 J/cm² 33.3 ft-lb/in² DAM; ISO 179/1eU
  7.60 J/cm² 36.2 ft-lb/in² 50%RH; ISO 179/1eU
   7.10 J/cm²
@Temperature -30.0 °C		 33.8 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 179/1eU
  9.00 J/cm²
@Temperature -30.0 °C		 42.8 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eU
Charpy Impact, Notched  1.30 J/cm² 6.19 ft-lb/in² DAM; ISO 179/1eA
  1.70 J/cm² 8.09 ft-lb/in² 50%RH; ISO 179/1eA
  0.600 J/cm²
@Temperature -40.0 °C		 2.86 ft-lb/in²
@Temperature -40.0 °F		 50%RH; ISO 179/1eA
  0.700 J/cm²
@Temperature -30.0 °C		 3.33 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 179/1eA
  1.00 J/cm²
@Temperature -30.0 °C		 4.76 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eA
Tensile Creep Modulus, 1 hour    2594.03 MPa
@Pressure 20.0 MPa,
Temperature 23.0 °C		 376233 psi
@Pressure 2900 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2832.68 MPa
@Pressure 15.0 MPa,
Temperature 23.0 °C		 410846 psi
@Pressure 2180 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  3026.37 MPa
@Pressure 10.0 MPa,
Temperature 23.0 °C		 438939 psi
@Pressure 1450 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  3107.42 MPa
@Pressure 5.00 MPa,
Temperature 23.0 °C		 450694 psi
@Pressure 725 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  3100 MPa
@Time 3600 sec		 450000 psi
@Time 1.00 hour		 50%RH; ISO 899-1
Tensile Creep Modulus, 1000 hours    1923.08 MPa
@Pressure 20.0 MPa,
Temperature 23.0 °C		 278920 psi
@Pressure 2900 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2132.35 MPa
@Pressure 15.0 MPa,
Temperature 23.0 °C		 309272 psi
@Pressure 2180 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2334.17 MPa
@Pressure 10.0 MPa,
Temperature 23.0 °C		 338543 psi
@Pressure 1450 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2440.44 MPa
@Pressure 5.00 MPa,
Temperature 23.0 °C		 353957 psi
@Pressure 725 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2500 MPa
@Time 3.60e+6 sec		 363000 psi
@Time 1000 hour		 50%RH; ISO 899-1
 
Electrical Properties Metric English Comments
Volume Resistivity  1.00e+12 ohm-cm 1.00e+12 ohm-cm 50%RH; IEC 60093
  >= 1.00e+15 ohm-cm >= 1.00e+15 ohm-cm DAM; IEC 60093
Surface Resistance  1.00e+14 ohm 1.00e+14 ohm 50%RH; IEC 60093
Dielectric Constant    3.5
@Frequency 1.00e+6 Hz		 3.5
@Frequency 1.00e+6 Hz		 DAM; IEC 60250
  3.8
@Frequency 100 Hz		 3.8
@Frequency 100 Hz		 DAM; IEC 60250
  3.9
@Frequency 1.00e+6 Hz		 3.9
@Frequency 1.00e+6 Hz		 50%RH; IEC 60250
  7.3
@Frequency 100 Hz		 7.3
@Frequency 100 Hz		 50%RH; IEC 60250
Dielectric Strength  36.0 kV/mm 914 kV/in DAM; IEC 60243-1
  36.5 kV/mm 927 kV/in 50%RH; IEC 60243-1
Dissipation Factor    0.018
@Frequency 100 Hz		 0.018
@Frequency 100 Hz		 50%RH; IEC 60250
  0.027
@Frequency 100 Hz		 0.027
@Frequency 100 Hz		 DAM; IEC 60250
  0.058
@Frequency 1.00e+6 Hz		 0.058
@Frequency 1.00e+6 Hz		 DAM; IEC 60250
  0.058
@Frequency 1.00e+6 Hz		 0.058
@Frequency 1.00e+6 Hz		 50%RH; IEC 60250
Comparative Tracking Index  600 V 600 V DAM; IEC 60112
 
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow  40.0 µm/m-°C 22.2 µin/in-°F DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow  120 µm/m-°C 66.7 µin/in-°F DAM; ISO 11359-1/-2
Specific Heat Capacity  2.35 J/g-°C 0.562 BTU/lb-°F  
Thermal Conductivity  0.190 W/m-K 1.32 BTU-in/hr-ft²-°F of melt
Melting Point  263 °C 505 °F DAM; 10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)  258 °C 496 °F DAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)  240 °C 464 °F DAM; ISO 75-1/-2
Vicat Softening Point  215 °C 419 °F DAM; 50°C/h 50N; ISO 306
Flammability, UL94    HB
@Thickness 1.50 mm		 HB
@Thickness 0.0591 in		 DAM; IEC 60695-11-10
  HB
@Thickness 0.800 mm		 HB
@Thickness 0.0315 in		 DAM; IEC 60695-11-10
Flame Spread  44 mm/min
@Thickness 1.00 mm		 1.7 in/min
@Thickness 0.0394 in		 DS; Burning Rate; ISO 3795 (FMVSS 302)
 
Descriptive Properties
Additives Release agent  
Delivery form Pellets  
Eff. thermal diffusivity 8.09E-08 m²/s  
Part Marking Code >PA66-IGF14< ISO 11469
Processing Injection Moulding  
Regional Availability Asia Pacific  
  Europe  
  Global  
  Near East/Africa  
  North America  
  South and Central America  
Resin Identification PA66-IGF14
化学式：[-NH（CH2）6－NHCO(CH2)4CO]n－能耐酸、碱、大多数无机盐水溶液、卤代烷、烃类、酯类、酮类等腐蚀
H颗粒11pa66
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生  
手  机：13501802636   
QQ    ：205730283  
邮 箱 ：205730283@qq.com 

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/news/

本文链接: http://www.su-jiao.com/news/show-25525.html

免责声明: 本文 PA66 80G14A NC010A 耐冲击 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他资讯信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4