| 物性表： | |||||
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.34 g/cc | 0.0484 lb/in³ | DAM; ISO 1183 | ||
| Linear Mold Shrinkage, Flow | 0.0010 cm/cm | 0.0010 in/in | DAM; ISO 294-4 2577 | ||
| Linear Mold Shrinkage, Transverse | 0.0060 cm/cm | 0.0060 in/in | DAM; ISO 294-4 2577 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Rockwell M | 53 | 53 | 50%RH; ISO 2039-2 | ||
| 81 | 81 | DAM; ISO 2039-2 | |||
| Hardness, Rockwell R | 113 | 113 | 50%RH; ISO 2039-2 | ||
| 116 | 116 | DAM; ISO 2039-2 | |||
| Tensile Strength at Break | 115 MPa | 16700 psi | 50%RH; ISO 527-1/-2 | ||
| 150 MPa | 21800 psi | DAM; ISO 527-1/-2 | |||
| Elongation at Break | 4.0 % | 4.0 % | DAM; ISO 527-1/-2 | ||
| 8.6 % | 8.6 % | 50%RH; ISO 527-1/-2 | |||
| Tensile Modulus | 6.929 GPa | 1005 ksi | 50%RH; ISO 527-1/-2 | ||
| 9.00 GPa | 1310 ksi | DAM; ISO 527-1/-2 | |||
| Flexural Modulus | 5.60 GPa | 812 ksi | 50%RH; ISO 178 | ||
| 7.68 GPa | 1110 ksi | DAM; ISO 178 | |||
| Izod Impact, Notched (ISO) | 21.0 kJ/m² | 9.99 ft-lb/in² | DAM; ISO 180/1A | ||
| 23.0 kJ/m² | 10.9 ft-lb/in² | 50%RH; ISO 180/1A | |||
| 12.0 kJ/m² @Temperature -40.0 °C |
5.71 ft-lb/in² @Temperature -40.0 °F |
50%RH; ISO 180/1A | |||
| 15.0 kJ/m² @Temperature -40.0 °C |
7.14 ft-lb/in² @Temperature -40.0 °F |
DAM; ISO 180/1A | |||
| Charpy Impact, Notched | 2.00 J/cm² | 9.52 ft-lb/in² | 50%RH; ISO 179/1eA | ||
| 2.10 J/cm² | 9.99 ft-lb/in² | DAM; ISO 179/1eA | |||
| 1.00 J/cm² @Temperature -40.0 °C |
4.76 ft-lb/in² @Temperature -40.0 °F |
50%RH; ISO 179/1eA | |||
| 1.10 J/cm² @Temperature -40.0 °C |
5.23 ft-lb/in² @Temperature -40.0 °F |
DAM; ISO 179/1eA | |||
| Electrical Properties | Metric | English | Comments | ||
| Comparative Tracking Index | 600 V | 600 V | DAM; IEC 60112 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 15.0 µm/m-°C | 8.33 µin/in-°F | DAM; ISO 11359-1/-2 | ||
| CTE, linear, Transverse to Flow | 120 µm/m-°C | 66.7 µin/in-°F | DAM; ISO 11359-1/-2 | ||
| Melting Point | 250 °C | 482 °F | DAM; 10°C/min; ISO 11357-1/-3 | ||
| Deflection Temperature at 0.46 MPa (66 psi) | 247 °C | 477 °F | DAM; ISO 75-1/-2 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 222 °C | 432 °F | DAM; ISO 75-1/-2 | ||
| Flammability, UL94 | HB @Thickness 1.50 mm |
HB @Thickness 0.0591 in |
DAM; IEC 60695-11-10 | ||
| HB @Thickness 0.800 mm |
HB @Thickness 0.0315 in |
DAM; IEC 60695-11-10 | |||
| De |
|||||
| Delivery form | Pellets | ||||
| Part Marking Code | >PA66+PA6-IGF33< | ISO 11469 | |||
| Processing | Injection Moulding | ||||
| Regional Availability | North America | ||||
| South and Central America | |||||
| Resin Identification | PA66+PA6-IGF33 | ||||
透明或不透明乳白色结晶形聚合物，具有可塑性。密度1．15g/cm3。熔点252℃。脆化温度-30℃。热分解温度大于350℃。 连续耐热80-120℃,平衡吸水率2．5%。能耐酸、碱、大多数无机盐水溶液、卤代烷、烃类、酯类、酮类等腐蚀。
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生
手 机：13501802636
QQ ：205730283
邮 箱 ：205730283@qq.com