| 物性表： | |||
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.56 g/cc | 1.56 g/cc | ASTM D792 |
| Water Absorption | 0.60 % @Time 86400 sec |
0.60 % @Time 24.0 hour |
|
| Linear Mold Shrinkage | 0.0018 cm/cm | 0.0018 in/in | |
| Linear Mold Shrinkage, Transverse | 0.0022 cm/cm | 0.0022 in/in | |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength | 250.155 MPa | 36282.0 psi | ASTM D638 |
| Elongation at Break | 1.9 % | 1.9 % | ASTM D638 |
| Flexural Strength | 362.97 MPa | 52644 psi | ASTM D790 |
| Flexural Modulus | 14.715 GPa | 2134.2 ksi | ASTM D790 |
| Izod Impact, Notched | 3.24 J/cm @Temperature 23.0 °C |
6.06 ft-lb/in @Temperature 73.4 °F |
ASTM D256 |
| 3.24 J/cm @Temperature -30.0 °C |
6.06 ft-lb/in @Temperature -22.0 °F |
ASTM D256 | |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 1.8 MPa (264 psi) | 249 °C | 480 °F | ASTM D648 |
| Flammability, UL94 | HB | HB | |
| Processing Properties | Metric | English | Comments |
| Melt Temperature | 280 - 300 °C | 536 - 572 °F | |
| Mold Temperature | 90.0 - 120 °C | 194 - 248 °F | |
优点:
1、具高抗张强度；2、耐韧、耐冲击性特优；3、自润性、耐磨性佳、耐药品性优；4、低温特性佳；5、具自熄性；
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生
手 机：13501802636
QQ ：205730283
邮 箱 ：205730283@qq.com