PA6 B3EG3 15%玻璃、_产品资讯

PA6 B3EG3 塑胶原料为半透明或不透明乳白包或带黄色颗粒状结晶形聚合物，具有可塑性。密度（g/cm3） 1．10-1．14；拉伸强度(MPa) 60. 0-80．0；洛氏硬度118；熔点252℃；脆化温度-30℃；热分解温度大于350℃；连续耐热80-120℃；冲击强度（kJ/m2） 60-100；静弯曲强度(MPa) 1 00-120；马丁耐热(℃) 50-60；弯曲弹性模量 (MPa) 2000～3000；体积电阻率（Ωcm） 1.83×1015；平衡吸水率2．5%；介电常数 1．63。

颗粒样图：

、

应用：广泛用于制造机械、汽车、化学与电气装置的零件，如齿轮、滚子、滑轮、辊轴、泵体中叶轮、风扇叶片、高压密封围、阀座、垫片、衬套、各种把手、支撑架、电线包内层等。

上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。

PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。

欢迎各位客户前来咨询：

联系人：夏先生

手机：13501802636

QQ ：205730283

邮箱：205730283@qq.com

物性表:

Physical Properties	Metric	English	Comments

Density	1.23 g/cc	0.0444 lb/in³	ISO 1183
Water Absorption	7.7 - 8.3 %	7.7 - 8.3 %	Saturation; ISO 62
Moisture Absorption at Equilibrium	2.3 %	2.3 %	50% RH
	2.3 - 2.9 %	2.3 - 2.9 %	23°C; 50% RH; ISO 62
	7.7 %	7.7 %	Saturation
Viscosity Measurement	140	140	ISO 307
Linear Mold Shrinkage	0.0045 cm/cm	0.0045 in/in	restricted
Melt Flow	92.25 g/10 min @Load 5.00 kg, Temperature 275 °C	92.25 g/10 min @Load 11.0 lb, Temperature 527 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	103 MPa	14900 psi	ASTM D638
Tensile Strength, Yield	130 MPa	18900 psi	50 mm/min; ISO 527-1/-2
Elongation at Break	3.5 %	3.5 %	ASTM D638
Elongation at Yield	3.5 %	3.5 %	50 mm/min; ISO 527-1/-2
Modulus of Elasticity	5.80 GPa	841 ksi	ISO 527-1/-2
Flexural Strength	180 MPa	26100 psi	at max force; ISO 178
Flexural Modulus	5.20 GPa	754 ksi	ISO 178
Izod Impact, Notched (ISO)	6.00 kJ/m² @Temperature 23.0 °C	2.86 ft-lb/in² @Temperature 73.4 °F	ISO 180/A
Charpy Impact Unnotched	4.50 J/cm² @Temperature -30.0 °C	21.4 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eU
	4.80 J/cm² @Temperature -40.0 °C	22.8 ft-lb/in² @Temperature -40.0 °F	ASTM D256
	5.00 J/cm² @Temperature 23.0 °C	23.8 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eU
Charpy Impact, Notched	0.700 J/cm² @Temperature -30.0 °C	3.33 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eA
	0.800 J/cm² @Temperature 23.0 °C	3.81 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eA

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+13 ohm-cm	1.00e+13 ohm-cm	IEC 60093
Dielectric Constant	3.8 @Frequency 1.00 Hz	3.8 @Frequency 1.00 Hz	IEC 60250
Dissipation Factor	0.025 @Frequency 1.00e+6 Hz	0.025 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	550 V	550 V	Test solution A; IEC 60112

Thermal Properties	Metric	English	Comments
CTE, linear	20.0 µm/m-°C	11.1 µin/in-°F	ASTM E831
CTE, linear, Parallel to Flow	30.0 - 35.0 µm/m-°C @Temperature 23.0 - 80.0 °C	16.7 - 19.4 µin/in-°F @Temperature 73.4 - 176 °F	DIN 11359-1/-2
CTE, linear, Transverse to Flow	70.0 - 80.0 µm/m-°C @Temperature 23.0 - 80.0 °C	38.9 - 44.4 µin/in-°F @Temperature 73.4 - 176 °F	DIN 11359-1/-2
Specific Heat Capacity	1.60 J/g-°C	0.382 BTU/lb-°F
Thermal Conductivity	0.340 W/m-K	2.36 BTU-in/hr-ft²-°F	DIN 52612
Melting Point	220 °C	428 °F	DIN 53765
Maximum Service Temperature, Air	135 °C	275 °F	for 50% loss of tensile strength after 20000hr
	165 °C	329 °F	for 50% loss of tensile strength after 5000hr
	200 °C	392 °F
Deflection Temperature at 0.46 MPa (66 psi)	215 °C	419 °F	ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	190 °C	374 °F	ISO 75-1/-2
UL RTI, Electrical	120 °C @Thickness 1.50 mm	248 °F @Thickness 0.0591 in	746B
UL RTI, Mechanical with Impact	95.0 °C @Thickness 1.50 mm	203 °F @Thickness 0.0591 in	746B
UL RTI, Mechanical without Impact	130 °C @Thickness 1.50 mm	266 °F @Thickness 0.0591 in	746B
Flammability, UL94	HB @Thickness 1.60 mm	HB @Thickness 0.0630 in

Processing Properties	Metric	English	Comments
Melt Temperature	270 - 290 °C	518 - 554 °F	Injection-molding/Extrusion
Mold Temperature	80.0 - 90.0 °C	176 - 194 °F	Injection-molding
Dry Time	2 - 4 hour	2 - 4 hour

Descriptive Properties
Commercial Status	Europe and North America

PA6 B3EG3 15%玻璃 、

PA6 B3EG3 15%玻璃、