原料颗粒图：
、
、物性表：
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.36 g/cc | 1.36 g/cc | ASTM D792 | ||
| Water Absorption | 0.070 % @Time 86400 sec |
0.070 % @Time 24.0 hour |
ASTM D570 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength, Yield | 49.6 MPa | 7200 psi | ASTM D638 | ||
| Elongation at Break | 40 % | 40 % | ASTM D638 | ||
| Tensile Modulus | 2.62 GPa | 380 ksi | ASTM D638 | ||
| Flexural Modulus | 2.69 GPa @Temperature 22.8 °C |
390 ksi @Temperature 73.0 °F |
ASTM D790 | ||
| Izod Impact, Notched | 0.374 J/cm | 0.700 ft-lb/in | ASTM D256 | ||
| Coefficient of Friction, Dynamic | 0.11 | 0.11 | vs Steel; LNP EPALP-TB001 | ||
| Coefficient of Friction, Static | 0.080 | 0.080 | Steel; LNP EPALP-TB001 | ||
| K Factor (Wear Factor) | 38 | 38 | in5-min/ft-lbs/hr, at 2000 PV; LNP EPALP-TB001 | ||
| Limiting Pressure Velocity | 0.550 MPa-m/sec | 15700 psi-ft/min | LNP EPALP-TB003, at 100 ft/min | ||
| Thermal Properties | Metric | English | Comments | ||
| Maximum Service Temperature, Air | 105 °C | 221 °F | UL746B | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 90.6 °C | 195 °F | ASTM D648 | ||
| De |
|||||
| 3A Compliant | YES | ||||
| FDA Complaint | YES | ||||
| USDA Compliant | YES | ||||
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生
手 机：13501802636
QQ ：205730283
邮 箱 ：205730283@qq.com