类别：聚合物；热塑性；聚甲醛（POM）
材料说明：Hostaform®共聚级lu-02 XAP®是紫外线稳定材料显示减少粉饰标准紫外线缩醛档次类似lu-02。然而，lu-02xap Hostaform®®具有较低的挥发排放，一些汽车内饰要求。
减少光泽，低排放，耐紫外线等级
物性表：| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.39 g/cc | 0.0502 lb/in³ | ISO 1183 | ||
| Linear Mold Shrinkage, Flow | 0.019 cm/cm | 0.019 in/in | ISO 294-4 | ||
| Linear Mold Shrinkage, Transverse | 0.017 cm/cm | 0.017 in/in | ISO 294-4 | ||
| Melt Flow | 20 g/10 min @Load 2.16 kg, Temperature 190 °C |
20 g/10 min @Load 4.76 lb, Temperature 374 °F |
(MVR) cm³/10min; ISO 1133 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength, Yield | 56.0 MPa | 8120 psi | 50mm/min; ISO 527-2/1A | ||
| Elongation at Yield | 9.0 % | 9.0 % | 50mm/min; ISO 527-2/1A | ||
| Tensile Modulus | 2.40 GPa | 348 ksi | 1mm/min; ISO 527-2/1A | ||
| Flexural Modulus | 2.35 GPa | 341 ksi | ISO 178 | ||
| Charpy Impact, Notched | 0.350 J/cm² | 1.67 ft-lb/in² | ISO 179/1eA | ||
| Thermal Properties | Metric | English | Comments | ||
| Melting Point | 166 °C | 331 °F | 10°C/min; ISO 11357-1,-2,-3 | ||
| Deflection Temperature at 0.46 MPa (66 psi) | 152 °C | 306 °F | ISO 75-1, -2 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 90.0 °C | 194 °F | ISO 75-1, -2 | ||
| Processing Properties | Metric | English | Comments | ||
| Processing Temperature | 80.0 - 105 °C | 176 - 221 °F | Cavity temperature | ||
| Zone 1 | 170 - 175 °C | 338 - 347 °F | |||
| Zone 2 | 170 - 180 °C | 338 - 356 °F | |||
| Zone 3 | 175 - 185 °C | 347 - 365 °F | |||
| Zone 4 | 180 - 190 °C | 356 - 374 °F | |||
| Die Temperature | 185 - 195 °C | 365 - 383 °F | |||
| Melt Temperature | 180 - 195 °C | 356 - 383 °F | |||
| Drying Temperature | 80.0 - 100 °C | 176 - 212 °F | |||
| Dry Time | 3.00 hour | 3.00 hour | |||
| Injection Pressure | 60.0 - 120 MPa | 8700 - 17400 psi | |||
| Hold Pressure | 60.0 - 120 MPa | 8700 - 17400 psi | |||
| Back Pressure | 0.500 MPa | 72.5 psi | |||
| De |
|||||
| Injection molding | Yes | ||||
| Injection speed | slow | ||||
| Pre-drying | Predrying is required before processing to ensure a low gloss finish. | ||||
| Processing conditions | ISO 9988-2 | ||||
| Processing Notes | Use slow injection speed until material passes through gate, then increase. | ||||
上海松翰塑化科技有限公司！本公司承诺，假一赔百！所有产品都是原厂家，原包装一线独家营销！
我司所销售所有产品均为原厂原包，均可提供相关资料报告（如：物性表，MSDS报告，UL报告，COA报告，SGS报告，FDA等）！
如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告，请您通过电话或是QQ与我联系！
欢迎新老客户来电咨询;
联系人：李先生
联系电话；13636696005
联系QQ；1020580970
联系邮箱；1020580970@qq.com