| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.51 g/cc | 1.51 g/cc | ASTM D792 | ||
| Water Absorption | 0.18 % | 0.18 % | Immersion, 24hr; ASTM D570(2) | ||
| Water Absorption at Saturation | 0.90 % | 0.90 % | Immersion; ASTM D570(2) | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Rockwell M | 114 | 114 | ASTM D785 | ||
| Hardness, Rockwell R | 127 | 127 | ASTM D785 | ||
| Hardness, Shore D | 86 | 86 | ASTM D2240 | ||
| Tensile Strength | 117 MPa | 17000 psi | ASTM D638 | ||
| Elongation at Break | 3.0 % | 3.0 % | ASTM D638 | ||
| Tensile Modulus | 5.52 GPa | 800 ksi | ASTM D638 | ||
| Flexural Strength | 186 MPa | 27000 psi | ASTM D790 | ||
| Flexural Modulus | 5.86 GPa | 850 ksi | ASTM D790 | ||
| Compressive Strength | 221 MPa | 32000 psi | 10% Def.; ASTM D695 | ||
| Compressive Modulus | 4.31 GPa | 625 ksi | ASTM D695 | ||
| Izod Impact, Notched | 0.534 J/cm | 1.00 ft-lb/in | ASTM D256 Type A | ||
| Electrical Properties | Metric | English | Comments | ||
| Surface Resistivity per Square | >= 1.00e+13 ohm | >= 1.00e+13 ohm | EOS/ESD S11.11 | ||
| Dielectric Constant | 3.7 @Frequency 1e+6 Hz |
3.7 @Frequency 1e+6 Hz |
ASTM D150 | ||
| Dielectric Strength | 30.3 kV/mm | 770 kV/in | Short Term; ASTM D149 | ||
| Dissipation Factor | 0.0015 @Frequency 1e+6 Hz |
0.0015 @Frequency 1e+6 Hz |
ASTM D150 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear | 19.8 µm/m-°C @Temperature -40.0 - 149 °C |
11.0 µin/in-°F @Temperature -40.0 - 300 °F |
ASTM E831 | ||
| Thermal Conductivity | 0.225 W/m-K | 1.56 BTU-in/hr-ft²-°F | ASTM F433 | ||
| Maximum Service Temperature, Air | 171 °C | 340 °F | Long Term | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 210 °C | 410 °F | ASTM D648 | ||
| Glass Transition Temp, Tg | 210 °C | 410 °F | ASTM D3418 | ||
| Flammability, UL94 | V-0 | V-0 | 1/8 inch (Estimated Rating) | ||
| Compliance Properties | Metric | English | Comments | ||
| 3A-Dairy | No | No | |||
| Canada AG | No | No | |||
| FDA | No | No | |||
| NSF | No | No | |||
| USDA | No | No | |||
| USP Class VI | No | No | |||
| Chemical Resistance Properties | Metric | English | Comments | ||
| Acids, Strong (pH 1-3) | Unacceptable | Unacceptable | |||
| Acids, Weak | Acceptable | Acceptable | |||
| Alcohols | Acceptable | Acceptable | |||
| Alkalies, Strong (pH 11-14) | Unacceptable | Unacceptable | |||
| Alkalies, Weak | Acceptable | Acceptable | |||
| Chlorinated Solvents | Unacceptable | Unacceptable | |||
| Conductive / Static Dissipative | No | No | |||
| Continuous Sunlight | Acceptable | Acceptable | |||
| Hot Water / Steam | Acceptable | Acceptable | |||
| Hydrocarbons - Aliphatic | Limited | Limited | |||
| Hydrocarbons - Aromatic | Unacceptable | Unacceptable | |||
| Inorganic Salt Solutions | Acceptable | Acceptable | |||
| Ketones, Esters | Unacceptable | Unacceptable | |||
| De |
|||||
| Machinability | 7 | 1-10, 1=Easier to Machine |
|||
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生
手 机：13501802636 021 51131842
QQ ：205730283
邮 箱 ：205730283@qq.com
PEI U2300 图：
