塑胶原料之家
  1. 首页
  2. 资讯
  3. 产品资讯
  4. 杜邦高性能聚合物PA PLS 95g50dh2 BK261

杜邦高性能聚合物PA PLS 95g50dh2 BK261

杜邦高性能聚合物®PLS 95g50dh2 BK261 Zytel尼龙6 类别：聚合物；热塑性塑料；尼龙；尼龙6；尼龙6，50%玻璃纤维填充 材料说明：50%玻璃增强热稳定聚酰胺 Zytel pls95g50dh2 bk261is高流量50%的玻璃纤维增强PA尼龙树脂只使用杜邦提供卓越的耐热防护技术
物性表：

 
Physical Properties Metric English Comments
Density  1.59 g/cc 0.0574 lb/in³ DAM; ISO 1183
Water Absorption  1.3 %
@Thickness 2.00 mm		 1.3 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Moisture Absorption  1.30 %
@Thickness 2.00 mm		 1.30 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Linear Mold Shrinkage, Flow  0.0030 cm/cm 0.0030 in/in DAM; ISO 294-4 2577
Linear Mold Shrinkage, Transverse  0.0060 cm/cm 0.0060 in/in DAM; ISO 294-4 2577
 
Mechanical Properties Metric English Comments
Tensile Strength at Break  175 MPa 25400 psi 50%RH; ISO 527-1/-2
  247 MPa 35800 psi DAM; ISO 527-1/-2
Tensile Stress   13.89 MPa
@Strain 0.230 %,
Temperature 150 °C		 2015 psi
@Strain 0.230 %,
Temperature 302 °F		 50%RH; ISO 11403-1 -2
  23.81 MPa
@Strain 0.290 %,
Temperature 90.0 °C		 3453 psi
@Strain 0.290 %,
Temperature 194 °F		 50%RH; ISO 11403-1 -2
  25.3 MPa
@Strain 0.280 %,
Temperature 90.0 °C		 3670 psi
@Strain 0.280 %,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  25.84 MPa
@Strain 0.240 %,
Temperature 40.0 °C		 3748 psi
@Strain 0.240 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
       
  30.95 MPa
@Strain 0.230 %,
Temperature 23.0 °C		 4489 psi
@Strain 0.230 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
       
  55.12 MPa
@Strain 1.89 %,
Temperature 150 °C		 7994 psi
@Strain 1.89 %,
Temperature 302 °F		 50%RH; ISO 11403-1 -2
       
  69.9 MPa
@Strain 3.39 %,
Temperature 180 °C		 10100 psi
@Strain 3.39 %,
Temperature 356 °F		 DAM; ISO 11403-1 -2
  72.42 MPa
@Strain 2.24 %,
Temperature 150 °C		 10500 psi
@Strain 2.24 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  75.57 MPa
@Strain 1.75 %,
Temperature 90.0 °C		 10960 psi
@Strain 1.75 %,
Temperature 194 °F		 50%RH; ISO 11403-1 -2
  79.73 MPa
@Strain 0.530 %,
Temperature 40.0 °C		 11560 psi
@Strain 0.530 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  83.11 MPa
@Strain 3.32 %,
Temperature 150 °C		 12050 psi
@Strain 3.32 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  83.55 MPa
@Strain 7.15 %,
Temperature 150 °C		 12120 psi
@Strain 7.15 %,
Temperature 302 °F		 50%RH; ISO 11403-1 -2
  83.98 MPa
@Strain 6.94 %,
Temperature 180 °C		 12180 psi
@Strain 6.94 %,
Temperature 356 °F		 DAM; ISO 11403-1 -2
       
  96.96 MPa
@Strain 0.650 %,
Temperature 0.000 °C		 14060 psi
@Strain 0.650 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  97.6 MPa
@Strain 0.980 %,
Temperature 23.0 °C		 14200 psi
@Strain 0.980 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  99.98 MPa
@Strain 7.22 %,
Temperature 150 °C		 14500 psi
@Strain 7.22 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  107.12 MPa
@Strain 2.18 %,
Temperature 90.0 °C		 15536 psi
@Strain 2.18 %,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  110.72 MPa
@Strain 6.08 %,
Temperature 90.0 °C		 16059 psi
@Strain 6.08 %,
Temperature 194 °F		 50%RH; ISO 11403-1 -2
  111.51 MPa
@Strain 1.83 %,
Temperature 40.0 °C		 16173 psi
@Strain 1.83 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  114.67 MPa
@Strain 0.750 %,
Temperature -20.0 °C		 16632 psi
@Strain 0.750 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  117.29 MPa
@Strain 0.840 %,
Temperature 40.0 °C		 17012 psi
@Strain 0.840 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  128.35 MPa
@Strain 1.56 %,
Temperature 23.0 °C		 18616 psi
@Strain 1.56 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  136.48 MPa
@Strain 0.990 %,
Temperature 0.000 °C		 19795 psi
@Strain 0.990 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
       
  14.0 GPa
@Temperature -50.0 °C		 2030 ksi
@Temperature -58.0 °F		 DAM; Dynamic; ISO 11403-1 -2
  14.0 GPa
@Temperature -20.0 °C		 2030 ksi
@Temperature -4.00 °F		 DAM; Dynamic; ISO 11403-1 -2
  14.0 GPa
@Temperature 30.0 °C		 2030 ksi
@Temperature 86.0 °F		 DAM; Dynamic; ISO 11403-1 -2
  17.002 GPa
@Temperature -20.0 °C		 2465.9 ksi
@Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  17.132 GPa
@Temperature -20.0 °C		 2484.8 ksi
@Temperature -4.00 °F		 DAM; ISO 11403-1 -2
Flexural Strength  374 MPa 54200 psi DAM; ISO 178
Flexural Modulus  15.7 GPa 2280 ksi DAM; ISO 178
Secant Modulus   1.14 GPa
@Strain 6.03 %,
Temperature 200 °C		 166 ksi
@Strain 6.03 %,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  1.44 GPa
@Strain 4.41 %,
Temperature 200 °C		 208 ksi
@Strain 4.41 %,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  1.88 GPa
@Strain 2.96 %,
Temperature 200 °C		 273 ksi
@Strain 2.96 %,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  2.79 GPa
@Strain 1.56 %,
Temperature 200 °C		 404 ksi
@Strain 1.56 %,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  3.85 GPa
@Strain 3.72 %,
Temperature 40.0 °C		 559 ksi
@Strain 3.72 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  4.325 GPa
@Strain 0.560 %,
Temperature 200 °C		 627.3 ksi
@Strain 0.560 %,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  5.24 GPa
@Strain 3.24 %,
Temperature 23.0 °C		 761 ksi
@Strain 3.24 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  5.27 GPa
@Strain 2.37 %,
Temperature 40.0 °C		 765 ksi
@Strain 2.37 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  6.29 GPa
@Strain 3.40 %,
Temperature 40.0 °C		 912 ksi
@Strain 3.40 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  7.0637 GPa
@Strain 1.35 %,
Temperature 40.0 °C		 1024.5 ksi
@Strain 1.35 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  7.167 GPa
@Strain 2.03 %,
Temperature 23.0 °C		 1040 ksi
@Strain 2.03 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  8.52 GPa
@Strain 2.92 %,
Temperature 23.0 °C		 1240 ksi
@Strain 2.92 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  9.11 GPa
@Strain 2.16 %,
Temperature 40.0 °C		 1320 ksi
@Strain 2.16 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  9.36 GPa
@Strain 0.610 %,
Temperature 40.0 °C		 1360 ksi
@Strain 0.610 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  9.36 GPa
@Strain 1.16 %,
Temperature 23.0 °C		 1360 ksi
@Strain 1.16 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  9.50 GPa
@Strain 2.29 %,
Temperature 0.000 °C		 1380 ksi
@Strain 2.29 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  10.7 GPa
@Strain 2.43 %,
Temperature -20.0 °C		 1560 ksi
@Strain 2.43 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  10.8 GPa
@Strain 0.240 %,
Temperature 40.0 °C		 1560 ksi
@Strain 0.240 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  11.3 GPa
@Strain 1.98 %,
Temperature 23.0 °C		 1650 ksi
@Strain 1.98 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  11.7 GPa
@Strain 1.55 %,
Temperature 0.000 °C		 1700 ksi
@Strain 1.55 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  11.8 GPa
@Strain 1.37 %,
Temperature 40.0 °C		 1710 ksi
@Strain 1.37 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  11.9 GPa
@Strain 0.520 %,
Temperature 23.0 °C		 1720 ksi
@Strain 0.520 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  12.0 GPa
@Strain 2.14 %,
Temperature 0.000 °C		 1750 ksi
@Strain 2.14 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  12.4 GPa
@Strain 1.77 %,
Temperature -20.0 °C		 1800 ksi
@Strain 1.77 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  13.1 GPa
@Strain 1.92 %,
Temperature -20.0 °C		 1900 ksi
@Strain 1.92 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  13.5 GPa
@Strain 0.230 %,
Temperature 23.0 °C		 1950 ksi
@Strain 0.230 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  13.7 GPa
@Strain 1.35 %,
Temperature 23.0 °C		 1990 ksi
@Strain 1.35 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  13.8 GPa
@Strain 0.990 %,
Temperature 0.000 °C		 2000 ksi
@Strain 0.990 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  13.9 GPa
@Strain 1.53 %,
Temperature 0.000 °C		 2020 ksi
@Strain 1.53 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  14.0 GPa
@Strain 0.840 %,
Temperature 40.0 °C		 2030 ksi
@Strain 0.840 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  14.3 GPa
@Strain 1.11 %,
Temperature -20.0 °C		 2080 ksi
@Strain 1.11 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  14.9 GPa
@Strain 0.650 %,
Temperature 0.000 °C		 2160 ksi
@Strain 0.650 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  15.0 GPa
@Strain 0.530 %,
Temperature 40.0 °C		 2180 ksi
@Strain 0.530 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  15.1 GPa
@Strain 0.990 %,
Temperature 23.0 °C		 2190 ksi
@Strain 0.990 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  15.186 GPa
@Strain 1.14 %,
Temperature 0.000 °C		 2202.6 ksi
@Strain 1.14 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  15.3 GPa
@Strain 0.750 %,
Temperature -20.0 °C		 2220 ksi
@Strain 0.750 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  15.3 GPa
@Strain 1.12 %,
Temperature -20.0 °C		 2220 ksi
@Strain 1.12 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
Charpy Impact Unnotched  9.00 J/cm² 42.8 ft-lb/in² 50%RH; ISO 179/1eU
  9.50 J/cm² 45.2 ft-lb/in² DAM; ISO 179/1eU
  8.00 J/cm²
@Temperature -30.0 °C		 38.1 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eU
  8.50 J/cm²
@Temperature -30.0 °C		 40.4 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 179/1eU
Charpy Impact, Notched  1.60 J/cm² 7.61 ft-lb/in² DAM; ISO 179/1eA
  1.80 J/cm²
@Temperature -30.0 °C		 8.57 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eA
Tensile Creep Modulus, 1 hour   4120 MPa
@Pressure 7.00 MPa,
Temperature 200 °C		 597000 psi
@Pressure 1020 psi,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  4120 MPa
@Pressure 1.00 MPa,
Temperature 200 °C		 597000 psi
@Pressure 145 psi,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  4120 MPa
@Pressure 2.00 MPa,
Temperature 200 °C		 597000 psi
@Pressure 290 psi,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  4120 MPa
@Pressure 3.00 MPa,
Temperature 200 °C		 597000 psi
@Pressure 435 psi,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  4120 MPa
@Pressure 4.00 MPa,
Temperature 200 °C		 597000 psi
@Pressure 580 psi,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  4120 MPa
@Pressure 5.00 MPa,
Temperature 200 °C		 597000 psi
@Pressure 725 psi,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  4120 MPa
@Pressure 6.00 MPa,
Temperature 200 °C		 597000 psi
@Pressure 870 psi,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  7730 MPa
@Pressure 5.00 MPa,
Temperature 100 °C		 1.12e+6 psi
@Pressure 725 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  7730 MPa
@Pressure 10.0 MPa,
Temperature 100 °C		 1.12e+6 psi
@Pressure 1450 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  7730 MPa
@Pressure 15.0 MPa,
Temperature 100 °C		 1.12e+6 psi
@Pressure 2180 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  7730 MPa
@Pressure 20.0 MPa,
Temperature 100 °C		 1.12e+6 psi
@Pressure 2900 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  7730 MPa
@Pressure 25.0 MPa,
Temperature 100 °C		 1.12e+6 psi
@Pressure 3630 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  7730 MPa
@Pressure 30.0 MPa,
Temperature 100 °C		 1.12e+6 psi
@Pressure 4350 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  10000 MPa
@Pressure 5.00 MPa,
Temperature 23.0 °C		 1.45e+6 psi
@Pressure 725 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  10000 MPa
@Pressure 10.0 MPa,
Temperature 23.0 °C		 1.45e+6 psi
@Pressure 1450 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  10000 MPa
@Pressure 15.0 MPa,
Temperature 23.0 °C		 1.45e+6 psi
@Pressure 2180 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  10000 MPa
@Pressure 20.0 MPa,
Temperature 23.0 °C		 1.45e+6 psi
@Pressure 2900 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  10000 MPa
@Pressure 25.0 MPa,
Temperature 23.0 °C		 1.45e+6 psi
@Pressure 3630 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  10000 MPa
@Pressure 30.0 MPa,
Temperature 23.0 °C		 1.45e+6 psi
@Pressure 4350 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
Tensile Creep Modulus, 1000 hours   3180 MPa
@Pressure 7.00 MPa,
Temperature 200 °C		 461000 psi
@Pressure 1020 psi,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  3180 MPa
@Pressure 1.00 MPa,
Temperature 200 °C		 461000 psi
@Pressure 145 psi,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  3180 MPa
@Pressure 2.00 MPa,
Temperature 200 °C		 461000 psi
@Pressure 290 psi,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  3180 MPa
@Pressure 3.00 MPa,
Temperature 200 °C		 461000 psi
@Pressure 435 psi,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  3180 MPa
@Pressure 4.00 MPa,
Temperature 200 °C		 461000 psi
@Pressure 580 psi,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  3180 MPa
@Pressure 5.00 MPa,
Temperature 200 °C		 461000 psi
@Pressure 725 psi,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  3180 MPa
@Pressure 6.00 MPa,
Temperature 200 °C		 461000 psi
@Pressure 870 psi,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  6390 MPa
@Pressure 5.00 MPa,
Temperature 100 °C		 927000 psi
@Pressure 725 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  6390 MPa
@Pressure 10.0 MPa,
Temperature 100 °C		 927000 psi
@Pressure 1450 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  6390 MPa
@Pressure 15.0 MPa,
Temperature 100 °C		 927000 psi
@Pressure 2180 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  6390 MPa
@Pressure 20.0 MPa,
Temperature 100 °C		 927000 psi
@Pressure 2900 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  6390 MPa
@Pressure 25.0 MPa,
Temperature 100 °C		 927000 psi
@Pressure 3630 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  6390 MPa
@Pressure 30.0 MPa,
Temperature 100 °C		 927000 psi
@Pressure 4350 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  6670 MPa
@Pressure 5.00 MPa,
Temperature 23.0 °C		 967000 psi
@Pressure 725 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  6670 MPa
@Pressure 10.0 MPa,
Temperature 23.0 °C		 967000 psi
@Pressure 1450 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  6670 MPa
@Pressure 15.0 MPa,
Temperature 23.0 °C		 967000 psi
@Pressure 2180 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  6670 MPa
@Pressure 20.0 MPa,
Temperature 23.0 °C		 967000 psi
@Pressure 2900 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  6670 MPa
@Pressure 25.0 MPa,
Temperature 23.0 °C		 967000 psi
@Pressure 3630 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  6670 MPa
@Pressure 30.0 MPa,
Temperature 23.0 °C		 967000 psi
@Pressure 4350 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
 
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow  10.0 µm/m-°C 5.56 µin/in-°F DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow  85.0 µm/m-°C 47.2 µin/in-°F DAM; ISO 11359-1/-2
Melting Point  265 °C 509 °F DAM; 10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)  263 °C 505 °F DAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)  254 °C 489 °F DAM; ISO 75-1/-2
Flammability, UL94  HB
@Thickness 1.50 mm		 HB
@Thickness 0.0591 in		 DAM; IEC 60695-11-10
 
Descriptive Properties
Additives Release agent  
Delivery form Pellets  
Part Marking Code >PA-GF50< ISO 11469
Processing Injection Moulding  
Regional Availability Asia Pacific  
  Europe  
  Global  
  Near East/Africa  
  North America  
  South and Central America  
Resin Identification PA-GF50  
Special characteristics Heat stabilised or stable to heat
图：

上海松翰塑化科技有限公司！本公司承诺，假一赔百！所有产品都是原厂家，原包装一线独家营销！
我司所销售所有产品均为原厂原包，均可提供相关资料报告（如：物性表，MSDS报告，UL报告，COA报告，SGS报告，FDA等）！
主要销售：PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告，请您通过电话或是QQ与我联系！
欢迎新老客户来电或QQ咨询：
联系人：李先生
联系电话；13636696005
联系QQ；1020580970
联系邮箱；1020580970@qq.com

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/news/

本文链接: http://www.su-jiao.com/news/show-39664.html

免责声明: 本文 杜邦高性能聚合物PA PLS 95g50dh2 BK261 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他资讯信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4