添加剂: 脱模
特性: 符合 ECO,良好的流动性
机构评级: EU Eco
加工方法: 注射成型
多点数据: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Elastic Modulus vs Temperature (ASTM D4065),Flexural DMA (ASTM D4065),Pressure-Volume-Temperature (PVT - Zoller Method),Shear DMA (ASTM D4065),Specific Heat vs. Temperature (ASTM D3417),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 无缺口悬臂梁冲击 1300 J/m ASTM D4812
- 维卡软化温度 219 °C ASTM D1525
- RTI Imp 170 °C UL 746
- 螺杆转速 rpm
- 吸水率 ASTM D570
- 维卡软化温度 219 °C ASTM D1525
- 落锤冲击 33.9 J ASTM D3029
- 比重 1.27 g/cm³ ASTM D792
- 无缺口悬臂梁冲击 1300 J/m ASTM D4812
- 背压 MPa