特性: 光泽，低,抗紫外线性能良好
用途: 汽车内部零件
加工方法: 注射成型
多点数据: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Flexural DMA (ASTM D4065),Instrumented Impact (Energy) (ASTM D3763),Instrumented Impact (Load) (ASTM D3763),Pressure-Volume-Temperature (PVT - Zoller Method),Shear DMA (ASTM D4065),Specific Heat vs. Temperature (ASTM D3417),Tensile Creep (ASTM D2990),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 高电弧燃烧指数(HAI) PLC 0 UL 746
- 装有测量仪表的落镖冲击 ASTM D3763
- 干燥时间，最大 8.0 hr
- 高电弧燃烧指数(HAI) PLC 0 UL 746
- 悬壁梁缺口冲击强度 ASTM D256
- 料筒前部温度 °C
- RTI Imp 60.0 °C UL 746
- 相比耐漏电起痕指数(CTI) PLC 2 UL 746
- 螺杆转速 rpm
- 比重 1.13 g/cm³ ASTM D792