特性: 可加工性，良好,通用
用途: 把手,泵件,通用,文具
加工方法: 注射成型
多点数据: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Elastic Modulus vs Temperature (ASTM D4065),Flexural DMA (ASTM D4065),Instrumented Impact (Energy) (ASTM D3763),Instrumented Impact (Load) (ASTM D3763),Shear DMA (ASTM D4065),Specific Heat vs. Temperature (ASTM D3417),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 背压 MPa
- 螺杆转速 rpm
- 加工（熔体）温度 °C
- 体积电阻率 ohms·cm ASTM D257
- UL 阻燃等级 HB UL 94
- 伸长率 200 % ASTM D638
- 特定体积 0.770 cm³/g ASTM D792
- 抗张强度 51.7 MPa ASTM D638
- 热丝引燃 (HWI) PLC 3 UL 746
- 无缺口悬臂梁冲击 1600 J/m ASTM D4812