特性: 超高抗冲击性,低温韧性,高光
加工方法: 注射成型
多点数据: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Flexural DMA (ASTM D4065),Pressure-Volume-Temperature (PVT - Zoller Method),Shear DMA (ASTM D4065),Specific Heat vs. Temperature (ASTM D3417),Tensile Creep (ASTM D2990),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 模具温度 °C
- 抗张强度
- 维卡软化温度
- 抗张强度
- 背压 MPa
- 悬壁梁缺口冲击强度
- RTI Imp 60.0 °C UL 746
- 背压 MPa
- 相比耐漏电起痕指数(CTI) PLC 0 UL 746
- 比重 1.04 g/cm³ ASTM D792