RamTal PM7013G2|POM-GF10|Polyram物性表报告及物性特性介绍,RamTal PM7013G2|POM-GF10|Polyram注塑参数详情-塑料物性表查询网

加工/物理特性	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
熔体流动指数(Melt Flow Index)	9	g/10min	ASTM D 1238
温度(Temperature)	190	°C	-
负载(Load)	2.16	kg	-
模具收缩(Mold Shrinkage) (MD)	0.011	mm/mm	ASTM D 955
密度(Density) (73°F)	1460	kg/m³	ASTM D 792
吸水率(Water Absorption) (24hr)	0.2	%	ASTM D 570

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
抗拉强度(Tensile Strength) at Yield	70	MPa	ASTM D 638
断裂伸长率(Elongation at Break)	3	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	3000	MPa	ASTM D 790
抗弯强度(Flexural Strength)	100	MPa	ASTM D 790
悬臂梁式冲击切口 (1/8 in)	0.048	kJ/m	ASTM D 256

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
熔化温度(Melting 温度(Temperature))	165	°C	ASTM D 3418

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
体积电阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	1E12	Ohm	IEC 60093
电气强度(Electric strength)	20	kV/mm	IEC 60243-1

CharacteristicsProcessingInjection MoldingDelivery formPelletsSpecial CharacteristicsU.V. stabilized or stable to weatherFeaturesLow OdorRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.