Valox 4012G|PBT-GF10|沙特基础物性表报告及物性特性介绍,Valox 4012G|PBT-GF10|沙特基础注塑参数详情-塑料物性表查询网

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
熔体体积流动速率(Melt volume-flow rate) (MVR)	9	cm³/10min	ISO 1133
温度(Temperature)	250	°C	ISO 1133
负载(Load)	1.2	kg	ISO 1133

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
拉伸模量(Tensile Modulus)	4500	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	72	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	4	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	45	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	45	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	7	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	6	kJ/m²	ISO 179/1eA
弯曲弹性模量(Flexural modulus) (23°C)	3500	MPa	ISO 178
悬臂梁式冲击切口 (23°C)	6	kJ/m²	ISO 180/1A
悬臂梁式冲击切口	6	kJ/m²	ISO 180/1A
温度(Temperature)	-30	°C	ISO 180/1A
悬臂梁式冲击无切口(Izod Impact unnotched) (23°C)	37	kJ/m²	ISO 180/1U
球压痕硬度(Ball indentation hardness)	117	MPa	ISO 2039-1
ASTM数据(ASTM Data)
拉伸模量(Tensile Modulus)	4600	MPa	ASTM D 638
抗拉强度(Tensile Strength) at Yield	75	MPa	ASTM D 638
抗拉强度(Tensile Strength) at Break	75	MPa	ASTM D 638
屈服伸长率(Elongation at Yield)	3	%	ASTM D 638
断裂伸长率(Elongation at Break)	3	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	3940	MPa	ASTM D 790
悬臂梁式冲击切口 (1/8 in)	0.074	kJ/m	ASTM D 256
悬臂梁式冲击切口 (Low-温度(Temperature))	0.074	kJ/m	ASTM D 256
温度(Temperature)	-30	°C	ASTM D 256

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	170	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	215	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	205	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	60	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	80	E-6/K	ISO 11359-1/-2
ASTM数据(ASTM Data)
UL 94 阻燃等级(Flame rating)	HB	-	UL 94
厚度测试(Thickness tested)	1.6	mm	-
热膨胀系数(Coefficient of Thermal Expansion) (MD)	60	E-6/K	ASTM D 696
热膨胀系数(Coefficient of Thermal Expansion) (TD)	80	E-6/K	ASTM D 696
DTUL @ 264 psi	175	°C	ASTM D 648
Vicat 温度(Temperature)	205	°C	ASTM D 1525

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
相对介电常数(Relative permittivity) (1MHz)	3	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	140	E-4	IEC 60250
体积电阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	>1E15	Ohm	IEC 60093
电气强度(Electric strength)	25	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	250	-	IEC 60112

CharacteristicsProcessingInjection MoldingFeaturesDuctileRegional AvailabilityNorth America, South and Central AmericaDisclaimerCopyright M-Base .