VESTAMID® D22 nc (nf)|PA612|Evonik Industries物性表报告及物性特性介绍,VESTAMID® D22 nc (nf)|PA612|Evonik Industries注塑参数详情-塑料物性表查询网

Product TextsVESTAMID® D22 ncFDA Paragraph 177.1500.

流变性能(Rheological properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔体体积流动速率(Melt volume-flow rate) (MVR)	60 / *	cm³/10min	ISO 1133
温度(Temperature)	275 / *	°C	ISO 1133
负载(Load)	5 / *	kg	ISO 1133

机械性能(机械性能(Mechanical properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	2200 / 1700	MPa	ISO 527-1/-2
屈服应力(Yield stress)	60 / 49	MPa	ISO 527-1/-2
屈服应变(Yield strain)	4 / 20	%	ISO 527-1/-2
断裂拉伸应变(Nominal strain at break)	>50 / >50	%	ISO 527-1/-2
Tensile creep modulus (1h)	* / 1800	MPa	ISO 899-1
Tensile creep modulus (1000h)	* / 600	MPa	ISO 899-1
简支梁冲击强度(Charpy impact strength) (+23°C)	N / N	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	N / N	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	7 / 10	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	7 / 6	kJ/m²	ISO 179/1eA

热性能(热性能(Thermal properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	215 / *	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	60 / *	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	140 / *	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	180 / *	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	130 / *	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	120 / *	E-6/K	ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	1.6 / *	mm	IEC 60695-11-10
燃烧性(球压痕硬度(Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	3.2 / *	mm	IEC 60695-11-10

电气性能(Electrical properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (100Hz)	3.8 / 5	-	IEC 60250
相对介电常数(Relative permittivity) (1MHz)	3 / 3.7	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)	230 / 650	E-4	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	290 / 550	E-4	IEC 60250
体积电阻率(Volume resistivity)	>1E13 / 3E12	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	* / >1E15	Ohm	IEC 60093
电气强度(Electric strength)	27 / 27	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	* / 600	-	IEC 60112

其他属性(Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	2.7 / *	%	Sim. to ISO 62
吸湿性(Humidity absorption)	1 / *	%	Sim. to ISO 62
密度(Density)	1060 / 1060	kg/m³	ISO 1183

材料特殊性能(Material specific properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
粘数(Viscosity number)	220 / *	cm³/g	ISO 307, 1157, 1628

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Injection Molding, melt temperature	270	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294
Injection Molding, pressure at hold	70	MPa	ISO 294

Diagrams1 % The drying time is dependentAt a drying temperature of 80°C we recommend, depending on the waterFresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plasticizer during 1 % The drying time is dependentAt a drying temperature of 80°C we recommend, depending on the waterFresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plasticizer during 1 % The drying time is dependentAt a drying temperature of 80°C we recommend, depending on the waterFresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plasticizer during .