XANTAR® RX 2124|PC FR|Mitsubishi EP物性表报告及物性特性介绍,XANTAR® RX 2124|PC FR|Mitsubishi EP注塑参数详情-塑料物性表查询网

Product TextsLow Viscosity, Flame Retardant, Molding Release, UV Stabilized2	kg	ISO 1133
成型收缩(Molding shrinkage) (parallel)	0.6	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	2300	MPa	ISO 527-1/-2
屈服应力(Yield stress)	60	MPa	ISO 527-1/-2
屈服应变(Yield strain)	6	%	ISO 527-1/-2
断裂拉伸应变(Nominal strain at break)	>50	%	ISO 527-1/-2

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	130	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	148	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	65	E-6/K	ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at thickness h	V-0	class	IEC 60695-11-10
厚度测试(Thickness tested)	2.0	mm	IEC 60695-11-10
Oxygen index	35	%	ISO 4589-1/-2

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (100Hz)	3	-	IEC 60250
相对介电常数(Relative permittivity) (1MHz)	2.9	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)	6.6	E-4	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	92	E-4	IEC 60250
体积电阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	>1E15	Ohm	IEC 60093
电气强度(Electric strength)	29	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	225	-	IEC 60112

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.35	%	Sim. to ISO 62
密度(Density)	1200	kg/m³	ISO 1183

材料特殊性能(Material specific properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
粘数(Viscosity number)	55	cm³/g	ISO 307, 1157, 1628

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density) of melt	1010	kg/m³	-
熔体热导率(Thermal conductivity of melt)	0.24	W/(m K)	-
规格的热容融化(Spec. heat capacity of melt)	1710	J/(kg K)	-
Eff. thermal diffusivity	1.40E-7	m²/s	-
喷射温度(Ejection temperature)	131	°C	-

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Injection Molding, melt temperature	300	°C	ISO 294
Injection Molding, mold temperature	90	°C	ISO 10724

CharacteristicsProcessingInjection Molding, Blow MoldingDelivery formPelletsAdditivesRelease agentSpecial CharacteristicsFlame retardant, Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or stable to heat, TransparentRegional AvailabilityEuropeOther text informationInjection moldingInjection Molding RecommendationsDisclaimerCopyright M-Base .
[/td][/tr][/table]