- 熔体流动速率 [g/10min]: 7.0
- 密度 [g/cm3]: 1.22
- 缺口冲击强度: 0.534
- 拉伸强度 [MPa]: 22.0
- 弯曲模量 [MPa]: 4.400
- 硬度: 42.0
- 热变形温度 [℃]: 123.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.22 g/cc | 0.0441 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.0040 cm/cm | 0.0040 in/in | MD; ASTM D955 |
| Melt Flow | 7.0 g/10 min | 7.0 g/10 min | ASTM D1238 |
| Ash | 40 % | 40 % | ASTM D2584 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell R | 42 | 42 | ASTM D785 |
| Tensile Strength at Break | 21.0 MPa | 3050 psi | ASTM D638 |
| Tensile Strength, Yield | 22.0 MPa | 3190 psi | ASTM D638 |
| Elongation at Break | 5.0 % | 5.0 % | ASTM D638 |
| Elongation at Yield | 2.0 % | 2.0 % | ASTM D638 |
| Tensile Modulus | 3.40 GPa | 493 ksi | ASTM D638 |
| Flexural Strength | 31.0 MPa | 4500 psi | ASTM D790 |
| Flexural Modulus | 4.400 GPa | 638.1 ksi | ASTM D790 |
| Izod Impact, Notched | 0.534 J/cm | 1.00 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 0.46 MPa (66 psi) | 123 °C | 253 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 72.8 °C | 163 °F | |