Albis Plastics Albis Polypropylene A 12 H-GK20/GF20 C , 20% Glass Bead/20% Glass Fiber物性表参数

Albis Plastics Albis Polypropylene A 12 H-GK20/GF20 C , 20% Glass Bead/20% Glass Fiber

Albis Plastics Albis Polypropylene A 12 H-GK20/GF20 C , 20% Glass Bead/20% Glass Fiber 物性表: Albis Plastics Albis Polypropylene A 12 H-GK20/GF20 C , 20% Glass Bead/20% Glass Fiber物性表及特性介绍,Albis Plastics Albis Polypropylene A 12 H-GK20/GF20 C , 20% Glass Bead/20% Glass Fiber注塑参数详情,如需Albis Plastics Albis Polypropylene A 12 H-GK20/GF20 C , 20% Glass Bead/20% Glass Fiber下载, 可到相关下载区下载

熔体流动速率 [g/10min]: 6.0
密度 [g/cm3]: 1.2
缺口冲击强度: 0.64
拉伸强度 [MPa]: 50.3
断裂伸长率 [%]: 75.2

Physical Properties	Metric	English	Comments

Density	1.20 g/cc	0.0434 lb/in³	ASTM D792
Melt Flow	6.0 g/10 min	6.0 g/10 min	ASTM D1238

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	50.3 MPa	7300 psi	ASTM D638
Elongation at Break	3.0 %	3.0 %	ASTM D638
Modulus of Elasticity	4.50 GPa	653 ksi	ASTM D638
Flexural Yield Strength	75.2 MPa	10900 psi	ASTM D790
Izod Impact, Notched	0.640 J/cm	1.20 ft-lb/in	ASTM D256

Thermal Properties	Metric	English	Comments
Deflection Temperature at 1.8 MPa (264 psi)	140 °C	284 °F	ASTM D648
Vicat Softening Point	125 °C	257 °F	(VST/B/50); ASTM D1525

Processing Properties	Metric	English	Comments
Melt Temperature	218 - 302 °C	424 - 576 °F	Injection
Mold Temperature	18.0 - 71.0 °C	64.4 - 160 °F

关键词:
供应
PP
Albis Plastics Albis Polypropylene A 12 H-GK20/GF20 C
20% Glass Bead/20% Glass Fiber

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-31334.html

免责声明: 本文 Albis Plastics Albis Polypropylene A 12 H-GK20/GF20 C , 20% Glass Bead/20% Glass Fiber 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息