Parker Chomerics ParPHorm® S1936-45 Non-Conductive Form-in-Place Gaskets物性表参数

Parker Chomerics ParPHorm® S1936-45 Non-Conductive Form-in-Place Gaskets

Parker Chomerics ParPHorm® S1936-45 Non-Conductive Form-in-Place Gaskets 物性表: Parker Chomerics ParPHorm® S1936-45 Non-Conductive Form-in-Place Gaskets物性表及特性介绍,Parker Chomerics ParPHorm® S1936-45 Non-Conductive Form-in-Place Gaskets注塑参数详情,如需Parker Chomerics ParPHorm® S1936-45 Non-Conductive Form-in-Place Gaskets下载, 可到相关下载区下载

Physical Properties	Metric	English	Comments

Specific Gravity	1.06 g/cc	1.06 g/cc	ASTM D297

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	45	45	ASTM D2240
Tensile Strength	>= 4.67 MPa	>= 677 psi	ASTM D412
Elongation at Break	404 %	404 %	ASTM D412
Compression Set	7.0 % @Temperature 25.0 °C, Time 7.20e+6 sec	7.0 % @Temperature 77.0 °F, Time 2000 hour	ASTM D395
	9.0 % @Temperature 70.0 °C, Time 252000 sec	9.0 % @Temperature 158 °F, Time 70.0 hour	ASTM D395
	26 % @Temperature 100 °C, Time 252000 sec	26 % @Temperature 212 °F, Time 70.0 hour	25% deflection; ASTM D395
	32 % @Temperature 70.0 °C, Time 7.20e+6 sec	32 % @Temperature 158 °F, Time 2000 hour	ASTM D395

Processing Properties	Metric	English	Comments
Cure Time	1800 min @Temperature 140 °C	30.0 hour @Temperature 284 °F	Tack Free Time
	1800 min @Temperature 140 °C	30.0 hour @Temperature 284 °F	Handling Time
	1800 min @Temperature 140 °C	30.0 hour @Temperature 284 °F	Full Cure

Descriptive Properties
Color	Light Gray
Resin System	Silicone

关键词:
供应
粘合剂，密封剂和涂料
Parker Chomerics ParPHorm® S1936-45 Non-Conductive Form-in-Place Gaskets

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-32087.html

免责声明: 本文 Parker Chomerics ParPHorm® S1936-45 Non-Conductive Form-in-Place Gaskets 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络