| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Viscosity | 190000 cP | 190000 cP | A Component; Spindle #7; speed 10 rpm; ASTM D1824 |
| 200000 cP | 200000 cP | B Component; Spindle #7; speed 10 rpm; ASTM D1824 | |
| Chemical Properties | Metric | English | Comments |
| Ionic Impurities - Na (Sodium) | 15 ppm | 15 ppm | Hydrolyzable |
| Ionic Impurities - K (Potassium) | 5.0 ppm | 5.0 ppm | Hydrolyzable |
| Ionic Impurities - Cl (Chloride) | 15 ppm | 15 ppm | Hydrolyzable |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore D | 95 | 95 | Cured property; ASTM D2240 |
| Adhesive Bond Strength | 12.4 MPa | 1800 psi | Al-to-Al Lap Shear; Cured property; ASTM D1002 |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 7.50e+14 ohm-cm | 7.50e+14 ohm-cm | Cured property; ASTM D257 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 27.0 µm/m-°C @Temperature 20.0 °C | 15.0 µin/in-°F @Temperature 68.0 °F | Cured property; alpha 1; Perkin Elmer TMS-2 |
| 95.0 µm/m-°C @Temperature 20.0 °C | 52.8 µin/in-°F @Temperature 68.0 °F | Cured property; alpha 2; Perkin Elmer TMS-2 | |
| Thermal Conductivity | 1.21 W/m-K | 8.41 BTU-in/hr-ft²-°F | COLORA |
| Glass Transition Temp, Tg | 145 °C | 293 °F | Cured property; Perkin Elmer TMS-2 |
| Flash Point | >= 125 °C | >= 257 °F | A Component; ASTM D92 |
| >= 125 °C | >= 257 °F | B Component; ASTM D92 | |
