| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.37 g/cc | 1.37 g/cc | |||
| Solids Content | 42.1 % | 42.1 % | by weight | ||
| 49.2 % | 49.2 % | by volume | |||
| Volatile Organic Compounds (VOC) Content | 407 g/l | 407 g/l | |||
| Viscosity | 300 - 500 cP | 300 - 500 cP | |||
| Thickness | 25.4 microns | 1.00 mil | recommended dry film thickness | ||
| 51.6 microns | 2.03 mil | estimated wet film thickness | |||
| Storage Temperature | 4.44 - 32.2 °C | 40.0 - 90.0 °F | |||
| Thermal Properties | Metric | English | Comments | ||
| Maximum Service Temperature, Air | 316 °C | 600 °F | |||
| Flash Point | 46.1 °C | 115 °F | |||
| Processing Properties | Metric | English | Comments | ||
| Processing Temperature | 10.0 - 48.9 °C | 50.0 - 120 °F | Application Temperature | ||
| Dry Time | 1.00 - 2.00 hour | 1.00 - 2.00 hour | Touch | ||
| 2.00 - 4.00 hour | 2.00 - 4.00 hour | Handling | |||
| 1.0 - 24.0 hour | 1.0 - 24.0 hour | Recoat | |||
| Cure Time | 60.0 min | 1.00 hour | at 450°F; Adequate ventilation is required when curing these products. Outgassing will occur above 300°F and cease after 750°F. An additional 30 minutes is required at the highest service temperature if service temperature is below 750°F. | ||
| >= 60.0 min | >= 1.00 hour | Air Set prior to curing | |||
| Shelf Life | 12.0 Month | 12.0 Month | |||
| Descriptive Properties | |||||
| Dry Film Coverage ft2/gal | 789.7 | at 1 mil | |||
| Thinner | Water | ||||
