- 密度 [g/cm3]: 1.44
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.44 g/cc | 0.0520 lb/in³ | Silicone Property; Arlon SQA-TMS-024 | ||
| Thickness | 76.2 microns | 3.00 mil | Interleave | ||
| 127 microns | 5.00 mil | Overall; Arlon SQA-TMS-003 | |||
| 127 microns | 5.00 mil | Side 1; Arlon SQA-TMS-003 | |||
| 127 microns | 5.00 mil | Carrier; Arlon SQA-TMS-003 | |||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore A | 75 | 75 | Silicone Property; ASTM D2240 | ||
| Tensile Strength | 7.453 MPa | 1081 psi | Silicone Property; ASTM D412 | ||
| Elongation at Break | 83 % | 83 % | Silicone Property; ASTM D412 | ||
| Tear Strength | 7.19 kN/m | 41.0 pli | Die B, Silicone Property; ASTM D624 | ||
| Electrical Properties | Metric | English | Comments | ||
| Dielectric Strength | 51.81 kV/mm | 1316 kV/in | ASTM D149 | ||
| Thermal Properties | Metric | English | Comments | ||
| Maximum Service Temperature, Air | 232 °C | 450 °F | |||
| Minimum Service Temperature, Air | -56.7 °C | -70.0 °F | |||
| Processing Properties | Metric | English | Comments | ||
| Cure Time | 120 min @Temperature 204 °C | 2.00 hour @Temperature 400 °F | Recommended Postcure Cycle | ||
| 15.0 min @Pressure 0.345 MPa, Temperature 177 °C | 0.250 hour @Pressure 50.0 psi, Temperature 350 °F | Recommended Cure Cycle | |||
| Shelf Life | 6.00 Month @Temperature 21.1 °C | 6.00 Month @Temperature 70.0 °F | From date of manufacture | ||
| Descriptive Properties | |||||
| Color | Clear | Carrier | |||
| Light Gray | |||||
| Fuel Resistance | 0.118 | Fuel CM85, ASTM D471(tested at 65°C for 48 hr) | |||
| 0.139 | Fuel A, ASTM D471(tested at 20°C for 24 hr) | ||||
| 0.269 | Fuel C, ASTM D471(tested at 65°C for 48 hr) | ||||
| Total Product Weight (oz/yd2) | 8.5 | Arlon SQA-TMS-025 | |||