Arlon Thermavac® 0.060" (1.524 mm) Cured Silicone Vacuum Bagging (10502R060)物性表参数

Arlon Thermavac® 0.060" (1.524 mm) Cured Silicone Vacuum Bagging (10502R060)

Arlon Thermavac® 0.060" (1.524 mm) Cured Silicone Vacuum Bagging (10502R060) 物性表: Arlon Thermavac® 0.060" (1.524 mm) Cured Silicone Vacuum Bagging (10502R060)物性表及特性介绍,Arlon Thermavac® 0.060" (1.524 mm) Cured Silicone Vacuum Bagging (10502R060)注塑参数详情,如需Arlon Thermavac® 0.060" (1.524 mm) Cured Silicone Vacuum Bagging (10502R060)下载, 可到相关下载区下载

弯曲强度 [MPa]: 7.47

Mechanical Properties	Metric	English	Comments

Hardness, Shore A	50 - 60	50 - 60
Tensile Strength, Ultimate	7.47 - 9.13 MPa	1080 - 1320 psi
Elongation at Break	540 - 660 %	540 - 660 %
100% Modulus	0.00172 GPa	0.249 ksi	Average
Tear Strength	>= 43.8 kN/m	>= 250 pli
Compression Set	28 %	28 %	after post cure

Electrical Properties	Metric	English	Comments
Dielectric Strength	>= 15.75 kV/mm	>= 400.0 kV/in

Thermal Properties	Metric	English	Comments
Maximum Service Temperature, Air	232 °C	450 °F
Minimum Service Temperature, Air	-56.6 °C	-69.9 °F

关键词:
供应
硅胶
Arlon Thermavac® 0.060" (1.524 mm) Cured Silicone Vacuum Bagging (10502R060)

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-34563.html

免责声明: 本文 Arlon Thermavac® 0.060" (1.524 mm) Cured Silicone Vacuum Bagging (10502R060) 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息