Sumitomo Bakelite Durez® 153 Phenolic, Injection Grade

Sumitomo Bakelite Durez® 153 Phenolic, Injection Grade 物性表: Sumitomo Bakelite Durez® 153 Phenolic, Injection Grade物性表及特性介绍,Sumitomo Bakelite Durez® 153 Phenolic, Injection Grade注塑参数详情,如需Sumitomo Bakelite Durez® 153 Phenolic, Injection Grade下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.5
  • 吸水率 [%]: 0.4
  • 弯曲强度 [MPa]: 62.0
 
Physical PropertiesMetricEnglishComments
Density 1.50 g/cc0.0542 lb/in³ASTM D792
Apparent Bulk Density 0.600 g/cc0.0217 lb/in³ASTM D1895
Water Absorption 0.40 %0.40 %ASTM D570
Linear Mold Shrinkage 0.011 cm/cm0.011 in/inASTM D955
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength, Ultimate 62.0 MPa8990 psiASTM D638
Tensile Modulus 11.0 GPa1600 ksiASTM D638
Flexural Strength 83.0 MPa12000 psi
Compressive Strength 186 MPa27000 psiASTM D695
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 1.00e+12 ohm-cm1.00e+12 ohm-cmASTM D257
Dielectric Constant 5.1
@Frequency 1e+6 Hz
5.1
@Frequency 1e+6 Hz
ASTM D150
Dielectric Strength 10.8 kV/mm274 kV/inStep by step; ASTM D149
 13.8 kV/mm351 kV/inShort Time; ASTM D149
Dissipation Factor 0.050
@Frequency 1e+6 Hz
0.050
@Frequency 1e+6 Hz
ASTM D150
Comparative Tracking Index 225 V225 VIEC Tracking Index
 
Thermal PropertiesMetricEnglishComments
Maximum Service Temperature, Air 155 °C311 °FUL temperature Index
Deflection Temperature at 1.8 MPa (264 psi) 177 °C351 °FASTM D648
Flammability, UL94  V-1
@Thickness 1.00 mm
V-1
@Thickness 0.0394 in
 V-0
@Thickness 1.50 mm
V-0
@Thickness 0.0591 in

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-34750.html

免责声明: 本文 Sumitomo Bakelite Durez® 153 Phenolic, Injection Grade 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4