- 吸水率 [%]: 0.5
- 缺口冲击强度: 0.214
- 弯曲强度 [MPa]: 48.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.45 g/cc | 1.45 g/cc | ASTM D792 |
| Bulk Density | 0.580 g/cc | 0.0210 lb/in³ | ASTM D1895 |
| Water Absorption | 0.50 % | 0.50 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0090 cm/cm | 0.0090 in/in | ASTM D6289 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 48.0 MPa | 6960 psi | ASTM D638 |
| Tensile Modulus | 6.90 GPa | 1000 ksi | ASTM D638 |
| Flexural Strength | 76.0 MPa | 11000 psi | ASTM D790 |
| Compressive Strength | 207 MPa | 30000 psi | ASTM D695 |
| Izod Impact, Notched | 0.214 J/cm | 0.401 ft-lb/in | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | ASTM D257 |
| Dielectric Constant | 6.5 @Frequency 1.00e+6 Hz | 6.5 @Frequency 1.00e+6 Hz | ASTM D150 |
| Dielectric Strength | 8.86 kV/mm | 225 kV/in | Step by Step; ASTM D149 |
| 12.2 kV/mm | 310 kV/in | Short Time; ASTM D149 | |
| Dissipation Factor | 0.080 @Frequency 1.00e+6 Hz | 0.080 @Frequency 1.00e+6 Hz | ASTM D150 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 150 °C @Thickness 3.00 mm | 302 °F @Thickness 0.118 in | |
| Deflection Temperature at 1.8 MPa (264 psi) | 177 °C | 351 °F | ASTM D648 |
| Flammability, UL94 | HB @Thickness 1.50 mm | HB @Thickness 0.0591 in | |
| HB @Thickness 3.00 mm | HB @Thickness 0.118 in | ||
| V-0 @Thickness 6.00 mm | V-0 @Thickness 0.236 in | ||