| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 3.45 - 3.95 g/cc | 3.45 - 3.95 g/cc | ASTM D792 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore A | 57 - 73 | 57 - 73 | ASTM D2240 | ||
| Tensile Strength at Break | >= 1.21 MPa | >= 175 psi | ASTM D412 | ||
| Elongation at Break | >= 75 % | >= 75 % | ASTM D412 | ||
| Compression Set | <= 32 % @Temperature 100 °C, Time 252000 sec | <= 32 % @Temperature 212 °F, Time 70.0 hour | ASTM D395 Method B | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 0.0040 ohm-cm | 0.0040 ohm-cm | CEPS-0002 | ||
| Shielding Effectiveness | >= 100 dB @Frequency 1.00e+8 Hz | >= 100 dB @Frequency 1.00e+8 Hz | E Field; CHO-TM-TP08 | ||
| >= 100 dB @Frequency 5.00e+8 Hz | >= 100 dB @Frequency 5.00e+8 Hz | E Field; CHO-TM-TP08 | |||
| >= 100 dB @Frequency 2.00e+9 Hz | >= 100 dB @Frequency 2.00e+9 Hz | Plane Wave; CHO-TM-TP08 | |||
| >= 100 dB @Frequency 1.00e+10 Hz | >= 100 dB @Frequency 1.00e+10 Hz | Plane Wave; CHO-TM-TP08 | |||
| Thermal Properties | Metric | English | Comments | ||
| Maximum Service Temperature, Air | 125 °C | 257 °F | |||
| Minimum Service Temperature, Air | -65.0 °C | -85.0 °F | Flex TR10; ASTM D1329 | ||
| Descriptive Properties | |||||
| Binder | Silicone | ||||
| Filler | Ag/Cu | ||||
| Heat Aging | <.01 ohm-cm | CEPS-0002 | |||
