- 吸水率 [%]: 0.16
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Water Absorption | 0.16 % @Temperature 25.0 °C, Time 86400 sec | 0.16 % @Temperature 77.0 °F, Time 24.0 hour | ASTM D570 | ||
| Loss On Ignition | <= 0.10 % @Temperature 125 °C, Time 605000 sec | <= 0.10 % @Temperature 257 °F, Time 168 hour | |||
| Viscosity | 60 cP @Temperature 25.0 °C | 60 cP @Temperature 77.0 °F | Hardener; STM 1 | ||
| 4400 cP @Temperature 25.0 °C | 4400 cP @Temperature 77.0 °F | Mixed; STM 1 | |||
| 11000 cP @Temperature 25.0 °C | 11000 cP @Temperature 77.0 °F | Resin; STM 1 | |||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore A | 25 - 30 | 25 - 30 | ASTM D2240 | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.06e+15 ohm-cm | 1.06e+15 ohm-cm | ASTM D257 | ||
| Dielectric Constant | 4.4 @Frequency 1.00e+6 Hz, Temperature 25.0 °C | 4.4 @Frequency 1.00e+6 Hz, Temperature 77.0 °F | ASTM D150 | ||
| Dielectric Strength | >= 19.7 kV/mm | >= 500 kV/in | ASTM D149 | ||
| Dissipation Factor | 0.0448 @Frequency 1.00e+6 Hz, Temperature 25.0 °C | 0.0448 @Frequency 1.00e+6 Hz, Temperature 77.0 °F | ASTM D150 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear | 191.7 µm/m-°C | 106.5 µin/in-°F | ASTM D3386 | ||
| Thermal Conductivity | 0.300 W/m-K | 2.08 BTU-in/hr-ft²-°F | |||
| Maximum Service Temperature, Air | 130 °C | 266 °F | |||
| Glass Transition Temp, Tg | -68.0 °C | -90.4 °F | ASTM D3386 | ||
| Processing Properties | Metric | English | Comments | ||
| Cure Time | 180 - 240 min @Temperature 66.0 °C | 3.00 - 4.00 hour @Temperature 151 °F | Full | ||
| 1440 min @Temperature 25.0 °C | 24.0 hour @Temperature 77.0 °F | Initial | |||
| 4320 - 5760 min @Temperature 25.0 °C | 72.0 - 96.0 hour @Temperature 77.0 °F | Full | |||
| Pot Life | 60 - 90 min @Temperature 25.0 °C | 60 - 90 min @Temperature 77.0 °F | |||
| Gel Time | 60.0 min @Temperature 66.0 °C | 60.0 min @Temperature 151 °F | |||
| Shelf Life | 6.00 Month @Temperature 25.0 °C | 6.00 Month @Temperature 77.0 °F | |||
| Descriptive Properties | |||||
| Appearance | Amber (w/fluorescent yellow die) | Hardener | |||
| Black | Mixed | ||||
| Black | Resin | ||||
| Mix Ratio | 100:15 | by weight | |||
| 5:1 | by volume | ||||