TSE Industries Millathane® HT High Temperature-Resistant Millable Polyester Polyurethane with 70 PHR

TSE Industries Millathane® HT High Temperature-Resistant Millable Polyester Polyurethane with 70 PHR 物性表: TSE Industries Millathane® HT High Temperature-Resistant Millable Polyester Polyurethane with 70 PHR物性表及特性介绍,TSE Industries Millathane® HT High Temperature-Resistant Millable Polyester Polyurethane with 70 PHR注塑参数详情,如需TSE Industries Millathane® HT High Temperature-Resistant Millable Polyester Polyurethane with 70 PHR下载, 可到相关下载区下载

拉伸强度 [MPa]: 19.5

Mechanical Properties	Metric	English	Comments

Hardness, Shore A	90	90
Tensile Strength, Yield	19.5 MPa	2830 psi
Elongation at Yield	226 %	226 %
100% Modulus	0.01474 GPa	2.138 ksi
200% Modulus	0.01925 GPa	2.792 ksi
Tear Strength	53.4 kN/m	305 pli	Die C
Taber Abrasion, mg/1000 Cycles	0.26	0.26	H-18, mg loss/rev
Compression Set	62 % @Temperature 70.0 °C, Time 79200 sec	62 % @Temperature 158 °F, Time 22.0 hour

Processing Properties	Metric	English	Comments
Cure Time	20.0 min @Temperature 149 °C	0.333 hour @Temperature 300 °F

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-37294.html

免责声明: 本文 TSE Industries Millathane® HT High Temperature-Resistant Millable Polyester Polyurethane with 70 PHR 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。