BASF Ultradur B 4300 G2 LS High Speed BK15045 10% Glass Filled PBT物性表参数

BASF Ultradur B 4300 G2 LS High Speed BK15045 10% Glass Filled PBT

BASF Ultradur B 4300 G2 LS High Speed BK15045 10% Glass Filled PBT 物性表: BASF Ultradur B 4300 G2 LS High Speed BK15045 10% Glass Filled PBT物性表及特性介绍,BASF Ultradur B 4300 G2 LS High Speed BK15045 10% Glass Filled PBT注塑参数详情,如需BASF Ultradur B 4300 G2 LS High Speed BK15045 10% Glass Filled PBT下载, 可到相关下载区下载

熔体流动速率 [g/10min]: 35.0
密度 [g/cm3]: 1.38
弯曲强度 [MPa]: 85.0
热变形温度 [℃]: 215.0

Physical Properties	Metric	English	Comments

Density	1.38 g/cc	0.0499 lb/in³	ISO 1183
Viscosity Test	104 cm³/g	104 cm³/g	Viscosity number
Melt Flow	35 g/10 min @Load 2.16 kg, Temperature 250 °C	35 g/10 min @Load 4.76 lb, Temperature 482 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	85.0 MPa	12300 psi	5mm/min; ISO 527
Elongation at Break	3.6 %	3.6 %	5mm/min; ISO 527
Tensile Modulus	4.56 GPa	661 ksi	1mm/min; ISO 527

Thermal Properties	Metric	English	Comments
Melting Point	223 °C	433 °F	10 K/min
Deflection Temperature at 0.46 MPa (66 psi)	215 °C	419 °F	ISO 75
Deflection Temperature at 1.8 MPa (264 psi)	184 °C	363 °F	ISO 75

Descriptive Properties
Color	BK15045
Commercial Status	Active America
Impact Modified	No
Primary Processing Technique	Injection Molding

关键词:
PBT
供应
BASF Ultradur B 4300 G2 LS High Speed BK15045 10% Glass Filled PBT

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-37891.html

免责声明: 本文 BASF Ultradur B 4300 G2 LS High Speed BK15045 10% Glass Filled PBT 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络