Chevron Phillips MarFlex® 7120X Hexene Linear Low Density Polyethylene, Blown and Cast Film物性表参数

Chevron Phillips MarFlex® 7120X Hexene Linear Low Density Polyethylene, Blown and Cast Film

Chevron Phillips MarFlex® 7120X Hexene Linear Low Density Polyethylene, Blown and Cast Film 物性表: Chevron Phillips MarFlex® 7120X Hexene Linear Low Density Polyethylene, Blown and Cast Film物性表及特性介绍,Chevron Phillips MarFlex® 7120X Hexene Linear Low Density Polyethylene, Blown and Cast Film注塑参数详情,如需Chevron Phillips MarFlex® 7120X Hexene Linear Low Density Polyethylene, Blown and Cast Film下载, 可到相关下载区下载

熔体流动速率 [g/10min]: 2.0

Physical Properties	Metric	English	Comments

Specific Gravity	0.919 g/cc	0.919 g/cc	ASTM D1505
Melt Flow	2.0 g/10 min @Load 2.16 kg, Temperature 190 °C	2.0 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Film Elongation at Break, MD	580 %	580 %	ASTM D882
Film Elongation at Break, TD	780 %	780 %	ASTM D882
Coefficient of Friction	>= 1.0	>= 1.0	ASTM D1894
Elmendorf Tear Strength, MD	11.8 g/micron	300 g/mil	ASTM D1922
Elmendorf Tear Strength, TD	21.7 g/micron	550 g/mil	ASTM D1922
Dart Drop	5.51 g/micron	140 g/mil	ASTM D1709
Film Tensile Strength at Break, MD	43.0 MPa	6240 psi	ASTM D882
Film Tensile Strength at Break, TD	33.0 MPa	4790 psi	ASTM D882
1% Secant Modulus, MD	200 MPa	29000 psi	ASTM D882
1% Secant Modulus, TD	214 MPa	31000 psi	ASTM D882

Optical Properties	Metric	English	Comments
Haze	3.0 %	3.0 %	ASTM D1003
Gloss	140 %	140 %	at 60°; ASTM D523

Processing Properties	Metric	English	Comments
Melt Temperature	271 °C	520 °F
Extruder Size	6.35 cm	2.50 in

关键词:
供应
LLDPE
Chevron Phillips MarFlex® 7120X Hexene Linear Low Density Polyethylene
Blown and Cast Film

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-39916.html

免责声明: 本文 Chevron Phillips MarFlex® 7120X Hexene Linear Low Density Polyethylene, Blown and Cast Film 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息