Dow DOWLEX™ 2503 Linear Low Density Polyethylene, Narrow MW Distribution物性表参数

Dow DOWLEX™ 2503 Linear Low Density Polyethylene, Narrow MW Distribution

Dow DOWLEX™ 2503 Linear Low Density Polyethylene, Narrow MW Distribution 物性表: Dow DOWLEX™ 2503 Linear Low Density Polyethylene, Narrow MW Distribution物性表及特性介绍,Dow DOWLEX™ 2503 Linear Low Density Polyethylene, Narrow MW Distribution注塑参数详情,如需Dow DOWLEX™ 2503 Linear Low Density Polyethylene, Narrow MW Distribution下载, 可到相关下载区下载

熔体流动速率 [g/10min]: 105.0
密度 [g/cm3]: 0.93
缺口冲击强度: 23.0
拉伸强度 [MPa]: 10.6
弯曲强度 [MPa]: 8.2
弯曲模量 [MPa]: 0.503

Physical Properties	Metric	English	Comments

Density	0.930 g/cc	0.0336 lb/in³
Viscosity	21000 cP @Shear Rate 5000 1/s, Temperature 190 °C	21000 cP @Shear Rate 5000 1/s, Temperature 374 °F	Apparent Dynamic Viscosity
	29000 cP @Shear Rate 1000 1/s, Temperature 190 °C	29000 cP @Shear Rate 1000 1/s, Temperature 374 °F	Apparent Dynamic Viscosity
	31000 cP @Shear Rate 300 1/s, Temperature 190 °C	31000 cP @Shear Rate 300 1/s, Temperature 374 °F	Apparent Dynamic Viscosity
Melt Flow	105 g/10 min @Load 2.16 kg	105 g/10 min @Load 4.76 lb	Melt flow ratio I10/I2 is 6.5.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	8.20 MPa	1190 psi
Tensile Strength, Yield	10.6 MPa	1540 psi
Elongation at Break	450 %	450 %
Modulus of Elasticity	0.273 GPa	39.6 ksi	Molded Sample 2% Secant Modulus
Flexural Modulus	0.503 GPa	73.0 ksi
Izod Impact, Notched (ISO)	23.0 kJ/m² @Temperature -50.0 °C	10.9 ft-lb/in² @Temperature -58.0 °F

Thermal Properties	Metric	English	Comments
Vicat Softening Point	100 °C	212 °F

关键词:
供应
LLDPE
Narrow MW Distribution
Dow DOWLEX™ 2503 Linear Low Density Polyethylene

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-40172.html

免责声明: 本文 Dow DOWLEX™ 2503 Linear Low Density Polyethylene, Narrow MW Distribution 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息