Borealis Bormed™ LE6607-PH LDPE for Pharmaceutical Blow Molding物性表参数

Borealis Bormed™ LE6607-PH LDPE for Pharmaceutical Blow Molding

Borealis Bormed™ LE6607-PH LDPE for Pharmaceutical Blow Molding 物性表: Borealis Bormed™ LE6607-PH LDPE for Pharmaceutical Blow Molding物性表及特性介绍,Borealis Bormed™ LE6607-PH LDPE for Pharmaceutical Blow Molding注塑参数详情,如需Borealis Bormed™ LE6607-PH LDPE for Pharmaceutical Blow Molding下载, 可到相关下载区下载

熔体流动速率 [g/10min]: 0.3
密度 [g/cm3]: 0.927
拉伸强度 [MPa]: 12.0
弯曲模量 [MPa]: 0.320

Physical Properties	Metric	English	Comments

Density	0.927 g/cc	0.0335 lb/in³	ISO 1183
Melt Flow	0.30 g/10 min @Load 5.00 kg, Temperature 190 °C	0.30 g/10 min @Load 11.0 lb, Temperature 374 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	52	52	ISO 868
Tensile Strength, Yield	12.0 MPa	1740 psi	At 50 mm/min; ISO 527-2
Elongation at Break	700 %	700 %	At 5 mm/min; ISO 527-2
Flexural Modulus	0.320 GPa	46.4 ksi	At 2 mm/min; ISO 178

Processing Properties	Metric	English	Comments
Melt Temperature	165 - 200 °C	329 - 392 °F

关键词:
LDPE
供应
Borealis Bormed™ LE6607-PH LDPE for Pharmaceutical Blow Molding

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-40890.html

免责声明: 本文 Borealis Bormed™ LE6607-PH LDPE for Pharmaceutical Blow Molding 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息