- 熔体流动速率 [g/10min]: 1.0
- 密度 [g/cm3]: 0.922
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 0.922 g/cc | 0.0333 lb/in³ | ASTM-D792 | ||
| Melt Flow | 1.0 g/10 min @Load 2.16 kg, Temperature 190 °C | 1.0 g/10 min @Load 4.76 lb, Temperature 374 °F | ASTM-D1238 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Film Elongation at Break, MD | 350 % | 350 % | ASTM-D882 | ||
| Film Elongation at Break, TD | 620 % | 620 % | ASTM-D882 | ||
| Secant Modulus, MD | 0.120 GPa | 17.4 ksi | 2% Secant Modulus; ASTM-D882 | ||
| Secant Modulus, TD | 0.130 GPa | 18.9 ksi | 2% Secant Modulus; ASTM-D882 | ||
| Elmendorf Tear Strength MD | 310 g | 310 g | ASTM-D1922 | ||
| Elmendorf Tear Strength TD | 240 g | 240 g | ASTM-D1922 | ||
| Elmendorf Tear Strength, MD | 6.20 g/micron | 157 g/mil | ASTM-D1922 | ||
| Elmendorf Tear Strength, TD | 4.80 g/micron | 122 g/mil | ASTM-D1922 | ||
| Dart Drop | 3.40 g/micron | 86.4 g/mil | ASTM-D1709 | ||
| Dart drop Test | 170 g | 0.375 lb | ASTM-D1709 | ||
| Film Tensile Strength at Break, MD | 23.0 MPa | 3340 psi | ASTM-D882 | ||
| Film Tensile Strength at Break, TD | 21.0 MPa | 3050 psi | ASTM-D882 | ||
| Optical Properties | Metric | English | Comments | ||
| Haze | 9.5 % | 9.5 % | ASTM-D1003 | ||
| Gloss | 58 % | 58 % | Angle 45°; ASTM-D2457 | ||
| 85 % | 85 % | Angle 60°; ASTM-D2457 | |||
| Processing Properties | Metric | English | Comments | ||
| Die Opening | 0.100 cm | 0.0394 in | Blow Film Extrusion | ||
| Blow-up Ratio (BUR) | 2.0 - 3.0 | 2.0 - 3.0 | Blow Film Extrusion | ||
| Descriptive Properties | |||||
| Mass Temperature (°C) | 175-185 | Blow Film Extrusion | |||
| Temperature Profile (°C) | 155-185 | Blow Film Extrusion | |||