Global G-2855 High Density Polyethylene, Blow Molding Grade物性表参数

Global G-2855 High Density Polyethylene, Blow Molding Grade

Global G-2855 High Density Polyethylene, Blow Molding Grade 物性表: Global G-2855 High Density Polyethylene, Blow Molding Grade物性表及特性介绍,Global G-2855 High Density Polyethylene, Blow Molding Grade注塑参数详情,如需Global G-2855 High Density Polyethylene, Blow Molding Grade下载, 可到相关下载区下载

熔体流动速率 [g/10min]: 0.35
密度 [g/cm3]: 0.955
拉伸强度 [MPa]: 29.0
弯曲强度 [MPa]: 36.0

Physical Properties	Metric	English	Comments

Density	0.955 g/cc	0.0345 lb/in³	ASTM D792
Melt Flow	0.35 g/10 min @Load 2.16 kg, Temperature 190 °C	0.35 g/10 min @Load 4.76 lb, Temperature 374 °F	Condition E; ASTM D1238

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	36.0 MPa	5220 psi	ASTM D638
Tensile Strength, Yield	29.0 MPa	4210 psi	ASTM D638
Elongation at Break	2000 %	2000 %	ASTM D638

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-42724.html

免责声明: 本文 Global G-2855 High Density Polyethylene, Blow Molding Grade 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息